Locinox Venus Gate Motor
Let's make it better together
Safety and Installation Notices
Locinox declines all liability caused by improper use or use other than that for which the automated system was intended.
- Do not install the equipment in an explosive atmosphere: the presence of inflammable gas or fumes is a serious danger to safety.
- Connection to the power supply must be made by a professional electrician. Cut off the mains power supply before installation or maintenance interventions.
- The safety of this equipment is only guaranteed when it is effectively earthed in conformity with current safety standards and regulations.
- Respect the minimum cable sections for the power and signal cables.
- Prepare suitable piping and ducts for routing the electrical cables, ensuring protection against mechanical damage.
- The gate structure should be solid and suitable. If necessary, add suitable reinforcement at the anchoring points. The use of a steel gate post with a thickness of 3mm is recommended, minimum 2mm. Aluminum gate post requires a thickness of 5mm.
- The hinges should be in good condition and greased; bearing hinges are recommended. The forces on the gate hinges can be high during fast and powerful gate movements. It is recommended to add a safety cable and oversize the gate hinges.
- The gate should be placed level. Do not install on tilted gates.
- The Venus operator arm should be installed on the top side. Do not install the product upside down.
- Ensure there is a stop installed in the closing position. An opening stop is not mandatory, but recommended.
- Guarantee sufficient distance between the moving gate and the gate post to avoid finger entrapment.
- Follow the current status of directives, standards and country-specific regulations. Europe: EN16005 / US: ANSI 156.19
- In compliance with Machine Directive 2006/42/EC, a risk analysis must be performed and automated gate identified in accordance with CE Marking directive 93/68/EEC before the system is commissioned.
Product Description
Models
- VENUS-S: Reversible motor for pedestrian gates with integrated electronics including sliding arm
- VENUS-A: Reversible motor for pedestrian gates with integrated electronics including articulated arm
- VENUS-G: Reversible motor for pedestrian gates with integrated electronics, including compact arm for 180° hinges
Accessories
- VENUS-ARM-S: Sliding arm for the Venus motor
- VENUS-ARM-A: Articulated arm for the Venus motor
- VENUS-ARM-G: Compact arm for the Venus motor
- VENUS-RAIL: Accessory for VENUS-S and VENUS-A in combination with 180° hinges
- VENUS-ADAPTERPLATE: Adapter plate for mounting on wall or 60 mm post
Intended Use
The Venus gate motor is designed for the automatic opening and closing of pedestrian swing gates and outdoor use. This is a reversible motor, so an (electric) lock is mandatory. The operating speed is limited to low-energy settings according EN 16005 and ANSI 156.19 standards. Any improper use, as well as modifications to the products, is not permitted.
Technical Specifications
| Specification | Value |
|---|---|
| Power supply (V) | 110-240V AC (50/60Hz) |
| Motor voltage (V) | 24V DC |
| Nominal power / excl output power (W) | 30 W |
| Max power (W) | 150 W |
| Max motor torque (Nm) | 150 Nm |
| Operating temperature range (°C) | -30°C - 70°C |
| Opening time to 90° (s) | > 4 sec |
| Degree of protection | IP 54 |
| Weight excluding arm (kg) | 6.1 kg |
Connection Scheme
The 'Locinox' installation app is required for initialization and configuration.
- Power Supply: 110-240V AC ±10% 50/60Hz
- Programmable Outputs (3): Electric lock (Fail Open / Fail Close), Flashlight/light with timer, 24V DC AUX. Total output power: max 2A (48W).
- Programmable Inputs (3): Activation device (N.O.), Safety device (N.C./8K2).
Installation Diagrams
Visual diagrams illustrate the step-by-step installation process for the VENUS-S, VENUS-A, and VENUS-G models, including arm attachment and motor setup.
Motor Setup
Instructions for motor setup and configuration are provided, with a recommendation to use the 'Locinox' installation app. The app is available on Google Play and the App Store.
Technical Support
For additional information or assistance, contact your dealer or visit the Locinox website for more technical information or email info@locinox.com. Keep the serial number of your product handy for future support.
Contact Information:
- Locinox HQ: +32 56 77 27 66, help@locinox.com, www.locinox.com
- Locinox USA: 877-LOCINOX, helpusa@locinox.com, www.locinoxusa.com
Copyright and Notices
Copyright© 2023 Locinox. All rights reserved. This product incorporates copyright protected technology. Use of this technology must be authorized by Locinox Corporation. Reverse engineering or disassembly is prohibited.
The contents of this publication are subject to change without notice. Locinox Corporation reserves the right to alter the contents at any time.
