SINGER 61W41, W42
The Singer Manufacturing Company
List of Parts
For Machines Nos. 61w41 and 61w42
Index
| Index Item | Page |
|---|---|
| ACCESSORIES | 26 |
| BINDER AND FOLDER | 29 |
| BOBBIN WINDER | 26 |
| FEED DOGS | 32 |
| KNEE LIFTER | 27 |
| KNIFE GRINDER | 29 |
| MACHINE NO. 61w41 | 7 |
| 61w42 | 17 |
| NUMERICAL LIST OF PARTS | 35 |
| OBSOLETE PARTS | 32 |
| RIBBON REEL | 28 |
| THROAT PLATES | 30 |
Instructions for Ordering
In ordering from this list, use ONLY the PART number in the FIRST column.
The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Screws, Clamping Screws, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc., which it is necessary to furnish in combination.
Every combination of parts sent out has its specific number which, although not stamped on Parts (except in above cases) must be used when ordering the combination.
Each number always indicates the SAME PART in whatever list it appears, or for whatever Machine.
The letters after some of the numbers indicate the style of finish only, as follows:
- A. Hardened, Polished and Plated.
- B. Polished and Plated.
- C. Hardened only.
- D. Polished only.
- E. Soft, not polished.
- F. Hardened and Polished.
- H. Blued.
These letters MUST BE USED when they appear in the list and AFTER the number, as in the list.
In this series:
- 200001 to 201500 are Screw Numbers.
- 201501 to 201800 are Nut Numbers.
- 201801 to 202000 are Roller Numbers.
- 202001 and upward are numbers of Machine Parts.
The figures in the second column refer only to the plate in which the illustration of the part is shown and are NOT TO BE USED in ordering.
Two or more numbers over a cut indicate that the difference between such parts is not visible in an illustration.
Parts marked with an asterisk (*) are furnished only when repairs are made at the factory.
MACHINE No. 61w41
VERTICAL SEAM TRIMMER AND BINDER
For Trimming and Binding Light and Medium Fabrics at One Operation, Using Folded Binding. For Ladies' Waists, Dresses, Muslin Underwear, Wrappers, Etc., Also for Binding and Set-ting in Sleeves. Knife on Hinged Arm and Can Be Thrown In or Out of Action.
| No. | Plate | Name |
|---|---|---|
| *206921 | 10968 | Arm with 202243, 202245 and two 2003380 |
| 207073 | 10968 | Arm Bushing Hole Plug |
| 2003520 | 10248 | Hole Plug Set Screw |
| 203091 | 10954 | Cap |
| 200278日 | 10244 | Screw |
| 202248 | 10244 | Washer |
| 203089 | 10947 | Spool Holder Base |
| 203090 | 10947 | Arm Cap Spool Holder Base 203089 with 200079 and 204296 |
| 2005851 | 10373 | Arm Cap Spool Holder Base Screw |
| 204296 | 10947 | Screw |
| 2000791 | 10668 | Wire |
| 203092 | Arm Cap and Spool Holder complete, Nos. 203090, 203091 and two 2005851 | |
| 204235 | 10668 | Arm Position Pin |
| 200010E | 10245 | Screw (3) |
| 202005 | 10245 | Washer (3) |
| 206923 | 10955 | Shaft with 200357 and 203100 |
| 202243 | 10947 | Bushing (back) with 202244 |
| 202244 | Arm Shaft Bushing (back) Oil Packing (wick) | |
| 2003380 | 10244 | Arm Shaft Bushing (back) Set Screw |
| 202245 | 10947 | Arm Shaft Bushing (front) with 202036 and 202260 |
| 202260 | Arm Shaft Bushing (front) Oil Packing (wick) | |
| 200502в | 10246 | Arm Shaft Bushing (front) Oil Packing Thumb Screw |
| 202036 | 10668 | Arm Shaft Bushing (front) Position Pin |
| 2003380 | 10244 | Arm Shaft Bushing (front) Set Screw |
| 202530 | 10955 | Arm Shaft Connection Belt Pulley |
| 202252 | 10244 | with 2003270, 200602e and two 202253 |
| 200602 | 10244 | Arm Shaft Connection Belt Pulley Position Screw |
| 2003270 | 10244 | Arm Shaft Connection Belt Pulley Set Screw |
| 202253 | 10244 | Arm Shaft Connection Belt Pulley Spring Flange |
| 203100 | Arm Shaft Oil Packing (wick) | |
| 200357E | 10244 | Stop Screw |
| 202255 | 10948 | Balance Wheel (belt groove 24 in. diam.) with 200328 and 2003350 |
| 200328 | 10244 | Balance Wheel Position Screw |
| 2003350 | 10244 | Set Screw |
| *206924 | Bed with 202872 | |
| 202258 | 12345 | Hinge Connection (2) |
| 2005705 | 10245 | Screw (4) |
| 210616 | 10947 | Slide (front) |
| 203090 | 10947 | Binder Base Plate with five 226015 |
| 206925 | 10947 | Binder Base Plate Screw (2) |
| 2001610 | 206927, | 225647, 230251 and two 200155г |
| 2000791 | 10668 | Wire |
| 2005771 | 10245 | Hinge Screw |
| 206927 | 10917 | Guard Screw |
| 203092 | Head, made for tapes or fold-ed strips, from to in., in steps of inch | |
| 204235 | 10668 | Arm Position Pin |
| 200010E | 10245 | Screw (3) |
| 200155 | 10949 | Binder Head Screw |
| 202005 | 10245 | Washer (3) |
| 230251 | 10951 | Washer |
| 226015 | 10951 | Tape Tension Pin |
| 202265 | 10964 | Bobbin Case |
| *202806 | Bobbin Case | |
| 202267 | 10964 | Latch Pin |
| *202056 | Pin | |
| 202269 | 10964 | Plunger |
| 202270 | 10964 | Spring |
| 202716 | 10964 | Tension Spring |
| 2009840 | 10964 | Regulat-ing Screw |
| 202533 | 10964 | Bobbin Case Tension Spring Screw |
| 2005940 | 10964 | Bobbin Case complete, Nos. 200594c, 2009840, 202056, 202267, 202269, 202270, 202716 and 202806 |
