Sandberg All-in-1 Laptop Powerbank 24000 Quick Guide

Overview

The Sandberg All-in-1 Laptop Powerbank 24000 is depicted from an isometric view. Key features and ports are labeled:

• Wireless charging area: Supports up to 10W.
• USB-C Output 2: Provides 18W Power Delivery (PD).
• USB-A Output: Delivers up to 22.5W.
• USB-C Input / Output: Supports up to 60W PD for input and output.
• DC Input / Output: Supports input up to 48W and output up to 84W.
• LED Display: Shows the current voltage or status.

Detailed Specifications

The power bank offers versatile connectivity and power specifications:

• USB-C2 Port: Output: 5V/3A, 9V/3A, 12V/2.25A. Supports Programmable Power Supply (PPS) with 3.3V-11V/3A.
• Button/Power Indicator: A circular button used for power on/off and checking battery status.
• DC Input/Output Port: Input: 12-24V/2A. Output: 12V/4A, 16.5V/4A, 20V/4A, 24V/3.5A.
• LED Display: Shows the selected output voltage, for example, "24V".
• USB-C1 Port (Input & Output): Supports input and output with specifications: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A.
• USB-A Output Port: Output: 4.5V/5A, 5V/4.5A, 9V/2A, 12V/1.5A.

How to Charge the Power Bank

The power bank can be recharged using the following methods:

USB-C Input (PD)

Connect a USB-C Power Delivery (PD) charger to the designated USB-C Input/Output port.

DC Input

Utilize the DC Input/Output port for charging. This port accepts input voltages from 12V to 24V at 2A.

Compatible Charging Sources for DC Input:

• Solar Panel Charger
• Car Charger
• Wall Charger

Power Indicator Button

Press the power button briefly to view the current battery charge level indicated by LEDs:

• 1 LED illuminated: 25% battery remaining.
• 2 LEDs illuminated: 50% battery remaining.
• 3 LEDs illuminated: 75% battery remaining.
• 4 LEDs illuminated: 100% battery remaining.

The LED status display is active for 5 seconds after a short press of the button.

Charging a Laptop with DC Cable - Important Note

To charge a laptop using the DC output port:

1. Select the appropriate tip that fits your laptop's DC power port.
2. Set the correct output voltage on the power bank:
   • Press and hold the power button until the display begins flashing to enter voltage selection mode.
   • Briefly click the button to cycle through the available voltages: 12V, 16.5V, 20V, 24V.
3. Connect the laptop to the power bank using the DC cable; charging will automatically start.
4. After disconnecting the laptop, the voltage setting will reset. The power bank will default to the lowest setting (12V) for safety at the beginning of the next charging cycle.

Important Note: If you are uncertain about the correct DC voltage for your laptop, consult the label on your laptop's original AC charger.

Wireless Charger

To utilize the wireless charging functionality:

1. Activate the power bank by pressing the power button briefly.
2. Initially, a blue status LED will illuminate for 5 seconds.
3. Subsequently, a green LED will light up, indicating that the wireless charging feature is ready.
4. The LED will turn blue to confirm that charging is in progress correctly.
5. Place your mobile phone onto the surface of the power bank to initiate wireless charging.

Support and Warranty

For assistance and support, please visit the Sandberg helpdesk at http://helpdesk.sandberg.world.

Warranty Information: Your Sandberg product is covered by a five-year warranty. For detailed warranty terms and to register your product, please visit www.sandberg.world/warranty.

Product Specifications Summary:

Regulatory Compliance: The product bears UKCA, FCC, and CE markings, indicating compliance with relevant standards.

For guidance on the proper handling and disposal of electronic waste, please visit www.sandberg.world/weee. Please recycle responsibly [recycle-symbol].