COOSPO BC200 User Manual

Button Function

The device features several buttons for navigation and control:

• Up Button (▲): Long press to turn the backlight on/off.
• Down Button (▼): Long press to turn the device off. Short press to turn the device on. The device automatically shuts down after 10 minutes of inactivity when not in motion.
• OK Button (✔): During cycling, press to mark the lap.
• Back Button (⏸): During cycling, press to pause.

The device display shows:

• GPS Status: Indicates GPS signal acquisition.
• Time: Displays the current time.
• Temperature & Battery Level: Shows ambient temperature and battery status.

The main interface includes icons for:

• Cycling
• Table
• Bike
• User
• Sensor
• History
• Sync
• GPS
• Setting

Icons and Descriptions

Standard Accessories

The package includes the following items:

• Main Device x1
• Charging Cable x1
• User Manual x1
• Out Front Bike Mount x1
• Rubber Pad for Out Front Mount x2
• Standard Bike Mount x1
• Rubber Pad for Standard Bike Mount x1
• Rubber Ring (Big x 2, Small x 2)
• Screw Wrench x1

How to Install

a. Standard Mount Installation

1. Install the rubber pad onto the mount.
2. Tie the mount onto the handlebar using the rubber rings.
3. Tie up the mount securely.
4. Install the main device onto the mount.
5. Rotate the main device for 90 degrees to lock it in place.
6. Installation is now completed.

b. Out Front Mount Installation

1. Install the rubber pad onto the handlebar.
2. Unscrew the screw in the mount.
3. Install the mount onto the handlebar on the rubber pad, then tighten up the screw.
4. Install the main device onto the mount.
5. Rotate the main device for 90 degrees to lock it in place.
6. Installation is now completed.

Charging

1. Please charge the device before first-time use.
2. Use a DC 5V power adapter for charging.
3. During charging, the battery icon will flash until fully charged.

To charge, open the rubber cover on the device and connect it with the USB cable to a USB DC 5V power adapter or computer.

Initial Setup

1. Language Selection

For the first-time use, please select the language before proceeding.

• English
• 简体中文 (Chinese)

2. User Profile Setting

To ensure accurate exercise calculations, set your user profile correctly:

• Gender: Male / Female
• Age: [Enter Age]
• Weight: [Enter Weight]
• Height: [Enter Height]

3. Bike Profile Setting

Configure your bike settings:

• Bike 1: Activate [On/Off]
• Bike 2:
• Bike 3:
• Activate: [On/Off]
• Weight: [Enter Bike Weight]
• Wheel: [Enter Wheel Circumference, e.g., 2096mm]
• Total Distance: Select and confirm to reset the total distance.
• Spd Source: Set the priority for the source of the speed (e.g., Speed & Cadence sensor).

Common Wheel Size and Circumference

Other Settings

• Zone: Set values for heart rate zones, power zones, and cadence zones.
• Alarm: Configure alarms for heart rate, power, and cadence. The device will beep and display a warning message when preset values are reached during cycling.
• Smart Pause: When enabled, the cycling recording pauses automatically when the speed is 0 and resumes when speed is detected.
• Altitude: Calibrate the current altitude by entering numerical values.
• Smart Lap: Set the location or distance for smart lap counting.
• Tone: Adjust the key tone and warning tone.
• Back Light: Configure the backlight mode, including how it turns off and its brightness.

Page Setting

1. Display Content

Customize the display content for each page:

• Data Page 1-5: Set to 'On' or 'Off'.
• Switch/Sec: Options include Manual, 10 Sec, 15 Sec, 20 Sec.

Self-defined parameters can be set in Data Pages 1-5.

2. Data Fields

Select the parameters to be displayed in self-defined pages. You can choose from various data fields such as Speed, Distance, Time, Heart Rate, Cadence, Power, Altitude, Temperature, and Calorie, along with their corresponding metrics (e.g., Avg.HR, Max.HR, %LTHR, Lap.Avg.HR, L.Lap.Avg.HR).

Connecting the Sensors

Ensure sensors are in wake-up mode (e.g., wear the heart rate monitor, rotate the crank for cadence/speed/power sensors).

• Sensor Manage: You can set up to 3 bikes for sensor selection.
• Bike Selection: Choose the desired bike profile.
• Sensor Type: Select the type of sensor for connection (HeartRate, Speed, Cadence, Spd&Cad, Power).
• Search: The device searches for available sensors.
• Pairing: Select scanned sensors to pair with the device.

Connection Process:

1. After selecting a sensor (e.g., Cadence with ID 1234567), the device shows 'Connection completed'.
2. To add a new sensor or turn off an old one, select the desired sensor and choose 'Connect New' or 'Turn Off' from the pop-up window.

Power Calibration

Power calibration is available for ANT+ power meters only. Bluetooth power meters do not support this function.

To calibrate, select 'Power' and then choose 'Calibrate' from the pop-up window. The device will show the current value and calibration progress.

Starting a Ride

1. When the device is turned on, it automatically searches for satellite signals. This may take 15-90 seconds. Ensure the satellite signal is acquired for the first use.
2. Connect with your phone and sync the time first.

The device display will show real-time data during a ride, including Speed, Distance, Time.Move, Heart Rate, Cadence, Power, Altitude, Temperature, and Calorie.

Display and Button Functions

• Scroll Up/Down: Use the up/down buttons to navigate through the display.
• Accessories Connection Status: An icon will blink when an accessory is disconnected and remain on when connected.
• Mark Lap: Press the OK button (✔) during cycling to mark a lap.
• Pause: Press the Back button (⏸) during cycling to pause the activity.

View History

Access past ride data:

• Navigate to the 'History' section.
• Select a specific ride entry (e.g., 2019/10/21 16:35).
• View detailed information including Move Time, Distance, Heart Rate (Avg/Max), Speed (Avg/Max), Cadence (Avg/Max), and Power (Avg/Max).
• The history section shows page numbers and total entries (e.g., Page 1/7, Total 45).

Sync Data

USB Connection

1. Turn on the device's 'USB connection' sync function.
2. Connect the device to your computer using a USB cable.
3. Your computer will recognize the device as a new disk. Locate the 'fit activity' folder and copy the files to your computer.
4. Upload the activity file (.fit) to www.strava.com to view your data.

Bluetooth Connection

1. Download the 'CoospoRide' app from Google Play or the App Store.
2. On the bike computer, go to 'Sync' and select 'BLE Connect' to enable Bluetooth.
3. Open the Coosporide app, turn on your phone's Bluetooth, and go to 'bind your computer'.
4. Select 'BC200' to enter searching status.
5. Click 'BC200-xxxxxxx' to connect.

Applicable Smart Phones:

• iOS 7.0 or above, iPhone 4s model or above.
• Android 4.3 or above with Bluetooth 4.0.

Specifications

Attentions and Disclaimer

Attentions: The information in this manual is for reference only. The product may be subject to alteration due to manufacturer's ongoing research and development plans without prior notice.

Disclaimer: The information provided is for reference only. Products may change without prior announcement. COOSPO shall not be liable for any direct or indirect damages, losses, or expenses arising from the use of this manual or the product.

Regulatory Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device.

French translation of IC Statement conditions: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1 L' appareil ne doit pas produire de brouillage; 2 L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Product Disposal and Safety

• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, call COOSPO support.
• The product must be returned to the manufacturer for any service or repair.