| 206951 | 10947 | Face Plate |
| 206929 | 10953 | Feed Bar with 206970 |
| 2006410 | 10246 | Hinge Screw (driving) |
| 201522E | 10246 | Nut |
| 202756 | 10953 | Lifting Connection Link |
| 206932 | Bushing | |
| 206970 | Feed Bar Lifting Connection Link Bushing (for Feed Bar) | |
| 200182 | 10949 | Feed Bar Lifting Connection Link |
| 207025 | 10968 | Stop Screw |
| 200106E | 10245 | Feed Dog |
| 202297 | 10948 | Screw (2) |
| 202298 | 10245 | Driving Connection with 200054 and 202277 |
| 200054 | 10246 | Feed Driving Connection Crank with 2000380 |
| 2000380 | 10245 | Feed Driving Connection Crank Pinch Screw |
| 2005450 | 10245 | Feed Driving Connection Hinge Screw |
| 201518E | 10245 | Feed Driving Connection Hinge Screw Nut |
| 202277 | Feed Driving Connection Oil Packing (wick) | |
| 200054E | 10246 | Feed Driving Connection Pinch Screw |
| 202300 | 10246 | Feed Driving Eccentric Regulating Bracket |
| 203134 | Feed Driving Eccentric Regulating Bracket 202309 with 202252, two each 2010140 and 201525E | |
| 2010140 | 10245 | Feed Driving Eccentric Regulating Bracket Hinge Screw |
| 201525E | 10245 | Feed Driving Eccentric Regulating Bracket Hinge Screw Nut |
| 202301 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger |
| 202595 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger Spring |
| 2006070 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger Spring Stop Screw |
| 2010140 | 10245 | Feed Driving Eccentric Regulating Bracket Stop Screw |
| 201525 | 10245 | Feed Driving Eccentric Regulating Bracket Stop Screw Nut |
| 200429 | 10246 | Feed Driving Eccentric Regulating Screw |
| 2003830 | 10246 | Feed Driving Eccentric Regulating Screw Check Screw |
| 202303 | 10948 | Feed Driving Rock Shaft |
| 206931 | with 200182E, 2006410, 201522E, 202756 and 206929 | |
| 202305 | 10245 | Feed Driving Rock Shaft Center (2) |
| 200430 | 10246 | Feed Driving Rock Shaft Center Set Screw (2) |
| 202306 | 10948 | Feed Lifting Connection with 200054 and 202277 |
| *206948 | Feed Lifting Connection Crank | |
| 206952 | 10954 | 206948 with 2000380 and 2003780 |
| 2000380 | 10245 | Feed Lifting Connection Crank Pinch Screw |
| 2003780 | 10668 | Feed Lifting Connection Crank Set Screw |
| 202307 | 10246 | Feed Lifting Connection Eccentric with 2003820 and 2004370 |
| 2004370 | 10246 | Feed Lifting Connection Eccentric Position Screw |
| 2003820 | 10373 | Feed Lifting Connection Eccentric Set Screw |
| 2005450 | 10245 | Feed Lifting Connection Hinge Screw |
| 201518E | 10245 | Feed Lifting Connection Hinge Screw Nut |
| 202277 | Feed Lifting Connection Oil Packing (wick) | |
| 200054E | 10246 | Feed Lifting Connection Pinch Screw |
| 206933 | 10955 | Feed Lifting Rock Shaft (hollow) and Hook Shaft Bearing with 206932 |
| 202625 | 10949 | Feed Lifting Rock Shaft Stop Collar with two 200383 |
| 2003830 | 10246 | Feed Lifting Rock Shaft Stop Collar Set Screw |
| 207070 | 10947 | Feed Regulating Spindle with 202311, 202443, 202619 and 210554 |
| *202311 | Feed Regulating Spindle Head | |
| 202443 | 10244 | Pin |
| 202619 | 10668 | Position Pin |
| 210554 | (flat) | |
| *206776 | Hook (sewing) | |
| 206777 | 10964 | 206776 with 2001451, 200596г, 2006140, 202320, 203101, 206751, 206775 and 206852 |
| 206740 | Hook and Bobbin Case complete, Nos. 202533 and 206777 | |
| 206852 | 10964 | Hook Gib |
| 2006140 | 10964 | Hinge Screw |
| 200596F | 10964 | Screw |
| 202320 | Oil Wick | |
| 203101 | Shaft, 11 in. long | |
| *202323 | 10244 | Connection Belt Pulley with 202324 and two 2010180 |
| 2010180 | 10968 | Hook Shaft Connection Belt Pulley Set Screw |
| 202324 | Hook Shaft Connection Belt Pulley Spring Flange | |
| 202260 | Hook Shaft Oil Packing (wick) (2) | |
| 206775 | 10968 | Pin |
| 206751 | 10968 | Washer |
| 2001451 | 10964 | Screw |
| 202445 | 10958 | Knee Lifter Connection Lever with 202446 |
| 202877 | Knee Lifter Connection Lever 202445 with 2002241, 2002621, 202447 and 202876 | |
| 200224 | 10248 | Knee Lifter Connection Lever Hinge Screw |
| 202447 | 10958 | Knee Lifter Connection Lever Lifting Rod with 202302 |
| 202302 | 10248 | Knee Lifter Connection Lever Lifting Rod Cotter Pin |
| 202446 | 10246 | Knee Lifter Connection Lever Pin |
| 202876 | 10958 | Lifting Lever Hinge Screw |
| 2002621 | 10248 | Screw |
| 207065 | 10951 | Knife Arm Base Plate with two 200061D |
| 207066 | 10967 | Knife Arm Base Plate |
| 207067 | 10967 | Knife Arm Base Plate 207063 with 207062 and two 207065 |
| 207068 | 10967 | Knife Arm Base Plate Position Plate |
| 207011 | 10953 | Knife Arm Base Plate Position Plate Screw (2) |
| 200574E | 10949 | Knife Arm Base Plate Screw |
| 2005400 | 10949 | Knife Arm Center |
| 202622 | 10949 | Set Screw |
| 207065 | 10951 | Driving Link |
| 200061D | 10968 | Hinge Screw (lower) |
| 207006 | 10953 | Hinge Screw (upper) |
| 2009940 | 10949 | Knife Arm Driving Link Hinge Screw (lower) |
| 2009930 | 10949 | Knife Arm Driving Link Hinge Screw (upper) |
| 202887 | 10948 | Knife Bar |
