Manuals+

Scosche SN1527 In-Dash Installation Kit for 2000-Up Saturn

Introduction

Thank you for purchasing the Scosche SN1527 kit. This kit was manufactured with the highest of quality standards.

⚠️ CAUTION: DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL BEFORE THE INSTALLATION TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/OHM METER OVER A TEST LIGHT TO CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE'S COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY DEPLOY CAUSING SERIOUS INJURY OR DEATH.

Notes:

SN1527 Pocket Preparation

1. For added pocket strength, attach screw as shown in illustration.

Diagram showing the back view of the kit's pocket, with an arrow pointing to a screw hole indicating where to attach a screw for added strength.Diagram showing the bottom view of the kit's pocket.

Installation Instructions

2003-05 Saturn Ion / 2000-UP Saturn L Series

Radio Removal and In-Dash Installation:

  1. Use panel removal tool and pull dash bezel towards self, unplug and pull away.
  2. Using a 7mm nutdriver, extract (2) 7mm bolts and pull out radio, unplug and remove.

2000-02 Saturn SL, SC, SW, Series

Radio Removal and In-Dash Installation:

  1. Extract (2) 7 mm screws from the driver's instrument panel located between the door and vent.
  2. Using panel removal tool, remove dash bezel.
  3. Extract (2) 7 mm screws from the radio, disconnect and remove.

Vehicle Applications

VehicleModel
SATURN 2003-05ION
SATURN 2000-UPL SERIES
SATURN 2000-02SL, SC, SW SERIES

Installation Kit Components

The in-dash installation kit includes the following components:

Diagram illustrating the components of the in-dash installation kit. It shows the mounting panel, a pocket that fits into it, a radio sleeve, a DIN radio, and a DIN trim ring that surrounds the radio. An instruction "BEND TABS OUTWARD" is shown near the pocket. A rear support strap is also depicted.

CAUTION: REAR SUPPORT AVAILABLE SEPARATELY. REAR SUPPORTING THE RADIO ADDS TO THE INSTALLATION'S STRUCTURAL INTEGRITY.

Car Stereo Connectors

These connectors provide easy connection of your car stereo to the factory wiring harness.

GM04 2000-UP Saturn

Image of a car stereo connector labeled "GM04 2000-UP Saturn", designed for connecting a car stereo to the factory wiring harness.

Liability Disclaimer

This instruction booklet is based on carefully documented data and research of automobile dash disassembly, wire harness/codes and information pertaining to installation of this kit (SN1527) in 2000-UP Saturn Vehicles. Scosche Industries, Inc. cannot be held responsible for discrepancies/inconsistencies that may occur due to automobile manufacturing changes or options, or damage that may occur in the automobile during the installation of components while using this booklet.

Scosche products are your ultimate choice for all your audio needs.

PDF preview unavailable. Download the PDF instead.

sn1527b-installation-guide Acrobat Distiller 6.0 (Windows)

Related Documents

Preview Scosche SN1527 Installation Kit for Saturn 2000-Up: Guide & Components
Comprehensive guide to installing the Scosche SN1527 in-dash stereo installation kit in 2000-up Saturn vehicles, including Ion, L Series, SL, SC, and SW models. Covers component identification, safety precautions, pocket preparation, and detailed radio removal/installation steps.
Preview 2002-03 Saturn Vue SUV Installation Guide
A guide for installing aftermarket stereos and speakers in a 2002-03 Saturn Vue SUV, including wire color codes and disassembly instructions.
Preview Scosche GM1504F: In-Dash Installation Kit for 1982-2005 General Motors Vehicles
Comprehensive installation guide for the Scosche GM1504F in-dash kit, designed for 1982-2005 General Motors vehicles. This manual provides detailed instructions for removing factory radios and mounting aftermarket car stereos across various GM brands including Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac.
Preview Scosche GM1587 In-Dash Installation Kit: Installation Guide for Chevrolet & Pontiac Vehicles
Provides step-by-step instructions for installing a car stereo using the Scosche GM1587 in-dash installation kit. Covers radio removal procedures for 2004-2006 Chevrolet Malibu, Malibu Maxx, Equinox, Cobalt, 2006 HHR, Pontiac G6, and 2006 Saturn Ion vehicles, along with kit modification details.
Preview Scosche S3GMLAN S3-1 Interface Harness Installation Guide for GM Vehicles
Detailed installation guide for the Scosche S3GMLAN S3-1 interface harness, designed for 2006-up GM LAN 29 Bit data systems. Retain factory chimes and steering wheel controls. Includes wiring diagrams and application compatibility.
Preview Scosche S3GM11L: GM LAN 11 Bit Interface Harness Installation Guide
Detailed installation guide for the Scosche S3GM11L interface harness, designed for 2006-up GM LAN 11 Bit data systems. Learn how to replace your factory stereo while retaining safety chimes and steering wheel controls for Chevrolet, Pontiac, and Saturn vehicles.
Preview Scosche GM2000SW Factory Stereo Replacement Interface with Chime and Steering Wheel Control Retention for GM Vehicles
The Scosche GM2000SW Car Stereo Replacement Interface allows you to replace your GM factory stereo while retaining essential safety and warning chimes, along with steering wheel controls. This guide provides installation instructions, wiring diagrams, vehicle compatibility, and troubleshooting for seamless aftermarket stereo integration in Class II data systems.
Preview Scosche LPGM35 GM LAN Interface: Retain Steering Wheel Controls & Chimes
Guide to installing the Scosche LPGM35 GM LAN interface for replacing factory stereos in 2004-2016 GM vehicles, retaining steering wheel controls, safety chimes, and accessory power.