LIVARNO home LED Table Lamp User Manual and Safety Guide

Introduction

Congratulations on your new LIVARNO home LED Table Lamp. You have selected a high-quality product. This instruction manual is part of the product and contains important information regarding safety, use, and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Use the product only as described and for its intended purpose. When passing this product on to others, please include all documentation. Before first use, verify the correct voltage and ensure all parts are properly installed.

Pictograms Used

ℹ️ Read the instructions!
? This light is only suitable for indoor use in dry and enclosed spaces.
⚡ Electric shock warning! Danger to life!
✅ Safe working
? Caution! Risk of burns due to hot surfaces!
V [Volt]
AC [AC Voltage]
ON/OFF Switching cycles
Hz [Hertz]
W [Watt]
II [Safety Class II]
⏳ [Operating Life]
⏱️ [Turn-on Time]
⚠️ Observe the warning and safety instructions!
? Danger to life and risk of accident for infants and children!
♻️ Dispose of packaging and device in an environmentally-friendly way! The packaging is made from 100% recycled paper.
Ra [Colour Rendering Index]
?️ [Light Temperature in Kelvin]
? [Lumen]

Intended Use

This light is only suitable for indoor use in dry and enclosed spaces. This product is intended for private household use only and for normal operation.

Scope of Delivery

Check immediately after unpacking that all parts are complete and the product is in proper condition.

1 Table lamp (Model 14152102LE / 14152202LE)
1 Glass shade
1 LED light bulb
1 Tool (for Model 14152202LE)
1 Instructions for use

Parts Description

Illuminant (Light Bulb)
In-line switch
Mains plug
Lamp base
Lamp socket
Lamp glass (Shade)
Threaded ring
Flexible lamp arm (for Model 14152202LE)
Tool (for Model 14152202LE)

Technical Data

Model No.: 14152102LE / 14152202LE
Operating voltage: 230–240 V~, 50 Hz
Lamp socket: E14
Protection class: II
Bulb: LED E14, max. 5 W

Safety

Damage due to failure to comply with these operating instructions will invalidate the warranty! Briloner Leuchten GmbH & Co. KG assumes no liability for consequential damage, material damage, or personal injury due to improper handling or failure to comply with safety instructions.

Safety Notices

WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN! Never leave children unattended with the packaging material, as it presents a suffocation danger. Children frequently underestimate dangers. This device may be used by children aged 8 years and up, and by persons with reduced physical, sensory, or mental capacities, or lacking experience and/or knowledge, when supervised or instructed in safe use and understanding the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be performed by children without supervision.

RISK OF INJURY! Do not leave the lamp or packaging material lying unattended. Plastic film, bags, or Styrofoam can become dangerous toys for children.

Avoid the Risk of Fatal Injury from Electric Shock

Luminaire with strong conducted disturbances can cause nuisance triggering, which can be self-recovered. Always check the mains plug for damage before connecting the light to the mains. Never use the light if it shows any signs of damage. In case of damage, repairs, or other problems, please contact the service centre or an electrician. Ensure the light does not come into contact with water or other liquids. Never open or insert anything into electrical fittings or equipment (e.g., switches, fitting socket), as this poses a risk of fatal injury from electric shock. Only touch the insulated area of the mains plug when connecting or disconnecting from the mains. To prevent hazards, a damaged flexible outer lead must only be exchanged by the manufacturer, its service representative, or an equally qualified specialist.

Initial Use

Mounting the Lamp

Note: Remove all packaging materials from the product.

Loosen the threaded ring [Part 7] from the lamp socket [Part 5]. For Model 14152202LE, use the included tool [Part 9].
Place the lamp glass [Part 6] over the lamp socket [Part 5] and position it correctly.
Screw the lamp glass [Part 6] to the threaded ring [Part 7]. Ensure it is correctly positioned. For Model 14152202LE, use the included tool [Part 9].
Use a clean, lint-free, dry cloth to insert the illuminant [Part 1].
Screw the illuminant [Part 1] clockwise into the lamp socket [Part 5].
Plug the mains plug [Part 3] into a properly installed socket.

Your light is now ready to use.

Switching the Light On/Off

Touch the in-line switch [Part 2] to switch the lamp on or off.

Adjusting the Light (Model 14152202LE)

CAUTION! RISK OF BURNS DUE TO HOT SURFACES!

Note: Never change the direction of the light while it is switched on. Allow the lamp to cool down completely. Adjust the flexible lamp arm [Part 8] to the desired position.

Changing the Light Bulb

Switch the lamp off.

WARNING! RISK OF ELECTRIC SHOCK! First unplug the mains plug [Part 3] from the socket.

CAUTION! RISK OF BURNS DUE TO HOT SURFACES! Allow the lamp to cool down completely.

Use a clean, lint-free, dry cloth when replacing the illuminant [Part 1].
Unscrew the defective illuminant [Part 1] from the lamp socket [Part 5] by turning counter-clockwise.
Screw a new illuminant clockwise into the lamp socket [Part 5].
Plug the mains plug [Part 3] into a properly installed socket.

Your light is now ready to use.

Maintenance and Cleaning

Switch the lamp off.

WARNING! RISK OF ELECTRIC SHOCK! First remove the mains plug [Part 3] from the socket.

CAUTION! RISK OF BURNS DUE TO HOT SURFACES! Allow the lamp to cool down completely.

WARNING! RISK OF ELECTRIC SHOCK! For electrical safety, never clean the light with water or other liquids, or immerse it in water. Do not use solvents, benzene, or similar substances, as they could damage the light. Only use a dry, lint-free cloth for cleaning.

Plug the mains plug [Part 3] into a properly installed socket.

Disposal

The packaging is made entirely of recyclable materials, which can be disposed of at local recycling facilities. Observe the marking of packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.

To protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in household waste. Information on collection points and their opening hours can be obtained from your local authority.

Warranty and Service

Warranty

You receive a 36-month warranty on this product, valid from the date of purchase. The appliance has been carefully produced under strict quality control. Within the warranty period, Briloner Leuchten GmbH & Co. KG will rectify, free of charge, all material or manufacturing defects. In the event that a defect arises during the warranty period, please send the device to the listed service centre address, quoting the model number: 14152102LE / 14152202LE. Wear parts (such as bulbs) and damage caused by improper handling, non-observance of operating instructions, or unauthorized interference are excluded from the warranty. The performance of services under warranty does not extend or renew the warranty period.

Service Address

Briloner Leuchten GmbH & Co. KG
Im Kissen 2
59929 Brilon
GERMANY

Tel.: +49 29 61 / 97 12-800
Fax: +49 29 61 / 97 12-199
E-Mail: kundenservice@briloner.com
Website: www.briloner.com

Please have your receipt and the item number (e.g., IAN 365679_2010) ready as proof of purchase when inquiring about your product.

Declaration of Conformity

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer