Sandberg Power Station AC 200

Overview

The Sandberg Power Station AC 200 is a versatile portable power solution. The device features several ports and controls:

• 1. Power button ?
• 2. Digital Display Screen ?️
• 3. AC Power button ⚡
• 4. USB 1 Output ?
• 5. DC 1 Output ⚡
• 6. USB QC3.0 Output ?
• 7. USB-C Input/Output ?
• 8. USB 2 Output ?
• 9. DC 2 Output ⚡
• 10. AC Output ⚡
• 11. Cooling fan ?
• 12. DC Input ⚡
• 13. LED light button ?
• 14. Lamp ?

For assistance, visit helpdesk.sandberg.world.

Detailed Specifications

AC Output: EU wall socket: 230V AC, 50 Hz (200W max)

USB-A Outputs:

• USB 1 Output: 5V/2.1A
• USB 2 Output: 5V/2.1A
• USB QC3.0 Output: 5V/3A, 9V/2A, 12V/1.5A (18W max)

USB-C PD Input/Output: 5V/2.4A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W max)

DC Outputs:

• DC port (5521) Output: 12V/10A (120W max) (x2)

DC Input:

• DC port (5521) Input: 5V-20V/2A (40W max)

Battery Capacity: 14.4V/12Ah/172.8Wh (equivalent to 3.6V/48000 mAh)

Operation and Charging

Device Power

To turn the device on or off: Press and hold the power button ? for 5 seconds.

DC Output Control

To turn the DC Output on or off: Press the power button ?. The display screen ?️ will show the current battery capacity (e.g., 98%) and output status.

AC Output Control

To turn the AC Output on or off: Press and hold the AC power button ⚡ for 5 seconds. The display screen ?️ will indicate the AC output status.

Charging the Power Station

The power station can be charged using the following methods:

• DC/PD Input: Using a compatible DC charger or solar panel charger connected to the DC port (5521) Input (5V-20V/2A, 40W max).
• USB-C PD Input: Using a USB-C Power Delivery charger (up to 100W max).
• Wall Charger: (Implied via DC/PD input, using a standard wall adapter if compatible).

Charging Mobile Devices

Connect your mobile devices (smartphones, tablets, etc.) to the USB 2 Output, USB QC3.0 Output, or USB-C Output using their respective charging cables. Example: Connect a smartphone to the USB-C port ? for charging.

Charging Equipment via AC Output

To power larger equipment (e.g., laptops, small appliances) using the AC output:

1. Ensure the power station is turned on by pressing and holding the power button ? for 5 seconds.
2. Activate the AC output by pressing and holding the AC power button ⚡ for 5 seconds.
3. Connect your equipment to the AC EU wall socket ⚡.

Using the Lamp

The integrated LED lamp ? can be controlled as follows:

1. Turn on the power station by pressing and holding the power button ? for 5 seconds.
2. Press and hold the LED light button ? for 5 seconds to activate the lamp.
3. Press the LED light button ? once more to cycle through different light modes or turn it off. Subsequent presses will cycle through available settings.

Support and Warranty

For support and troubleshooting, please visit the Sandberg helpdesk at http://helpdesk.sandberg.world.

Sandberg offers a five-year warranty on this product. To register your new Sandberg product and review the warranty terms, please visit www.sandberg.world/warranty.

For information on handling electronic waste, please see www.sandberg.world/weee.

Manufacturer: Sandberg A/S

Address: Bregneroedvej 133D, 3460 Birkeroed, Denmark

Made in: China