Poly VVX EM50 Expansion Module

Package Contents

The package includes the Poly VVX EM50 Expansion Module, a base stand, and a screw. An optional wall mount bracket is available separately.

Optional Accessories

For more information on optional accessories, such as the Wall Mount Bracket (2200-48893-001), contact your reseller.

Connect the Base Stand

The expansion module can be placed on a desk using the included base stand. The base stand attaches to the back of the module.

Mount the Expansion Module (Optional)

The expansion module can be mounted on a wall. This involves measuring 88 mm (3.46 inches) for mounting holes, drilling holes of 5mm (3/16") diameter, and using screws to attach the bracket to the wall. The module then attaches to the bracket.

Diagram Description:

The diagram shows a ruler indicating 88 mm / 3.46 inches with two circles representing mounting points. Step 2 shows a drill creating holes in a wall. Step 3 shows a mounting bracket being attached to the wall with screws. Step 4 shows the expansion module being attached to the mounted bracket.

Connect the Expansion Module

Important: Power off the phone before connecting the expansion module.

The expansion module connects to the side of the Poly VVX 450 Business IP Phone. The connection is made via a proprietary connector and secured with a screw.

Diagram Description:

The diagram shows the back of the VVX 450 phone and the expansion module. Arrows indicate how the expansion module slides into place on the phone. Another diagram shows a screw being inserted and tightened to secure the connection between the two units.

Connect a Second Expansion Module

Important: Power off the phone before connecting an additional expansion module.

Note: You can connect up to two VVX EM50 expansion modules to a VVX 450 business IP phone.

The process for connecting a second expansion module is similar to the first, involving sliding the module into place and securing it with a screw.

Diagram Description:

The diagram illustrates connecting a second expansion module to the first one, showing the connection points and the use of a screw for securing.

End User License Agreement (EULA) and Warranty

By using this product, you agree to the terms of the End User License Agreement (EULA) found at http://documents.polycom.com/indexes/licenses. If you do not agree, return the product to the seller. Polycom's Limited Warranty terms are available at http://supportdocs.polycom.com/PolycomService/support/global/documents/support/others/plcm_warranty_summary.pdf.

Safety and Regulatory Information

This equipment complies with FCC Rules Part 15 as a Class B digital device, designed to provide reasonable protection against harmful interference. If interference occurs, measures like reorienting the antenna, increasing separation, or connecting to a different circuit may help.

Responsible Party: Polycom, Inc., 6001 America Center Drive, San Jose, CA 95002, USA, TypeApproval@poly.com.

The VVX EM50 is CE marked, indicating compliance with LVD and EMC Directives 2014/35/EC and 2014/30/EC. A Declaration of Conformity is available from Polycom (NL) BV.

Modifications not expressly approved by Polycom, Inc. may void the user's authority to operate the equipment.

Operating Ambient Conditions:

• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 95%, non-condensing
• Storage temperature: -40 to +160°F (-40 to +70°C)

Installation must comply with all relevant national wiring rules.

When using Power over Ethernet (PoE), connect only to PoE networks without outside plant connections.

This Class B digital apparatus complies with Canadian ICES-003.

To avoid electric shock, do not connect SELV circuits to TNV circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Use caution when connecting cables. The product is rated 5Vdc, 3A. All PoE sources must meet Limited Power Source requirements of IEC 60950-1.

Restriction of Hazardous Substances Directive (RoHS): Polycom products comply with EU RoHS Directive 2011/65 EU. Contact TypeApproval@poly.com for exemption details.

Regulatory Notice: https://support.polycom.com/content/dam/polycom-support/prod-ucts/voice/business-ip-phones/other-documents/en/vvx-ip-regulatory-notice.pdf

EU WEEE - End of Life products: Polycom encourages environmentally considerate recycling. Products marked with the crossed wheelie bin symbol should not be disposed of in household waste. See http://www.polycom.com/WEEE for details.

Australia: Warning—This equipment will be inoperable when mains power fails.

Japan: この装置は、クラスB機器です。この装置は、住宅環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。VCCI — B

Contact Information

Please contact your Polycom Authorized Reseller for assistance.

© 2019 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners.

Poly (formerly Plantronics and Polycom)

345 Encinal Street, Santa Cruz, California 95060

http://www.polycom.com