Shokz OpenMove S661
User Guide
How It Works
This section details the fundamental operations and features of your Shokz OpenMove headphones.
Headphone Controls
ON/OFF
Turn on the headphones: Press and hold the
until the LED Indicator flashes blue. Audrey will say: "Welcome to Shokz".Turn off the headphones: Press and hold the
until the LED Indicator flashes red. Audrey will say: "Power off".Pairing
1. Start with OpenMove turned off.
2. Press and hold the
until the LED Indicator flashes red and blue alternately.3. Open your device's Bluetooth settings and select "OpenMove by Shokz." Audrey will say "connected."
How to Wear
Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!
Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.
Volume
Operate volume controls while audio is playing.
How to change volume: While your audio is playing, adjust headphone volume by pressing either the
or buttons.*A "beep" will sound when the volume is at its max.
Listening with headphones at high volume may affect your hearing and the audio will be distorted.
Multifunction Button
The Multifunction Button on the left earcup controls various playback and call functions:
- Play/pause music: Click once
- Next song: Double-click while music is playing
- Previous song: Triple-click while music is playing
- Answer call: Click once
- End call: Click once during a call
- Answer call waiting and end current call: Press and hold for 2 seconds when receiving a second call
- Ignore a call: Press and hold for 2 seconds during an incoming call
- Activate voice assistant: Press and hold for 2 seconds when device is on standby
- Redial last number: Double-click on standby
*Functions related to phone calls are not applicable to online calls.
Check Battery Status
Operate controls while audio is not playing.
How to check battery status: Click the
or button while music is paused. Audrey will tell you the battery status: "Battery high/Battery medium/Battery low/Charge me".Extra Features
EQ Modes
Your headphones offer different audio profiles:
- Standard Mode: Balanced frequency for listening to music. (Icon: Ear with sound waves)
- Vocal Booster Mode: Enhanced intermediate frequencies for audiobooks, podcasts, etc. (Icon: Stylized mouth with sound waves)
Switching EQ Modes
Operate controls while music is playing.
How to switch EQ mode: Press and hold both buttons (
and ) while music is playing until you hear a beep. Audrey will say: "Standard Mode/Vocal Booster Mode."Multipoint Pairing
Pair Two Devices: Switch between two devices seamlessly with multipoint pairing.
1. Start with your headphones powered off.
2. Press and hold
until Audrey says "pairing" and the LED indicator flashes red and blue alternately.3. Press and hold the
and until Audrey says "multipoint enabled."4. Open first device's Bluetooth® menu and select "OpenMove by Shokz." Audrey will say "connected."
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding
until Audrey says "pairing" and the LED indicator flashes red and blue alternately.7. Open second device's Bluetooth® menu and select "OpenMove by Shokz." Audrey will say "connected."
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices.
Turn Multipoint Pairing Off
Operate controls with headphones powered off.
1. Start with your headphones powered off.
2. Press and hold
until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.3. Press and hold the
and until Audrey will say "multipoint disabled."Restore Factory Settings
Operate controls with headphones powered off.
1. Start with your headphones powered off.
2. Press and hold
until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.3. Press and hold the
, , and until you hear two beeps and feel the vibration.4. Turn your headphones off. OpenMove is now reset and can be re-paired to your device.
Changing Languages
Your headphones have four built-in languages: Chinese, English, Japanese and Korean.
Follow the instruction when headphones powered off.
1. Start with your headphones powered off.
2. Press and hold
until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.3. Double-press the
. Languages have been switched when you hear the corresponding language.Care and Maintenance
Charging Tips
The headset will automatically shut down when charging.
When the headphones are at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding USB-C cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Storage and Maintenance
- Store the headphones in a cool, dry place. The working temperature should be 0~45°C (32~113°F). Working in a cold/hot temperature, highly humid area, or low air pressure environment may reduce battery life.
- Keep the product away from heat sources, direct sunlight, combustible gas, or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
- These headphones are water-resistant, but are not waterproof. Please do not submerge the headphones in water.
- Clean the headphones with a soft dry cloth.
- Do not charge right after exercising, in case there's sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using again.
Warranty
Your headphones are covered by a warranty. Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty.
*Failure to register will not affect your limited warranty rights.
Troubleshooting
If you have any trouble or problems, please visit https://shokz.com/pages/faq for more support!
What's in the Box
The following items are included with your Shokz OpenMove headphones:
- OpenMove Box * 1
- OpenMove headphone * 1
- OpenMove Package * 1
- USB-C Cable * 1
- OpenMove User Guide * 1
- OpenMove Legal Statement * 1
If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending on the sales region.
Regulatory and Legal Information
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
Responsible Party (for FCC matters only)
AfterShokz LLC.
3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758 USA
https://shokz.com
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CE Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands.
Frequency Range | Max. Transmit Power |
2400-2483.5MHz | 1dBm(EIRP) |
UK Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and all other applicable United Kingdom's regulations. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's authorised representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.
WEEE Declaration of Conformity
This WEEE logo means that this product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.