Quick Start Guide

1. Product Description

1.1 Packing List

For more information on products, please visit: www.likcut.com

1.2 Cutting Machine Parts

The cutting machine includes the following parts:

• Power Indicator Light
• Connection Indicator Light
• Clamp
• Material Tray
• Manual Feed Slot
• Storage Box Cover
• Front Cover
• Power Cord Port
• Type-C Port (for data transmission only)
• Non-Slip Silicone Pad

2. Preparation Before Use

2.1 Machine Inspection

Place the cutting machine on a flat, dry surface. Ensure a minimum of 20cm (approximately 8 inches) of space is left behind the machine for proper operation.

2.2 Blade Inspection

1. Open the front cover of the cutting machine.
2. Verify that the blade inside the clamp is correctly installed. (Note: The blade is pre-installed upon delivery and is ready for use.)

2.3 Power Supply Connection

1. Insert the power cord (02) into the power adapter (01).
2. Insert the round end of the power adapter (01) into the power port of the machine.
3. Plug the power cord (02) into an electrical outlet.
4. If the power indicator light on the top of the machine is solid green, the machine is powered on.

A flashing blue connection indicator light signifies that the machine is ready for connection.

3. Software Download

3.1 Download the Mobile App

Method 1: Search for the "Likcut" app on the App Store® or Google Play™ to download and install.

Method 2: Scan the QR code to download the app. You can use your phone's camera, a built-in browser scanner, or a dedicated scanner app.

Note: The Safari browser on Apple devices does not support QR code scanning. Please use your device's built-in code scanner instead.

3.2 Download the Desktop App

Visit support.likcut.com to download and install the desktop application. Choose the installer package compatible with your operating system.

4. Quick Start Guide

4.1 For the Mobile App

1. Open the "Likcut" app.
2. Select or search for a design on the homepage and import it to the canvas.
3. Adjust the design on the canvas to your preferred size, then click [Make].
4. Grant necessary permissions and follow the on-screen instructions to connect the cutting machine. Your phone will prompt for connection permissions.
5. Select the size of the cutting mat (06) and the corresponding material type.
6. Feed the material into the machine. Click [Start] once detection is complete.
7. Remove the mat from the machine after the cutting process is finished.
8. Use the weeder (04) on the mat to carefully remove the excess parts of the design.
9. The weeding process is now complete.
10. Remove the grid transfer tape (09) and attach its adhesive side to the design.
11. Use your hand or a tool to press the transfer tape (09) firmly onto the design, then peel the tape away from the bottom. If the design is not transferring successfully, press more firmly on the design area of the tape.
12. Attach the design to a clean, flat, and dry surface. Press the design area tightly with your hands.
13. Remove the transfer tape (09). If the design remains on the tape, press more firmly on the design area before peeling.

4.2 For the Desktop App

4.2.1 Wired Connection

1. Insert the Type-A (wider) end of the data cable (03) into a USB port on your computer.
2. Insert the Type-C (narrower) end of the cable (03) into the cutting machine's port.
3. Open the Likcut desktop application.
4. Select or search for a design on the homepage and import it to the canvas.
5. Adjust the design on the canvas to your preferred size, then click [Make].
6. Select your Likcut S501 machine from the list and connect.

4.2.2 Wireless Connection

1. On your computer, enable Bluetooth and access its settings.
2. Open the Likcut desktop application.
3. Select or search for a design on the homepage and import it to the canvas.
4. Adjust the design on the canvas to your preferred size, then click [Make].
5. Select your Likcut S501 machine from the list and connect via Bluetooth.

4.2.3 Guide After Connection

1. Select the size of the cutting mat (06) and the corresponding material type.
2. For instructions on mat loading and subsequent operations, please refer to Section 4.1, Steps 6-13 in this guide.

5. Other Instructions

5.1 Indicator Light Instructions

5.2 Safety Instructions

1. The weeder is sharp. Please use it carefully and keep it away from children.
2. To avoid damage to the cutting machine, DO NOT insert the Cutting Mat or other materials from the back of the machine.
3. To prevent pinching, DO NOT touch the inside of the cutting machine while it is running. Ensure children DO NOT put their hands inside the cutting machine.
4. The blade is sharp. Please use it carefully and keep the blade away from children.

6. More Tutorials and Video Guides

Get more tutorials, video guides, and FAQs through the following methods:

Method 1: Visit support.likcut.com.

Method 2: Visit www.youtube.com/@Likcut_official.

Method 3: Refer to the tutorials section within the "Likcut" app. Navigate to [Profile] and click [Help & Feedback].

7. Information to User

7.1 FCC INFORMATION (U.S.A.)

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
• Consulting the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
• This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

7.2 ISED NOTICE (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from a person's body.

7.3 AVS ISDE (Canada)

This section provides information in French regarding Canadian compliance, reiterating the conditions for operation and RF exposure limits, similar to section 7.2.

7.4 European Union

Information for users on collection and disposal of old equipment: Symbols on the products, packaging, and/or accompanying documents indicate that used electrical and electronic products should not be mixed with general household waste. These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer for the correct disposal method. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service, or the point of sale where you purchased the items.

Wireless Information:

SIMPLIFIED EU DECLARATION OF CONFORMITY: Changsha Benlei Technology Co., Ltd. declares that this product is in compliance with Radio Equipment Directive 2014/53/EU. The full texts of the EU declaration of conformity are available at the following internet address: https://www.Likcut.com.