Domus Line Smally, Smally XS, Cubit, and Quadrum LED Spotlights
Installation Instructions
Product Information
Brand: Domus Line
Models: Smally, Smally XS, Cubit, Quadrum
Power: 3W 12VDC / 3W 24VDC
Ingress Protection: IP44
Manufacturer: Domus Line S.r.l., Via Maestri del Lavoro, 1, I-33080 Porcia (Pordenone), Italy
Website: www.domusline.com
Installation Guide
This document provides instructions for installing various Domus Line LED spotlight models.
Smally / Smally XS (Cubit / Quadrum)
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 12VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally (XS) SP
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 12VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally (XS) OB
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 12VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally / Smally XS (OB) (SP) Cubit / Quadrum
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 12VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally 24 / Smally XS 24 (Cubit 24 / Quadrum 24)
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally (XS) D-M (Cubit D-M / Quadrum D-M)
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally (XS) SP D-M
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally (XS) OB D-M
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally D-M / Cubit D-M / Quadrum D-M
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Smally D-M / Cubit D-M / Quadrum D-M (OB-SP)
Required Hole Diameter: min. Ø8mm, Ø57mm
Mounting Depth: 12mm
Installation Steps:
- Drill a hole with a minimum diameter of 8mm and a diameter of 57mm.
- Ensure a mounting depth of at least 12mm.
- Connect the spotlight to the power supply as per the wiring diagram.
- Secure the spotlight in the mounting hole.
Wiring Diagram:
Connect the 24VDC Power Supply to a 220-240 VAC source. The diagram shows connections for LED power and switching.
Safety and Compliance
- Electrical Safety: Ensure power is disconnected before installation. Follow all local electrical codes.
- WEEE Symbol: Indicates that the product should not be disposed of with household waste. Please recycle at designated collection points.
- Warning Symbols: Pay attention to warning symbols indicating potential hazards or important information.
Product Variants
The following product variants are covered in this documentation:
- Smally
- Smally XS
- Smally SP
- Smally XS SP
- Smally OB
- Smally XS OB
- Cubit
- Quadrum
- Smally D-M
- Smally XS D-M
- Cubit D-M
- Quadrum D-M
- Smally 24
- Smally XS 24
- Smally 24 SP
- Smally XS 24 SP
- Smally 24 OB
- Smally XS 24 OB
- Cubit 24
- Quadrum 24
File Info : application/pdf, 3 Pages, 2.98MB
DocumentDocumentReferences
Related Documents
 |
Domus Line PRO LED SPOTLIGHT Kollektion für Möbelbeleuchtung Entdecken Sie die Domus Line PRO LED SPOTLIGHT Kollektion – integrierte und moderne Beleuchtungslösungen für Möbel. Hochwertige Spots mit fortschrittlicher Technologie für stilvolle Wohn- und Arbeitsbereiche. |
 |
Domus Line PIR 2.0 Motion Sensor: Installation Guide & Technical Specs Learn how to install and use the Domus Line PIR 2.0 motion sensor. This guide covers 12Vdc/24Vdc wiring, detection zones, placement tips, and adjustments for optimal lighting control. |
 |
Domus Line IR Sensor Series: Installation and Operation Guide Installation and operation guide for Domus Line IR 2.0, IR 3.0, and IR 4.0 sensor series. Covers technical specifications, wiring diagrams, setup procedures, material options, and operational modes for LED cabinet lighting. |
 |
Domus Line TOM Series LED Lighting Control Instructions User guide for Domus Line TOM, TOM D-M, and TOM D-MWA LED lighting controls, detailing installation, ON/OFF functions, and dimming features for 12Vdc and 24Vdc systems. |
 |
Domus Line PIR 2.0 Motion Sensor Control Unit - Technical Overview Detailed technical overview of the Domus Line PIR 2.0 motion sensor control unit, including specifications, accessories, operation, and installation guidelines for LED lighting systems. |
 |
Domus Line MINI POLY ECB Lighting Control System: Installation and Operation Guide Comprehensive guide for Domus Line's MINI POLY ECB lighting control system, covering IR-1, TOUCH-1, PIR-1, PIR-2, and D-MWA sensors. Includes installation diagrams, operating instructions, and technical specifications. |
 |
Domus Line RC3 Multichannel Remote Control System for LED Lighting Comprehensive overview of the Domus Line RC3 multichannel remote control and CALL ME ECB receiver unit, detailing features, specifications, operation, and pairing for 24VDC LED luminaires. |
 |
Domus Line Flexyled CR HE Flexible LED Lighting System Explore the Domus Line Flexyled CR HE, a flexible LED lighting profile offering symmetrical light projection. View technical specifications, performance data, and accessories for this versatile lighting solution. |