Middle Rabbit S-W5 Wireless Earbuds

1. Remove Protective Film

For initial use, remove the protective film from the earbud contact points. Afterward, return the earbuds to the charging case, close the lid, and open it again to turn on the earbuds.

[Illustration: Earbuds in charging case, with an arrow indicating removal of a small film from an earbud's contact point.]

2. Dongle Pairing

• Insert the USB-C dongle into the USB-C port of your device. The earbuds will automatically pair with the dongle. [Illustration: USB-C dongle being inserted into a device's USB-C port.]
• Ensure the earbuds are in dongle mode: press and hold the touch area of either earbud for 2 seconds. [Illustration: Earbud with finger pressing the touch area.]
• In your device's sound settings, ensure both input and output are set to "SW5 Dongle". [Illustration: Device sound settings menu with "SW5 Dongle" selected for input and output.]

3. Bluetooth Pairing

• Connect the earbuds to a second device via Bluetooth. In the device's Bluetooth settings, select "SW5". [Illustration: Smartphone with Bluetooth icon, showing "SW5" selected in settings.]
• Switch the earbuds to Bluetooth mode: press and hold the touch area of either earbud for 2 seconds.

4. Dual Connection

• The earbuds can connect to two devices simultaneously (via dongle and Bluetooth).
• Press and hold the touch area of either earbud for 2 seconds to switch between devices. [Icon: Finger pressing touch area.]
• When a call is received on your phone (connected via Bluetooth), the earbuds will automatically switch to the phone and return to the previous device after the call ends.
• The earbuds will remember the last mode used when they are powered on again.

[Illustration: Diagram showing simultaneous connection to a PC via dongle and a smartphone via Bluetooth.]

5. Touch Controls

Touch controls can be customized in the Middle Rabbit APP.

• Call Control: Tap 1-4 times as indicated.
• Music Control: Tap 1-4 times as indicated.
• Mic off/On switch: Press and hold for 2 seconds. [Icon: Microphone.]
• Mode Switching: Press and hold for 2 seconds. [Icon: Gear/Settings.]

Control Actions:

• Single Tap: Play/Pause music ▶️⏸️, Answer/End call ?.
• Double Tap: Next track ⏭️, Reject call ?.
• Triple Tap: Previous track ⏮️.
• Press and hold 2s: Switch modes (EQ/Bluetooth/Dongle), Mute/Unmute microphone ?.
• Press and hold 4s: Activate voice assistant ?.

[Illustration: Diagram of earbud touch surface with icons and corresponding actions.]

6. Charging

• For charging the case, use the provided charging cable and connect it to a wall outlet. [Icon: Wall outlet.]
• Do not charge via USB ports on computers or laptops, as the voltage may be insufficient. [Icon: Computer USB port with a warning symbol ⚠️.]

[Illustration: Charging case connected to a wall adapter via USB-C cable.]

7. Reset

• Place both earbuds back into the charging case.
• Keep the lid open.
• Press and hold the button on the back of the charging case for 5 seconds until the case's light flashes three times. [Illustration: Finger pressing button on the back of the open charging case; case light flashing.]

8. LED Light Guide

Earbud Status:

• Solid Light: Connected ✔️
• Slow blinking: Connecting...
• Fast blinking: Disconnected / Entered Bluetooth mode
• When earbuds are fully charged, the light will turn off.

Case Battery Level Indicators (lid open):

• <30%: Red light ?
• 30-60%: Yellow light ?
• >60%: Green light ?

[Illustration: Diagrams showing earbud LED patterns and case LED battery indicators.]

9. EQ Modes

Modes:

• Music Mode: Balanced bass, mid, and treble frequencies for music.
• Podcast Mode: Reduced bass, enhanced mid frequencies, suitable for podcasts and meetings.
• Game Mode: Enhanced bass and mid-high frequencies, increasing atmosphere and impact of sounds like gunfire. Perfect for FPS games (gunshots & explosions).
• Footstep Mode: Reduced bass and treble, enhancing footsteps and spatial awareness. Perfect for FPS games (footstep localization).
• Game Balance Mode: Reduced bass, balanced mid and treble, highlighting environmental sound and spatial awareness, suitable for strategy & adventure games.
• Custom Mode: Customize audio effects via the Middle Rabbit APP.

Switching Modes:

Quadruple-tap either earbud to switch EQ modes. [Icon: Four taps.]

[Illustration: Table listing EQ modes and their descriptions.]

10. Accessories

Included Items:

• Earbuds
• Charging Case
• USB-C Dongle
• USB Adapter
• USB-C Charging Cable
• Silicone Earmuffs

Note:

The USB-A adapter is for connecting the dongle (USB-C) and cannot be used independently.

[Illustration: Images of all included accessory items.]

11. APP

Middle Rabbit APP:

Download the Middle Rabbit APP to enhance your experience. Features include firmware updates, customization of audio effects, touch controls, and more.

Availability:

Available on Google Play [Icon: Google Play logo] and the App Store [Icon: App Store logo].

[Illustration: Smartphone displaying the Middle Rabbit app interface.]

12. Precautions

Important Notes:

• Regularly clean the charging contacts between the earbuds and the case for better charging efficiency.
• Do not immerse the earbuds and charging case in water or wash them with water. [Icon: Water drop with a cross ?❌.]
• Store in a cool, dry place (0°C-45°C) away from direct sunlight and high temperatures. Exceeding this range may cause automatic shutdown. [Icon: Thermometer.]
• Avoid prolonged high-volume use to protect your hearing. [Icon: Ear with sound waves and a warning symbol ?⚠️.]