| 206940 | 10949 | Cross Head |
| 207016 | 206940 with 2009936, 2009940 and 207006 | |
| 202889 | 10373 | Knife Bar Cross Head Screw (2) |
| 202890 | 10373 | Knife Bar Driving Eccentric with 2003820 and 2004370 |
| 2014640 | 10968 | Knife Bar Driving Eccentric Fork with 200382 and 2014640 |
| 2003820 | 10373 | Knife Bar Driving Eccentric Fork Position Screw |
| 2004370 | 10246 | Knife Bar Driving Eccentric Fork Set Screw |
| 2003820 | 10373 | Knife Bar Driving Eccentric Position Screw |
| 202891 | 10947 | Knife Bar Driving Shaft Crank with 200694 and 201525E |
| 200694F | 10373 | Knife Bar Driving Shaft Crank Screw Stud |
| 2015250 | 10245 | Knife Bar Driving Shaft Crank Screw Stud Nut |
| 202892 | 10373 | Knife Bar Friction Gib |
| 202893 | 10373 | Lifting Spring (spiral) |
| 202894 | 10949 | Bracket |
| 2005851 | 10373 | Screw (2) |
| 2004856 | 10373 | Knife Bar Lifting Spring Thumb Screw |
| 206949 | 10949 | Knife Bar Stop Plate (lower) Face Plate Hinge and Holder |
| 206950 | 10949 | Knife Bar Stop Plate (upper) and Face Plate Stop |
| 200582 | 10252 | Knife Bar Stop Plate Screw (4) |
| 2000760 | 10949 | Screw |
| 202898 | 10947 | Switch-out Handle with two 2003730 |
| 2003730 | 10373 | Knife Switch-out Handle Set Screw |
| 202899 | 10947 | (spiral) |
| 202900 | 10947 | Shaft |
| 202901 | 10949 | Needle Bar with 200141 |
| 202550 | Bushing | |
| 207022 | 202901 with 200086 | |
| 2000860 | 10248 | Needle Bar Connecting Stud Pinch Screw |
| 202328 | 10947 | Needle Bar Crank with 2003350, 2004280, 202333 and two 200374 |
| 203117 | Needle Bar Crank 202328 with 202329, 202331 and 202398 to 202400 | |
| 203172 | 10248 | Needle Bar Crank Friction Washer |
| 2004280 | 10248 | Position Screw |
| 2003350 | 10244 | Set Screw |
| 200141F | 10248 | Set Screw |
| 202335 | 10248 | Presser Bar (hollow) with 200074F |
| 207072 | 10249 | Bushing |
| 2003520 | 10248 | Set Screw |
| 202339 | 10249 | Lifter |
| 2006530 | 10249 | Hinge Screw |
| 202903 | 10949 | Lifting Releasing Lev-er Bracket |
| 200260D | 10249 | Presser Bar Lifting Releasing Lev-er Bracket Guide Screw |
| 202342 | 10249 | Presser Bar Lifting Releasing Lev-er Bracket Spring (spiral) |
| 202337 | 10249 | Presser Bar Position Guide |
| 202338 | 10249 | with 2000860 |
| 2000860 | 10248 | Presser Bar Position Guide Lever Pinch Screw |
| 2003520 | 10248 | Presser Bar Position Guide Set Screw |
| 202343 | 10949 | Presser Bar Spring |
| 202346 | 10249 | Stop Rod |
| 2004923 | 10249 | Thumb Screw (pres-sure regulating) |
| 202090 | 10949 | Presser Foot Hinge Pin |
| 200368 | 10668 | Set Screw |
| 206943 | Plate | |
| 202923 | Shank | |
| 206944 | 10951 | Presser Foot (hinged) complete, for trimming margins from to in., in steps of in., Nos. 202090, 202923 and 206943 |
| 200074 | 10249 | Presser Foot Screw |
| 202397 | 10668 | Take-up (auxiliary) |
| 2008425 | 10668 | Lever |
| 202398 | 10247 | Screw |
| 202399 | 10247 | Driving Stud with 202277 |
| 202277 | Take-up Lever Driving Stud Oil Packing (wick) | |
| 202400 | 10247 | Take-up Lever Hinge Stud with 202423 |
| 202423 | Take-up Lever Hinge Stud Oil Packing (wick) | |
| 2003830 | 10246 | Take-up Lever Hinge Stud Set Screw |
| 202401 | 10247 | Take-up Lever Oiling Felt |
| 200132 | 10247 | Screw |
| 202402 | 10247 | Tension Dise (back) |
| 202403 | 10247 | Screw |
| 202404 | 10247 | Release Plunger |
| 202405 | 10247 | Washer |
| 202407 | 10881 | Spring |
| 200625F | 10247 | Stud with 204925 |
| 200084 | 10968 | Set Screw |
| 204925 | 10668 | Washer |
| 2015728 | 10881 | Thumb Nut |
| 202409 | 10252 | Tension complete, Nos. 200625F, 201572в, 202102, 202403, 202405, 202407 and 202410 |
| 202410 | 10252 | Thread Controller Spring |
| 202411 | 10252 | Guide |
| 200132E | 10247 | Stop |
| 202412 | 10252 | Screw |
| 202413 | 10252 | Lever |
| 202414 | 10252 | Screw |
| 202415 | 10252 | Set Screw |
| 202979 | 10252 | Retainer Sleeve |
| 2005821 | 10252 | Spring |
| 2003551 | 10252 | Stud |
| 2003681 | 10668 | Set Screw |
| 202091 | 10252 | Retainer Sleeve |
| 202092 | 10252 | Spring |
| 204058 | 10252 | Stud |
| 2003681 | 10668 | Set Screw |
| 204059 | 10668 | Thread Retainer complete, Nos. 202091, 202092 and 204058 |
| 207017 | Throat Plate, 50 needle hole, for needle sizes 14 and 15, with 202534, 207069 and two 200582n.. | |
| 202534 | 10668 | Throat Plate Bobbin Case Stop Screw |
| 200582 | 10252 | Screw |
| 207013 | 10951 | Throat Plate Knife Cutting Plate, for trimming margins from to in., in steps of inch. |
| 207069 | 10968 | Throat Plate Knife Cutting Plate Position Pin |
| 200583 | 10668 | Throat Plate Knife Cutting Plate Screw |
| 207018 | 10956 | Throat Plate complete, 50 needle hole, for needle sizes 14 and 15, for trimming margins from to in., in steps of in., Nos. 200583, 207013 and 207017 |
| 202872 | 10668 | Throat Plate Position Pin |
| 200576日 | 10968 | Screw (2) |
MACHINE NO. 61w42
VERTICAL SEAM TRIMMER
For Light and Medium Fabrics. Knife on Hinged Arm and Can Be Thrown In or Out of Action.
