Philips STE3180 Garment Steamer

About This Document

This document provides instructions for the Philips STE3180 Garment Steamer. Please read all instructions carefully before use.

Product Model: STE3180

Brand: Philips

Safety Precautions

Important Safety Instructions:

• Do not use the appliance on hands. ❌
• Do not use the appliance on the face or body. ❌
• Do not use the appliance on clothes while they are being worn. ❌
• Do not use the appliance on clothes on a hanger without proper support. ❌
• Do not use the appliance on clothes while someone is wearing them. ❌
• Avoid prolonged steaming of the same spot for more than 5 minutes. ❌

Water Usage Guidelines:

The appliance is suitable for use with tap water. However, if you live in an area with hard water, it is recommended to mix an equal amount of tap water with distilled or demineralized water. This will prevent rapid scale build-up and prolong the appliance's lifetime.

Warning: Do not use perfumed water, water from tumble dryers, vinegar, starch, descaling agents, ironing aids, chemically descaled water, or other chemicals. These substances may cause water spitting, brown staining, or damage to the appliance.

Product Overview and Assembly

The Philips STE3180 Garment Steamer is designed for efficient garment care. It consists of a water tank, a steam generator base, a steam hose, and a steam head.

Assembly Steps: Follow the numbered steps provided in the diagrams to assemble the garment steamer. This typically involves attaching the pole, hanging the steam head, and connecting the steam hose. ?

Operation

Filling the Water Tank:

1. Ensure the appliance is unplugged.

2. Open the water tank lid.

3. Fill the water tank with the recommended water type (tap water or a mix for hard water areas). ?

4. Close the lid securely.

Using the Steamer:

1. Plug in the appliance. ?

2. Turn the dial to select the desired steam setting.

3. Wait for the appliance to heat up. The indicator light will show when it is ready.

4. Hold the steam head and direct the steam onto your garment. Move the steam head up and down the fabric to remove wrinkles.

5. Use the included heat-resistant glove ? for protection when steaming.

Steaming Garments:

Hang your garment on a hanger. Move the steam head over the fabric, applying steam to remove wrinkles. For best results, steam from top to bottom.

Auto-Off Function

The appliance features an auto-off function for safety and energy saving.

• The appliance will enter auto-off mode (LED light will blink) when the water tank is empty or when the steam hose is bent. ? blinking
• It switches off automatically after 10 minutes if the water tank is not refilled or the steam hose is not straightened. ⏳ 10 min ?OFF

Cleaning and Maintenance

Regular cleaning and descaling will ensure optimal performance and longevity of your steamer.

Cleaning the Steam Head:

Periodically clean the steam head to remove any mineral deposits. Follow the illustrated steps. ?

Descaling:

It is recommended to descale the appliance every 1-3 months, depending on water hardness and usage frequency. Follow the illustrated steps for descaling. ?

Emptying the Water Tank:

After each use, empty any remaining water from the tank to prevent mineral build-up.

Support and Warranty

If you have any problems with your Philips garment steamer, please visit:

www.philips.com/support ?

This website provides a list of frequently asked questions (FAQs) and other support resources. You can also contact the Philips Consumer Care Center in your country. ❓