IKEA KNOXHULT Wall Cabinet

Important Information & Safety Warnings

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall/floor. Fixing devices for the wall/floor are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls/floors in your home. For advice on suitable fixing systems, contact your local specialized dealer.

Safety Recommendations:

Place heaviest items in the lowest drawers.
Prevent children from climbing or hanging on the drawers, doors, or shelves.

Parts and Hardware

Before starting assembly, check that you have all parts and hardware listed below. Tools required: Screwdriver, Hammer, Spirit Level [ℹ️]. It is recommended to have two people for assembly [ℹ️].

Dowels (118331): 16x
Cam locks (101350): 12x
Cam lock screws (101350): 16x
Shelf supports (101577): 8x
Screws (101221): 6x
Wall mounting plates (115753): 3x
Wall brackets (115754): 3x
Hanging brackets (103693): 3x
Metal rails (various part numbers including 10124228, 10125040, 10135477, 10133939, 10124227, 10125044, 10135481, 10133941): 2 sets
Bag of screws (117241): 1x
Screws (119252): 2x (used in multiple steps)

Assembly Steps

Step 1: Prepare Side Panels

Attach three wall mounting plates (115753) to the inside of the two side panels using three screws (100347) for each plate. Ensure correct orientation as shown.

Step 2: Connect Base and Top Panels to Side Panels

Insert dowels (118331) into the pre-drilled holes on the side panels. Attach the base and top panels to the side panels using cam lock screws (101350) and the inserted dowels. Use 12 dowels and 16 cam lock screws in total.

Step 3: Join Cabinet Sections

Connect the two main cabinet sections together. Use four connecting screws (101350) to join the panels.

Step 4: Install Metal Rails

Attach the metal rails to the inside of the cabinet sections. There are two sets of rails, each consisting of multiple pieces. Ensure they are correctly aligned and oriented as per the diagrams.

Step 5: Secure Metal Rails

Secure the metal rails using dowels (118331). Use four dowels in total.

Step 6: Attach Second Set of Metal Rails

Attach the second set of metal rails to the opposite side panels using eight screws (101350).

Step 7: Attach Back Panel Supports

Attach three back panel support brackets (115753) to the cabinet structure.

Step 8: Attach Back Panels

Secure the back panels to the cabinet structure using two screws (119252).

Step 9: Join Cabinet Halves

Join the two halves of the cabinet structure together, aligning the panels.

Step 10: Secure Cabinet Halves

Secure the joined cabinet halves using two screws (119252).

Step 11: Attach Side Panels

Attach the remaining side panels to the main cabinet structure using two screws per side.

Step 12: Insert Shelf Supports

Insert eight shelf supports (101577) into the pre-drilled holes on the inside of the cabinet sections.

Step 13: Insert Glass Shelves

Carefully insert the two glass shelves onto the shelf supports.

Step 14: Place Top Panels

Place the top panels onto the assembled cabinet structure.

Step 15: Secure Top Panels

Secure the top panels using screws (101221). Multiple screws are used for this step.

Step 16: Final Cabinet Securing

Further secure the entire cabinet structure by inserting twenty-seven screws (101221) into the designated holes.

Step 17: Attach Wall Mounting Brackets to Cabinet

Attach three wall mounting brackets (103693) to the back of the assembled cabinet.

Step 18: Prepare for Wall Mounting

Attach the hanging brackets (115754) to the wall. Use appropriate wall fixings suitable for your wall type (not included) [ℹ️].

Step 19: Mount Cabinet to Wall

Carefully lift and hang the cabinet onto the wall brackets. Adjust the position as needed.

Step 20: Secure Cabinet to Wall Brackets

Ensure the cabinet is securely attached to the wall brackets.

Step 21: Install Sliding Doors

Insert the sliding doors into the cabinet. This may involve attaching runners with eight screws (101577).

Step 22: Doors Installed

The sliding doors are now installed and should operate smoothly.

Step 23 & 24: Insert Glass Shelves

Insert the glass shelves into the cabinet, resting them on the shelf supports.

Step 25: Final Wall Mounting Check

Re-check the attachment of wall mounting brackets and hanging brackets for secure installation.

Step 26: Cabinet Mounted

The KNOXHULT wall cabinet is now mounted on the wall.

Step 27-32: Additional Views

These pages provide further visual guidance on mounting and door installation, reinforcing the steps described above.

	EKET Cabinet Assembly Instructions \| IKEA A comprehensive guide to assembling the IKEA EKET cabinet, including essential safety warnings, a detailed parts list, and step-by-step instructions for building and securely mounting the unit to your wall.
	IKEA KNOXHULT Wall Cabinet Assembly Instructions Comprehensive guide for assembling the IKEA KNOXHULT wall cabinet, including safety warnings and step-by-step instructions. Learn how to securely attach your KNOXHULT unit to the wall to prevent tipping hazards.
	IKEA IVAR Storage System Assembly Guide Comprehensive assembly instructions for the IKEA IVAR storage system, detailing safety warnings, a parts list, and step-by-step guidance for various configurations including wall-mounted cabinets and freestanding shelving units, as well as sliding door installation.
	KNOXHULT Wall Cabinet Assembly Instructions and Safety Information Detailed assembly guide and safety instructions for the IKEA KNOXHULT wall cabinet. Learn how to safely install and use your KNOXHULT unit, including important warnings about tip-over prevention and step-by-step assembly instructions.
	HAVSTA Storage Series - IKEA Explore the versatile HAVSTA storage series from IKEA, featuring solid wood construction with options for glass doors, sliding doors, and TV benches. Discover various combinations and customization possibilities to suit your home and needs.
	IKEA KNOXHULT Wall Cabinet Assembly Instructions Comprehensive guide for assembling the IKEA KNOXHULT wall-mounted cabinet, featuring detailed steps, safety warnings, and part identification. Ensure secure wall mounting for safety.
	EKET Assembly and Mounting Guide \| IKEA Comprehensive assembly and mounting instructions for the IKEA EKET storage system. Learn how to safely install EKET units and combine them for your storage needs.
	JOSTEIN Shelving Unit Assembly Instructions \| IKEA Follow these IKEA JOSTEIN assembly instructions to safely build and mount your shelving unit. Includes parts list, step-by-step guide, and essential safety warnings about furniture tip-over.