| No. | Plate | Name |
|---|---|---|
| *206921 | 10968 | Arm with 202243, 202245 and two 2003380 |
| 207073 | 10968 | Arm Bushing Hole Plug |
| 2003520 | 10248 | Hole Plug Set Screw |
| 203091 | 10954 | Cap |
| 200278日 | 10244 | Screw |
| 202248 | 10244 | Washer |
| 203089 | 10947 | Spool Holder Base |
| 203090 | 10947 | Arm Cap Spool Holder Base 203089 with 200079n and 204296 |
| 200585 | 10373 | Arm Cap Spool Holder Base Screw |
| 204296 | 10947 | Screw |
| 2000791 | 10668 | Wire |
| 203092 | Arm Cap and Spool Holder complete, Nos. 203090, 203091 and two 2005851 | |
| 204235 | 10668 | Arm Position Pin |
| 200010E | 10245 | Screw (3) |
| 202005 | 10245 | Washer (3) |
| 206923 | 10955 | Shaft with 200357e and 203100 |
| 202243 | 10947 | Bushing (back) with 202244 |
| 202244 | Arm Shaft Bushing (back) Oil Packing (wick) | |
| 2003380 | 10244 | Arm Shaft Bushing (back) Set Screw |
| 202245 | 10947 | Arm Shaft Bushing (front) with 202036 and 202260 |
| 202260 | Arm Shaft Bushing (front) Oil Packing (wick) | |
| 200502в | 10246 | Arm Shaft Bushing (front) Oil Packing Thumb Screw |
| 202036 | 10668 | Arm Shaft Bushing (front) Position Pin |
| 2003380 | 10244 | Arm Shaft Bushing (front) Set Screw |
| 202530 | 10955 | Arm Shaft Connection Belt Pulley |
| 202252 | 10244 | with 2003270, 200602e and two 202253 |
| 200602 | 10244 | Arm Shaft Connection Belt Pulley Position Screw |
| 2003270 | 10244 | Arm Shaft Connection Belt Pulley Set Screw |
| 202253 | 10244 | Arm Shaft Connection Belt Pulley Spring Flange |
| 203100 | Arm Shaft Oil Packing (wick) | |
| 200357 | 10244 | Stop Screw |
| 202255 | 10948 | Balance Wheel (belt groove 24 in. diam.) with 200328 and 2003350 |
| 2003280 | 10244 | Balance Wheel Position Screw |
| 2003350 | 10244 | Set Screw |
| *206924 | Bed with 202872 | |
| 202258 | 12345 | Hinge Connection (2) |
| 200570 | 10245 | Screw (4) |
| 207004 | 10954 | Plate (back) |
| 200577 | 10245 | Screw (2) |
| 207001 | 10955 | (cover plate) |
| 2000920 | 10949 | Screw |
| 207002 | Slide (front) | |
| 207003 | 10954 | 207002 with 202115 and two 200130E |
| 202115 | Bed Slide (front) Spring | |
| 200139E | 10245 | Screw |
| 202265 | 10964 | Bobbin Case |
| *202806 | Bobbin Case | |
| 202267 | 10964 | Latch Pin |
| *202056 | Pin | |
| 202269 | 10964 | Plunger |
| 202270 | 10964 | Spring |
| 202716 | 10964 | Tension Spring |
| 2009840 | 10964 | Regulat-ing Screw |
| 202533 | 10964 | Bobbin Case Tension Spring Screw |
| 2005940 | 10964 | Bobbin Case complete, Nos. 2005940, 2009840, 202056, 202267, 202269, 202270, 202716 and 202806 |
| 206951 | 10947 | Face Plate |
| 206929 | 10953 | Feed Bar with 206970 |
| 200641c | 10246 | Hinge Screw (driving) |
| 201522E | 10246 | Nut |
| 202756 | 10953 | Lifting Connection Link |
| 206932 | Bushing | |
| 206970 | Feed Bar Lifting Connection Link Bushing (for Feed Bar) | |
| 200182 | 10949 | Feed Bar Lifting Connection Link |
| 207025 | 10968 | Stop Screw |
| 200106E | 10245 | Feed Dog |
| 202297 | 10948 | Screw (2) |
| 202298 | 10245 | Driving Connection with 200054 and 202277 |
| 200054 | 10246 | Feed Driving Connection Crank with 2000380 |
| 2000380 | 10245 | Feed Driving Connection Crank Pinch Screw |
| 2005450 | 10245 | Feed Driving Connection Hinge Screw |
| 201518E | 10245 | Feed Driving Connection Hinge Screw Nut |
| 202277 | Feed Driving Connection Oil Packing (wick) | |
| 200054E | 10246 | Feed Driving Connection Pinch Screw |
| 202300 | 10246 | Feed Driving Eccentric Regulating Bracket |
| 203134 | Feed Driving Eccentric Regulating Bracket 202300 with 202252, two each 2010140 and 201525г | |
| 2010140 | 10245 | Feed Driving Eccentric Regulating Bracket Hinge Screw |
| 2015251 | 10245 | Feed Driving Eccentric Regulating Bracket Hinge Screw Nut |
| 202301 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger |
| 202595 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger Spring |
| 2006070 | 10246 | Feed Driving Eccentric Regulating Bracket Plunger Spring Stop Screw |
| 2010140 | 10245 | Feed Driving Eccentric Regulating Bracket Stop Screw |
| 201525 | 10245 | Feed Driving Eccentric Regulating Bracket Stop Screw Nut |
| 2004290 | 10246 | Feed Driving Eccentric Regulating Screw |
| 2003830 | 10246 | Feed Driving Eccentric Regulating Screw Check Screw |
| 202303 | 10948 | Feed Driving Rock Shaft |
| 206931 | with 200182E, 2006410, 201522г, 202756 and 206929 | |
| 202305 | 10245 | Feed Driving Rock Shaft Center (2) |
| 200430 | 10246 | Feed Driving Rock Shaft Center Set Screw (2) |
| 202306 | 10948 | Feed Lifting Connection with 200054E and 202277 |
| *206948 | Feed Lifting Connection Crank | |
| 206952 | 10954 | 206948 with 2000380 and 2003780 |
| 2000380 | 10245 | Feed Lifting Connection Crank Pinch Screw |
| 2003780 | 10668 | Feed Lifting Connection Crank Set Screw |
| 202307 | 10246 | Feed Lifting Connection Eccentric with 2003820 and 2004370 |
| 2004370 | 10246 | Feed Lifting Connection Eccentric Position Screw |
| 2003820 | 10373 | Feed Lifting Connection Eccentric Set Screw |
| 2005450 | 10245 | Feed Lifting Connection Hinge Screw |
| 201518E | 10245 | Feed Lifting Connection Hinge Screw Nut |
| 202277 | Feed Lifting Connection Oil Packing (wick) | |
| 200054E | 10246 | Feed Lifting Connection Pinch Screw |
| 206933 | 10955 | Feed Lifting Rock Shaft (hollow) and Hook Shaft Bearing with 206932 |
