Welcome and Important Information
Thank you for purchasing this product. Game of Bricks utilizes thin aviation-grade wire for a seamless, hidden-line effect. This wire offers high tension and pressure tolerance but, due to its delicate nature, please exercise caution to avoid cutting it during installation, as it may be susceptible to shearing. Always ensure that brick pieces are not pressed down directly onto the wire.
Should you encounter any challenges, Game of Bricks support is available at support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.
Installation Guide
Step 1 (Bag 1)
Begin by taking the components from Bag 1. This bag contains a single small LED light with an attached wire. The image shows this LED being carefully inserted into a specific brick assembly within the LEGO Singapore model, likely a part of the base or a smaller architectural element.
Step 2 (Bag 2)
In Step 2, use the components from Bag 2, which includes multiple small LED lights, each with its own wire. These LEDs are positioned along the base of the model, near the water features or the initial building foundations. The wires are discreetly routed behind or between the LEGO bricks.
Step 3 (Bag 3)
This step involves installing LED lights into the lower sections of the taller buildings in the Singapore model. The images demonstrate feeding wires through the internal spaces of the LEGO bricks and connecting them to small LED components, ensuring a clean look.
Step 4 (Bag 4)
For Step 4, focus on the main towers. This step utilizes multiple LED modules, often connected to a strip, which are then integrated into the vertical structure of the skyscrapers. Careful placement and routing of wires are essential to illuminate the facades effectively.
Step 5 (Bag 5)
The final installation step, using components from Bag 5, involves the bridge-like structure connecting the buildings. LED strips or modules are attached to the underside or sides of this section. The process culminates with connecting the main power wires, including a USB cable labeled "SZ-KY2366", to the light kit.
Final Connection and Power
Complete the installation by connecting the light kit to the provided battery box or the USB power cable. If you choose to use an alternative power source, please ensure its maximum voltage does not exceed 6V.
