easy@Home Pregnancy Test

Introduction

The easy@Home Pregnancy Test is an ultrasensitive HCG test designed to detect pregnancy as early as possible. It is highly accurate and provides results within minutes.

How to Use

1. When to Test

You can test any time of day, but the first morning urine is recommended for the earliest detection of pregnancy as it contains the highest concentration of HCG.

2. Collecting the Urine Sample

Use a clean and dry container to collect a urine sample. [clean cup] The test can also be performed by directly urinating on the absorbent tip.

3. Performing the Test

Remove the test stick from its foil pouch just before use. Remove the cap.

Method A: Direct Urination

Hold the absorbent tip downwards and urinate directly onto the absorbent tip for the specified time (usually 5-10 seconds). Ensure the urine saturates the absorbent tip.

Method B: Using a Sample Cup

Dip the absorbent tip into the collected urine sample for the specified time (usually 5-10 seconds). Ensure the urine level does not exceed the maximum line indicated on the test stick.

Replace the cap and lay the test stick on a flat, clean surface with the result window facing upwards.

4. Waiting for Results

Wait for 3 to 5 minutes for the results to appear. Do not read results after 10 minutes.

Reading the Results

The test works by detecting the presence of the HCG hormone in urine. The test stick has two windows: a control window and a result window.

Positive Result (Pregnant):

Two distinct pink lines appear. One line will be in the control window, and another line will be in the result window. The intensity of the lines may vary. [two lines]

Negative Result (Not Pregnant):

One pink line appears in the control window. The result window will be blank. [one line]

Invalid Result:

If no control line appears, or if a line appears in the result window but not the control window, the test is invalid. Repeat the test with a new test stick. [invalid result symbol]

Precautions and Warnings

• For in-vitro diagnostic use only.
• Keep out of reach of children.
• Do not use after the expiration date.
• Do not use if the foil pouch is damaged.
• Store in a cool, dry place.
• Avoid freezing.
• Handle test sticks carefully.
• Do not drink the urine sample.
• Consult a healthcare professional if you have any concerns or questions.

Storage

Store the test kit at room temperature (15-30°C or 59-86°F) in its original sealed pouch until ready to use.

Manufacturer Information

Manufactured by [Manufacturer Name].

For inquiries, please refer to the product packaging or retailer.

CE Mark: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). [CE mark]

ISO Certification: Indicates adherence to international standards for quality management. [ISO certification]