| 202625 | 10949 | Feed Lifting Rock Shaft Stop Collar with two 200383 |
| 2003830 | 10246 | Feed Lifting Rock Shaft Stop Collar Set Screw |
| 207070 | 10947 | Feed Regulating Spindle with 202311, 202443, 202619 and 210554 |
| *202311 | Feed Regulating Spindle Head | |
| 202443 | 10244 | Pin |
| 202619 | 10668 | Position Pin |
| 210554 | (flat) | |
| *206776 | Hook (sewing) | |
| 206777 | 10964 | 206776 with 200145m, 200596F, 2006140, 202320, 203101, 206751, 206775 and 206852 |
| 206740 | Hook and Bobbin Case complete, Nos. 202533 and 206777 | |
| 206852 | 10964 | Hook Gib |
| 2006140 | 10964 | Hinge Screw |
| 200596F | 10964 | Screw |
| 202320 | Oil Wick | |
| 203101 | Shaft, 11 in. long | |
| *202323 | 10244 | Connection Belt Pulley with 202324 and two 201018c |
| 2010180 | 10968 | Hook Shaft Connection Belt Pulley Set Screw |
| 202324 | Hook Shaft Connection Belt Pulley Spring Flange | |
| 202260 | Hook Shaft Oil Packing (wick) (2) | |
| 206775 | 10968 | Pin |
| 206751 | 10968 | Washer |
| 2001451 | 10964 | Screw |
| 202445 | 10958 | Knee Lifter Connection Lever with 202446 |
| 202877 | Knee Lifter Connection Lever 202445 with 2002241, 2002621, 202447 and 202876 | |
| 200224 | 10248 | Knee Lifter Connection Lever Hinge Screw |
| 202447 | 10958 | Knee Lifter Connection Lever Lifting Rod with 202302 |
| 202302 | 10248 | Knee Lifter Connection Lever Lifting Rod Cotter Pin |
| 202446 | 10246 | Knee Lifter Connection Lever Pin |
| 202876 | 10958 | Lifting Lever Hinge Screw |
| 2002621 | 10248 | Screw |
| 207007 | 10951 | Knife Arm with two 2000760 |
| 207066 | 10967 | Knife Arm Base Plate with two 200061 D |
| 207067 | 10967 | Knife Arm Base Plate 207063 with 207066 and two 207065 |
| 207068 | 10967 | Knife Arm Base Plate Position Plate |
| 207011 | 10953 | Knife Arm Base Plate Position Plate Screw (2) |
| 200574E | 10949 | Knife Arm Base Plate Screw |
| 2005400 | 10949 | Knife Arm Center |
| 202622 | 10949 | Set Screw |
| 207065 | 10951 | Driving Link |
| 200061D | 10968 | Hinge Screw (lower) |
| 207006 | 10953 | Hinge Screw (upper) |
| 2009940 | 10949 | Knife Arm Driving Link Hinge Screw (lower) |
| 2009930 | 10949 | Knife Arm Driving Link Hinge Screw (upper) |
| 202887 | 10948 | Knife Bar |
| 206940 | 10949 | Cross Head |
| 207016 | 206940 with 2009936, 2009940 and 207006 | |
| 202889 | 10373 | Knife Bar Cross Head Screw (2) |
| 202890 | 10373 | Knife Bar Driving Eccentric with 2003820 and 2004370 |
| 2014640 | 10968 | Knife Bar Driving Eccentric Fork with 200382 and 2014640 |
| 2003820 | 10373 | Knife Bar Driving Eccentric Fork Position Screw |
| 2004370 | 10246 | Knife Bar Driving Eccentric Fork Set Screw |
| 2003820 | 10373 | Knife Bar Driving Eccentric Position Screw |
| 202891 | 10947 | Knife Bar Driving Shaft Crank with 200694 and 201525E |
| 200694F | 10373 | Knife Bar Driving Shaft Crank Screw Stud |
| 2015250 | 10245 | Knife Bar Driving Shaft Crank Screw Stud Nut |
| 202892 | 10373 | Knife Bar Friction Gib |
| 202893 | 10373 | Lifting Spring (spiral) |
| 202894 | 10949 | Bracket |
| 2005851 | 10373 | Screw (2) |
| 2004856 | 10373 | Knife Bar Lifting Spring Thumb Screw |
| 206949 | 10949 | Knife Bar Stop Plate (lower) Face Plate Hinge and Holder |
| 206950 | 10949 | Knife Bar Stop Plate (upper) and Face Plate Stop |
| 200582 | 10252 | Knife Bar Stop Plate Screw (4) |
| 2000760 | 10949 | Screw |
| 202898 | 10947 | Switch-out Handle with two 2003730 |
| 2003730 | 10373 | Knife Switch-out Handle Set Screw |
| 202899 | 10947 | (spiral) |
| 202900 | 10947 | Shaft |
| 202901 | 10949 | Needle Bar with 200141 |
| 202550 | Bushing | |
| 207022 | 202901 with 200086 | |
| 2000860 | 10248 | Needle Bar Connecting Stud Pinch Screw |
| 202328 | 10947 | Needle Bar Crank with 2003350, 2004280, 202333 and two 200374 |
| 203117 | Needle Bar Crank 202328 with 202329, 202331 and 202398 to 202400 | |
| 203172 | 10248 | Needle Bar Crank Friction Washer |
| 2004280 | 10248 | Position Screw |
| 2003350 | 10244 | Set Screw |
| 200141F | 10248 | Set Screw |
| 202335 | 10248 | Presser Bar (hollow) with 200074F |
| 207072 | 10249 | Bushing |
| 2003520 | 10248 | Set Screw |
| 202339 | 10249 | Lifter |
| 2006530 | 10249 | Hinge Screw |
| 202903 | 10949 | Lifting Releasing Lev-er Bracket |
| 200260D | 10249 | Presser Bar Lifting Releasing Lev-er Bracket Guide Screw |
| 202342 | 10249 | Presser Bar Lifting Releasing Lev-er Bracket Spring (spiral) |
| 202337 | 10249 | Presser Bar Position Guide |
| 202338 | 10249 | with 2000860 |
| 2000860 | 10248 | Presser Bar Position Guide Lever Pinch Screw |
| 2003520 | 10248 | Presser Bar Position Guide Set Screw |
| 202343 | 10949 | Presser Bar Spring |
| 202346 | 10249 | Stop Rod |
| 2004923 | 10249 | Thumb Screw (pres-sure regulating) |
| 202090 | 10949 | Presser Foot Hinge Pin |
| 200368 | 10668 | Set Screw |
| 206943 | Plate | |
| 202923 | Shank | |
| 206944 | 10951 | Presser Foot (hinged) complete, for trimming margins from to in., in steps of in., Nos. 202090, 202923 and 206943 |
| 200074 | 10249 | Presser Foot Screw |
| 202397 | 10668 | Take-up (auxiliary) |
| 2008425 | 10668 | Lever |
| 202398 | 10247 | Screw |
| 202399 | 10247 | Driving Stud with 202277 |
| 202277 | Take-up Lever Driving Stud Oil Packing (wick) | |
| 202400 | 10247 | Take-up Lever Hinge Stud with 202423 |
