Introduction to the ROBB smarrt ZigBee Micro Smart Dimmer
The ROBB smarrt ZigBee Micro Smart Dimmer is an advanced lighting control device designed for seamless integration into smart home ecosystems. Utilizing the ZigBee 3.0 protocol, this dimmer offers reliable wireless communication for controlling the on/off status and brightness of connected lights.
This guide provides essential information for installation, operation, and network pairing. It details the device's specifications, compatible load types, and various methods for connecting and controlling it within a ZigBee network, including direct pairing with remotes and integration with coordinators or hubs.
Key Features and Specifications
- Protocol: ZigBee 3.0
- Input/Output Voltage: 100-240VAC
- Maximum Load: Up to 400W (depending on load type and voltage)
- Connectivity: Screw terminals for safe and reliable connections
- Installation: Compact size suitable for standard wall boxes
- Compatibility: Works with various load types including dimmable LEDs, incandescent, and halogen lamps. Supports both leading-edge and trailing-edge dimming modes.
- Advanced Functions: Minimum dimming level setting, soft start, active power and energy metering.
- Pairing: Supports Touchlink commissioning for direct pairing with remotes without a coordinator, and can join existing ZigBee networks.
Installation and Safety
Important: Always read all instructions prior to installation. Ensure power is disconnected before working on the device. The dimmer can be installed in a two-wire (no neutral) or three-wire (with neutral) configuration. A bypass unit may be required for certain LED or low-power loads to prevent flickering.
For detailed wiring diagrams and connection instructions, please refer to the specific sections within this manual.
ZigBee Network Integration
The ROBB smarrt ZigBee Micro Smart Dimmer can be added to a ZigBee network via a compatible coordinator or hub. It also supports self-forming a ZigBee network without a coordinator, allowing other devices to be added. The device supports 'Find and Bind' mode for easy pairing with ZigBee remotes.
For more information on ZigBee technology and compatible systems, visit Zigbee Alliance.
