SanDisk Professional PRO-G40 SSD

Important Information

Please read the following carefully before using this product. Keep these instructions for future reference.

User Manual: See http://www.sandiskprofessional.com/support

Safety & Handling Instructions

• Avoid touching the SanDisk Professional device's connector.
• Handle the SanDisk Professional device using its edge or frame.
• Do not remove, damage, or cover any device labels.
• Ensure the SanDisk Professional device does not exceed maximum operating temperature.
• Exercise caution when handling a SanDisk Professional device as it may have heated up.

Additional Safety Instructions

• Keep the SanDisk Professional device away from direct sunlight, moisture, and temperature extremes.
• Do not bend, flex, or drop your SanDisk Professional device.
• The user is responsible for complying with all environmental, safety, and other usage specifications.
• Keep the SanDisk Professional device away from sinks, drinks, bathtubs, showers, rain, and other sources of moisture.
• Moisture can cause electric shocks with any electronic device.
• Do not disassemble, crush, short circuit, or incinerate the SanDisk Professional device as it may cause fire, injury, burns, or other hazards.

Installation Guidelines

• Before installing the SanDisk Professional device, please take all necessary precautions to comply with the Desktop/Notebook manufacturer's handling instructions.
• For optimum performance, download the latest firmware for your SanDisk Professional device from http://www.sandiskprofessional.com/support.

Disposal Instructions

• Do not dispose of the SanDisk Professional device with unsorted waste.
• Improper disposal may be harmful to the environment and human health.
• Please refer to your local waste authority for information on return and collection systems in your area.

Obtaining Service

SanDisk Professional values your business and always attempts to provide you the very best of service. Should you encounter any problem, please give us an opportunity to address it before returning this Product. Most technical support questions can be answered through our knowledge base or e-mail support service at http://www.sandiskprofessional.com/support.

SanDisk Professional Manufacturer's Retail Products Limited Warranty

(All Regions Except Australia)

Warranty Information

This SanDisk Professional device is covered by a 5-year limited warranty (or 5-year warranty in regions not recognizing "limited") from the date of purchase, subject to the applicable warranty terms and conditions, as defined in www.sandisk.com/wug.

How to Make a Warranty Claim

Please go to www.sandiskprofessional.com and select "support" for more information on making a warranty claim (SanDisk Professional Support Page).

If it is determined that your product may be defective, you will receive an RMA and product return instructions. You are responsible for any expenses associated with a claim under SanDisk Professional's Limited Warranty.

You must send your product in a secure, prepaid package, to the address provided with your RMA number. Proof of purchase is required for all warranty claims.

SanDisk Professional Manufacturer's Retail Products Limited Warranty (Australia)

Warranty Information

SanDisk Professional warrants to the end user, that this product, excluding content and or software supplied with or on the product, will be free from material defects in manufacture, will conform to SanDisk Professional's published product specifications and be fit for normal use for a period of 5 years from the date of purchase, provided that the product is legally placed on the market.

When making a claim under this Limited Warranty, SanDisk Professional may at its option repair this product or provide you with an equivalent product; and if unable to repair or replace the product, will refund the purchase price. The full terms of SanDisk Professional's warranty and warranty period are available at: www.sandisk.com/wug.

Warrantor Details

Western Digital Technologies, Inc.
951 SanDisk Drive
Milpitas, CA 95035, U.S.A.
Tel: 1 (800) 275-4932 (US local toll free) or 1 (310) 449-4599 (US)

How to make a warranty claim

Before you return the product you must first obtain a Return Material Authorization (RMA) number. Please either:

• Contact SanDisk Professional at 1 800 262 504 (M-F | 9 am – 6 pm New South Wales Time) or email SanDisk Professional (support@sandiskprofessional.com) and provide proof of purchase (showing date and place of purchase and name of the reseller) and product name, type and number; or
• Contact the dealer from whom you originally purchased the product.

Please go to www.sandiskprofessional.com/support for more information on making a warranty claim (SanDisk Professional Support Page).

If it is determined that your product may be defective, you will receive an RMA number and product return instructions. You are responsible for any expenses associated with a claim under SanDisk Professional's Limited Warranty. You must send your product in a secure, prepaid package, to the address provided with your RMA number. Proof of purchase is required for all warranty claims.

Australian consumers only

Notwithstanding the terms of this Limited Warranty, SanDisk Professional's products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the products repaired or replaced if the products fail to be of acceptable quality and the failure does not amount to a major failure.

Regulatory Compliance

FCC CLASS B INFORMATION

NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the device.

CAN ICES-003 (B) / NMB-003 (B) Statement

Cet appareil numérique de la classe B est conforme à la norme NMB-003 (B) du Canada. This device complies with Canadian ICES-003 (B).

Safety Compliance

Approved for US and Canada. CAN/CSA-C22.2 No. 62368-1-14: Audio/Video, Information and Communication Technology Equipment Part 1: Safety Requirements.

Approuvé pour les Etats-Unis et le Canada. CAN/CSA-C22.2 No. 62368-1-14, Sûreté d’équipement de technologie de l’information.

CE Compliance for Europe

Hereby, Western Digital declares compliance of this equipment to the applicable Council Directives of the European Union, including the EMC Directive (2014/30/EU), the Low Voltage Directive (2014/35/EU) and the RoHS Directive (2011/65/EU) as amended by Directive 2015/863/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.wdc.com/products/EUDoC.

Specifications

Trademarks and Copyright

SanDisk, the SanDisk design, the SanDisk logo, SanDisk Professional, and the SanDisk Professional logo are registered trademarks or trademarks of Western Digital Corporation or its affiliates in the US and/or other countries. All other marks are the property of their respective owners. The NVMe™ word mark is a trademark of NVM Express, Inc. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

Product specifications subject to change without notice. Pictures shown may vary from actual products.

Western Digital Technologies, Inc. is the seller of record and licensee in the Americas of SanDisk® products.

©2022 Western Digital Corporation or its affiliates. All rights reserved.

P003-000030-8800 July 2022