| 202423 | Take-up Lever Hinge Stud Oil Packing (wick) | |
| 2003830 | 10246 | Take-up Lever Hinge Stud Set Screw |
| 202401 | 10247 | Take-up Lever Oiling Felt |
| 200132 | 10247 | Screw |
| 202402 | 10247 | Tension Dise (back) |
| 202403 | 10247 | Screw |
| 202404 | 10247 | Release Plunger |
| 202405 | 10247 | Washer |
| 202407 | 10881 | Spring |
| 200625F | 10247 | Stud with 204925 |
| 200084 | 10968 | Set Screw |
| 204925 | 10668 | Washer |
| 2015728 | 10881 | Thumb Nut |
| 202409 | 10252 | Tension complete, Nos. 200625F, 201572в, 202102, 202403, 202405, 202407 and 202410 |
| 202410 | 10252 | Thread Controller Spring |
| 202411 | 10252 | Guide |
| 200132E | 10247 | Stop |
| 202412 | 10252 | Screw |
| 202413 | 10252 | Lever |
| 202414 | 10252 | Screw |
| 202415 | 10252 | Set Screw |
| 202979 | 10252 | Retainer Sleeve |
| 2005821 | 10252 | Spring |
| 2003551 | 10252 | Stud |
| 2003681 | 10668 | Set Screw |
| 202091 | 10252 | Retainer Sleeve |
| 202092 | 10252 | Spring |
| 204058 | 10252 | Stud |
| 2003681 | 10668 | Set Screw |
| 204059 | 10668 | Thread Retainer complete, Nos. 202091, 202092 and 204058 |
| 207017 | Throat Plate, 50 needle hole, for needle sizes 14 and 15, with 202534, 207069 and two 200582n.. | |
| 202534 | 10668 | Throat Plate Bobbin Case Stop Screw |
| 200582 | 10252 | Screw |
| 207013 | 10951 | Throat Plate Knife Cutting Plate, for trimming margins from to in., in steps of inch. |
| 207069 | 10968 | Throat Plate Knife Cutting Plate Position Pin |
| 200583 | 10668 | Throat Plate Knife Cutting Plate Screw |
| 207018 | 10956 | Throat Plate complete, 50 needle hole, for needle sizes 14 and 15, for trimming margins from to in., in steps of in., Nos. 200583, 207013 and 207017 |
| 202872 | 10668 | Throat Plate Position Pin |
| 200576日 | 10968 | Screw (2) |
Accessories
For Machine No. 61w41
| No. | Plate | Name |
|---|---|---|
| 202265 | 10964 | Bobbin Case Screw Driver Blade |
| *225482 | Handle | |
| *225483 | 12345 | Bobbin Case Screw Driver complete, Nos. 225482 and 225483 |
| 225497 | Needles, three each, sizes 12 and 14 | |
| 206945 | 12345 | Throat Plate Knife Cutting Plate, for trimming margins and inch |
| 228172 | Drip Pan with four wood screws in., No. 5 | |
| 41400 | 12345 | Machine Rest Pin (wood) |
| 36578 | 12345 | Oiler with 36579 |
| 36579 | 12345 | Spout, 34 in. long, with 120117 |
| 120117 | Washer | |
| *225484 | Screw Driver Blade | |
| *225485 | Handle | |
| 225498 | 12345 | Screw Driver complete (71 in. long), Nos. 225484 and 225485 |
| 227781 | 12345 | Wrench (steel) |
Bobbin Winder
Swing Automatic, Right Hand
| No. | Plate | Name |
|---|---|---|
| 202470 | 10271 | Bobbin Holder |
| 202471 | 10271 | Frame with 202277 and 225138 |
| 202472 | 10271 | Hinge Pin |
| 225454 | 10882 | Oil Packing (wick) |
| 225455 | 10882 | Well Cap |
| 225456 | 10882 | Spring |
| 202277 | Plunger | |
| 225438 | 10883 | Pulley with 2001050 |
| 200105 | Set Screw | |
| *225443 | Spindle | |
| 225452 | 10882 | 225443 with 225451 |
| 225444 | 10882 | Stop Latch |
| 200056E | 10882 | Screw |
| 225458 | 10882 | Thumb Lever |
| 225459 | 10882 | Hinge Stud |
| 225460 | 10882 | Joint Stud |
Knee Lifter
| No. | Plate | Name |
|---|---|---|
| 227781 | 10958 | Knee Lifter Rock Lever with 2005220 and 2005290 |
| 227782 | Knee Lifter Rock Lever 227781 with two each 202451 and 202452 | |
| 227783 | 10958 | Knee Lifter Rock Lever 227782 with 202985 and 227784 |
| 202453 | 10958 | Knee Lifter Rock Lever Knee Plate with 2005260 |
| 202985 | Knee Lifter Rock Lever Knee Plate 202453 with 202455 | |
| 202455 | 10958 | Knee Lifter Rock Lever Knee Plate Arm (short) |
| 2005220 | 10953 | Knee Lifter Rock Lever Knee Plate Arm Set Screw |
| 2005260 | 10968 | Knee Lifter Rock Lever Knee Plate Set Screw |
| 202451 | 10958 | Knee Lifter Rock Lever Lug with two wood screws 7 in., No. 13н |
| 202452 | 10953 | Knee Lifter Rock Lever Lug Hinge Pin |
| 227784 | 10958 | Knee Lifter Rock Lever Rod, 3 in. long, with 227785 |
| *227785 | Knee Lifter Rock Lever Rod Cap or Oil Guard | |
| 200529 | 10953 | Knee Lifter Rock Lever Rod Set Screw |
| (Other Knee Lifter parts are listed with parts of machine head) |
Binder and Folder
| No. | Plate | Name |
|---|---|---|
| 231310 | 10968 | Binder and Folder, in gauges 3, 11, 2, and 1 inch |
| 206954 | 10954 | Binder Base Plate |
| 207028 | 206954 with 2001610 and 206927 | |
| 206927 | 10947 | Binder Guard |
| 2001610 | 10247 | Screw |
| 200507 в | 10953 | Thumb Screw |
| 207038 | Binder and Folder on Base Plate complete, Nos. 207028, 231310 and two 200507 в | |
| 230471 | 10968 | Ribbon Reel Supporting Spindle Hub |
| 225666 | Ribbon Reel Supporting Spindle Hub 230471 with 225980 | |
| 225980 | Ribbon Reel Supporting Spindle Hub Base | |
| 225976 | Ribbon Reel (9 in, diam.) complete, Nos. 225663 and 225665 |
Ribbon Reel
| No. | Plate | Name |
|---|---|---|
| 225663 | 10955 | Ribbon Reel (9 in. diam.) with 2001610 |
| 2001610 | 10247 | Screw |
| 225664 | Ribbon Reel Supporting Spindle Base | |
| 225665 | 10956 | Ribbon Reel Supporting Spindle Base with 225664 and two wood screws in., No. 7 |
Knife Grinder
FOR MACHINE NO. 61w41
Same as for Machine No. 61w41 with the following exceptions:
| No. | Plate | Name |
|---|---|---|
| 207013 | 10951 | Throat Plate Knife Cutting Plate, for trimming margins from to in., in place of 206945 |
