Outsunny 845-592 Assembly & Instruction Manual
IMPORTANT. RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Product Identification
Model Number: 345-592
Document Identifier: INbva029_GL
Brand: Outsunny
Product Type: Walk-In Lean-to Greenhouse
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Curved Pole | x 6 |
| 2 | Curved Pole | x 2 |
| 3 | Straight Pole (40cm) | x 4 |
| 4 | Straight Pole (72cm) | x 2 |
| 5 | Straight Pole (68cm) | x 12 |
| 6 | Straight Pole (102cm) | x 11 |
| A | 3-Way Connector | x 8 |
| C | 4-Way Connector | x 3 |
| D | 3-Way Connector | x 6 |
| E | 3-Way Connector | x 5 |
| G | Ground Sheet | x 1 |
| H | Guy Rope | x 4 |
| I | Peg / Stake | x 4 |
Assembly Instructions
Step 1: Base Frame Assembly
Assemble the base of the greenhouse. Connect the straight poles (3, 4, 5, 6) using the connectors (A, D). Refer to the diagram for specific placement and connections. Ensure poles are securely inserted into the connectors.
Diagram Description: Shows the initial assembly of the base frame using poles of varying lengths and different types of connectors. Close-up views highlight how poles connect to connectors.
Step 2: Upright and Top Frame Assembly
Attach upright poles (6) to the base connectors. Connect the curved poles (1, 2) to the top of the upright poles using connectors (A, D, E). Use the provided diagrams to ensure correct pole lengths and connector types are used for each connection point. The structure will begin to take its greenhouse shape.
Diagram Description: Illustrates the addition of vertical poles and the curved roof structure. Detailed insets show how poles and connectors fit together, including the use of connectors C and E for the roof arch.
Step 3: Final Structure and Securing
Complete the frame by adding any remaining poles and connectors as indicated in the diagrams. Once the frame is fully assembled, place the ground sheet (G) if applicable. Secure the greenhouse to the ground using the guy ropes (H) and pegs/stakes (I). Attach the guy ropes to the designated points on the frame and stake them into the ground, ensuring the greenhouse is taut and stable.
Diagram Description: Shows the completed greenhouse frame with the cover (G) in place. Guy ropes (H) are shown attached to the frame and staked to the ground (I) for stability.
Step 4: Cover Installation (Implied)
While not explicitly detailed with steps, the final diagram shows the greenhouse with its cover. It is implied that the cover is placed over the assembled frame and secured. Ensure the cover is oriented correctly before fully attaching.
Diagram Description: A final view of the assembled greenhouse, appearing complete with its cover.
Important Notes
- Keep this manual for future reference.
- Read all instructions carefully before assembly.
- Ensure all parts are present before starting assembly.
- Assemble on a flat, stable surface.
- Two people may be required for assembly.
- Do not overtighten connectors.
Contact Information
For assistance or replacement parts, please refer to the documentation provided with your purchase or contact the retailer.