| 207007 | 10951 | Knife (3), in place of 206934 |
| 225180 | 12345 | Drip Pan with four wood screws in., No. 5, in place of 228172 |
| Note: Ribbon Reel No. 225976 is not an Accessory for 61w42 Machine. |
| No. | Plate | Name |
|---|---|---|
| 206977 | Emery Wheel, 2 in. diameter | |
| 206962 | 10957 | Driving Shaft |
| 2015100 | 10957 | Nut |
| 204101 | 10957 | Washer |
| 206963 | 10957 | Emery Wheel Driving Shaft Pulley with two 2004030 |
| 2004030 | 10968 | Emery Wheel Driving Shaft Pulley Set Screw |
| 206969 | Emery Wheel Washer (paper) | |
| 206964 | 10954 | Knife Grinder Frame with two 54897 |
| 54897 | 10968 | |
| 206965 | 10957 | Knife Holder Slide Bracket with 2003940, 2004570 and 200473B |
| 2004577 | 10957 | Knife Holder Slide Bracket Adjusting Screw |
| 206966 | 10957 | Knife Holder Slide Bracket Adjusting Screw Slide Plate |
| 2005771 | 10245 | Knife Holder Slide Bracket Adjusting Screw Slide Plate Screw |
| 2003940 | 10957 | Knife Holder Slide Bracket Set Screw |
| 206967 | 10957 | Knife Holder Slide Bracket Shaft Set Screw |
| 206968 | Knife Grinder complete, Nos. 200577н, 201510D, 204101, 206962 to 206967, 206977 and two 206969 |
Throat Plates
FOR MACHINE NO. 61w41
| No. | Plate | Name |
|---|---|---|
| 206957 | Throat Plate, 50 needle hole, for needle sizes 14 and 15, with 202534 and two 200582 | |
| 206956 | 10956 | Throat Plate Knife Cutting Plate, for trimming margins from to in., in steps of 2 inch |
| 206958 | 10956 | Throat Plate complete, 50 needle hole, for needle sizes 14 and 15, for trimming margins from to va in., in steps of in., Nos. 206956, 206957 and two 2001451 |
| 206960 | 10956 | Throat Plate, 50 needle hole, for needle sizes 14 and 15, with 202534 and two 200582 |
FOR MACHINE NO. 61w42
| No. | Plate | Name |
|---|---|---|
| 206959 | Throat Plate Knife Cutting Plate, for trimming margins A and inch | |
| 206961 | 10956 | Throat Plate complete, 50 needle hole, for needle sizes 14 and 15, for trimming margins and in., Nos. 206959, 206960 and two 200145 п |
| 206972 | Throat Plate, 50 needle hole, for needle sizes 14 and 15, with 202534 and two 2005821 | |
| 206971 | Throat Plate Knife Cutting Plate, for trimming margins and inch | |
| 207026 | 10960 Throat Plate complete, 50 needle hole, for needle sizes 14 and 15, for trimming margins and in., for binding, Nos. 206971, 206972 and two 200145日 | |
| 207020 | Throat Plate, 53 needle hole, for needle sizes 12 and 13, with 202534 and two 200582 | |
| 207019 | 10960 | Throat Plate, Knife Cutting Plate, for trimming margins, and inch |
| 207021 | 10960 | Threat Plate, complete, 53 needle hole, for needle sizes 12 and 13, for trimming margins, and in., Nos. 207019, 207020 and two 200145 п |
Feed Dogs
FOR MACHINE NO. 61w42
| No. | Plate | Name |
|---|---|---|
| 207025 | 10968 | Feed Dog, for coarse work, for BHTH18 |
Obsolete Parts
| No. | Plate | Name |
|---|---|---|
| 206935 | 10955 | Knife Arm with two each 2000760 and 2003681, for Machine No. 61w41 |
| 207008 | 10955 | Knife Arm with two each 2000760 and 2003681, for Machine No. 61w42 |
| 207042 | 10968 | Knife Arm with 207045, two each 2000760 and 2003680, for 207044. |
| 207039 | 10955 | Knife Arm with 207045, two each 2000760 and 200368n, for 207041 |
| 206936 | 10955 | Knife Arm Base Plate, for Machine No. 61w41 |
| 207009 | 10955 | Knife Arm Base Plate, for Machine No. 61w42 |
| 207040 | 10955 | Knife Arm Base Plate, with two each 2004130 and 201529H, for 207041 |
| 207041 | Knife Arm Base Plate 207040 with 207039, for Machine No. 61w41 | |
| 207043 | 10955 | Knife Arm Base Plate, with two each 2004130 and 2015291, for 207044 |
| 206937 | 10954 | Knife Arm Base Plate 207043 with 207042, for Machine No. 61w42 |
| 207045 | 10951 | Knife Arm Hinge Pin |
| 207044 | Screw Center Bearing | |
| 202470 | 10271 | Bobbin Winder Base |
| 202471 | 10271 | Lever |
| 202472 | 10271 | Frame |
| 202474 | 10271 | Spring |
| 202475 | 10272 | Spindle |
| 202477 | 10272 | Stop Latch |
| 202479 | 10271 | Bobbin Winder complete, Nos. 200056г, 2001610, 2002210, 2015371, 202470 to 202475, 202477, 202478, three 200299 and two round head wood screws 1 in., No. 13 |
| 202480 | 10271 | Bobbin Winder Spool Holder Base with 200355 and 202484 |
| 202481 | 10271 | Bobbin Winder Spool Holder Base Spool Pin |
| 202482 | 10272 | Bobbin Winder Spool Holder Tension Dise (lower or upper) |
| 202483 | 10272 | Bobbin Winder Spool Holder Tension Dise Spring (brass) |
| 202484 | 10272 | Bobbin Winder Spool Holder Tension Dise Thread Guide |
| 202485 | 10271 | Bobbin Winder Spool Holder complete, Nos. 200011E, 202480, 202481, 202483, two 202482 and one wood screw 1 in., No. 13n |
Plate Diagrams
The following sections list parts shown in specific plates, providing a textual representation of the diagrams.
PLATE 10244 FULL SIZE
| Part Number |
|---|
| 202323 |
| 202324 |
| 200338 |
| 202253 |
| 200327 |
| 200602 |
| 202140 |
| 200335 |
| 200278 |
| 202252 |
| 202443 |
| 200328 |
| 202248 |
| 200357 |
| 202595 |
| 200054 |
| 202446 |
| 200043 |
| 200437 |
| 200383 |
| 202307 |
| 200502 |
| 202301 |
| 202300 |
| 200607 |
| 201522 |
| 200429 |
PLATE 10246 FULL SIZE
| Part Number |
|---|
| 200641 |
| 202301 |
| 202300 |
| 200607 |
| 201522 |
| 200429 |
| 202595 |
| 200054 |
| 202446 |
| 200043 |
| 200437 |
| 200383 |
| 202307 |
| 200502 |
PLATE 10247-FULL SIZE
| Part Number |
|---|
| 202398 |
| 201572 |
| 200161 |
| 200132 |
| 202401 |
| 202403 |
| 202402 |
| 200625 |
| 200081 |
| 202399 |
| 202400 |
| 202404 |
| 202405 |
| 202407 |
| 202326 |
| 202333 |
| 202329 |
| 202331 |
| 200352 |
| 200363 |
PLATE 10248-FULL SIZE
| Part Number |
|---|
| 200224 |
| 200428 |
| 200335 |
| 200262 |
| 200141 |
| 200086 |
| 202302 |
| 203172 |
| 202326 |
| 202333 |
| 202329 |
| 202331 |
| 200352 |
| 200363 |
PLATE 10249-FULL SIZE
| Part Number |
|---|
| 202337 |
| 200492- |
| 200260 |
| 202346 |
| 200347 |
| 202339 |
| 200653 |
| 207072 |
| 202342 |
| 200074 |
| 200653 |
| 202339 |
| 207072 |
| 202342 |
PLATE 10252-FULL SIZE
| Part Number |
|---|
| 202411 |
| 202409 |
| 202979 |
| 202412 |
| 202413 |
| 202414 |
| 200389 |
| 202410 |
| 202417 |
| 204058 |
| 200582 |
| 202415 |
| 200355 |
| 202091 |
| 200366 |
| 202092 |
PLATE 10271-ONE-HALF SIZE
| Part Number |
|---|
| 202480 |
| 202472 |
| 202481 |
| 202471 |
| 202479 |
| 202474 |
| 202470 |
| 202473 |
| 202485 |
| 202484 |
| 200392 |
| 200387 |
| 200290 |
PLATE 10272-FULL SIZE
| Part Number |
|---|
| 200221 |
| 200011 |
| 200056 |
| 200299 |
| 200380 |
| 201537 |
| 200161 |
| 200355 |
| 202483 |
| 202482 |
| 202477 |
| 202478 |
| 202475 |
| 202484 |
| 200392 |
| 200387 |
| 200290 |
PLATE 10373-FULL SIZE
| Part Number |
|---|
| 202890 |
| 200442 |
| 200382 |
| 200378 |
| 200368 |
| 200373 |
| 200437 |
| 202899 |
| 202889 |
| 202893 |
| 202900 |
| 200694 |
| 200485 |
| 201525 |
| 200585 |
| 202892 |
| 200352 |
| 202894 |
| 202619 |
| 202355 |
| 202872 |
| 202036 |
| 204925 |
| 204059 |
| 204235 |
| 202534 |
| 202397 |
| 210554 |
| 202332 |
PLATE 10668-FULL SIZE
| Part Number |
|---|
| 200475 |
| 200575 |
| 200374 |
| 200583 |
| 200378 |
| 200368 |
| 200079 |
| 200842 |
| 202619 |
| 202355 |
| 202872 |
| 202036 |
| 204925 |
| 204059 |
| 204235 |
| 202534 |
| 202397 |
| 210554 |
| 202332 |
PLATE 10881-FULL SIZE
| Part Number |
|---|
| 225461 |
| 200082 |
| 202104 |
| 2102 |
| 202407 |
| 201499 |
| 201572 |
| 225462 |
PLATE 10882-FULL SIZE
| Part Number |
|---|
| 225453 |
| 225455 |
| 225438 |
| 200380 |
| 200056 |
| 225454 |
| 225452 |
| 200299 |
| 225456 |
| 202478 |
| 225444 |
| 225459 |
| 225460 |
| 200388 |
| 225458 |
PLATE 10883 ONE-FOURTH SIZE
| Part Number |
|---|
| 225433 |
| 202473 |
| 225436 |
PLATE 10947-ONE-HALF SIZE
| Part Number |
|---|
| 202891 |
| 206951 |
| 202898 |
| 207070 |
| 210616 |
| 206928 |
| 206927 |
| 206925 |
| 202245 |
| 202328 |
| 203090 |
| 204296 |
| 202243 |
| 203089 |
PLATE 10948-ONE-HALF SIZE
| Part Number |
|---|
| 202306 |
| 202297 |
| 202887 |
| 202335 |
| 202255 |
PLATE 10949-FULL SIZE
| Part Number |
|---|
| 200540 |
| 200994 |
| 200182 |
| 200574 |
| 200898 |
| 200917 |
| 202622 |
| 206940 |
| 202343 |
| 202901 |
| 202625 |
| 202894 |
| 206950 |
| 202903 |
| 202090 |
| 200155 |
| 200993 |
| 200092 |
| 206949 |
| 200540 |
| 200994 |
| 200182 |
| 200574 |
| 200898 |
| 200917 |
| 202622 |
| 206940 |
| 202343 |
| 202901 |
| 202625 |
| 202894 |
| 206950 |
| 202903 |
| 202090 |
| 200155 |
| 200993 |
| 200092 |
| 206949 |
PLATE 10951-FULL SIZE
| Part Number |
|---|
| 206941 |
| 206944 |
| 206946 |
| 200281 |
| 207065 |
| 206934 |
| 225647 |
| 207012 |
| 230251 |
| 206939 |
| 200157 |
| 226015 |
| 207007 |
| 225959 |
| 207045 |
| 206930 |
| 207011 |
| 206929 |
| 200529 |
| 200507 |
| 200522 |
| 202452 |
PLATE 10953-FULL SIZE
| Part Number |
|---|
| 200748 |
| 207005 |
| 225585 |
| 207006 |
| 202756 |
| 201582 |
| 206930 |
| 207011 |
| 206929 |
| 200529 |
| 200507 |
| 200522 |
| 202452 |
PLATE 10954 ONE-HALF SIZE
| Part Number |
|---|
| 203091 |
| 206937 |
| 207004 |
| 206952 |
| 207003 |
| 206954 |
| 206935 |
| 207039 |
| 206923 |
| 207008 |
| 207042 |
| 206936 |
| 207040 |
| 207009 |
| 207043 |
| 207001 |
| 206933 |
PLATE 10955-ONE-FOURTH SIZE
| Part Number |
|---|
| 202530 |
| 225663 |
| 206935 |
| 207039 |
| 206923 |
| 207008 |
| 207042 |
| 206936 |
| 207040 |
| 207009 |
| 207043 |
| 207001 |
| 206933 |
PLATE 10956-FULL SIZE
| Part Number |
|---|
| 206958 |
| 206961 |
| 207018 |
| 225665 |
PLATE 10957-ONE-HALF SIZE
| Part Number |
|---|
| 200457 |
| 200473 |
| 200394 |
| 200387 |
| 206965 |
| 206966 |
| 206967 |
| 206962 |
| 206964 |
| 207026 |
| 201510 |
| 204101 |
| 206963 |
PLATE 10958-ONE-FOURTH SIZE
| Part Number |
|---|
| 202451 |
| 227783 |
| 202455 |
| 227781 |
| 227784 |
| 202453 |
| 202445 |
PLATE 10960-FULL SIZE
| Part Number |
|---|
| 206973 |
| 207021 |
PLATE 10964-FULL SIZE
| Part Number |
|---|
| 200596 |
| 200594 |
| 200984 |
| 202265 |
| 207064 |
| 207062 |
| 200145 |
| 202064 |
| 202533 |
| 206777 |
| 202270 |
| 202716 |
| 202267 |
| 202269 |
| 202056 |
| 206852 |
| 200614 |
| 207066 |
| 207063 |
| 207068 |
| 207067 |
PLATE 10967-ONE-FOURTH SIZE
| Part Number |
|---|
| 200457 |
| 200394 |
| 200387 |
| 206965 |
| 206966 |
| 206967 |
| 206962 |
| 206964 |
| 207026 |
| 201510 |
| 204101 |
| 206963 |
PLATE 10968-FULL SIZE
| Part Number |
|---|
| 230471 |
| 200413 |
| 200526 |
| 200466 |
| 200061 |
| 200403 |
| 200576 |
| 201018 |
| 201464 |
| 200084 |
| 206775 |
| 207069 |
| 201529 |
| 205520 |
| 54897 |
| 207025 |
| 207073 |
| 206751 |
| 231310 |
PLATE 12345-ONE-HALF SIZE
| Part Number |
|---|
| 41400 |
| 225497 |
| 225498 |
| 202258 |
| 36578 |
| 225554 |
| 36579 |
