LEKATO TANK-G Guitar Effect Processor
Thank you for choosing LEKATO products. Please read this Owner's manual thoroughly before using, and keep it in a safe place for later reference. If there are any questions regarding this product, please feel free to contact LEKATO at support@lekatodeal.com or visit https://lekatotech.com.
Quick Start Guide
The TANK-G is a portable and multifunctional guitar effector with 36 editable presets. Users can also customize effect chains and save them. The TANK-G features a built-in battery, Noise Gate, 9 Preamp models, 3-band EQ, 3 Modulation effects, 3 Delay effects, 3 Reverb effects, 8 IR CAB simulator slots, and a Tuner. You can download computer software or an APP from official LEKATO channels to edit presets, exchange presets, share presets, import/export presets, and customize the footswitch light color for each preset. You can also import IR files and restore factory settings. Additionally, it supports mobile phone recording, BT music playback, headphone monitoring, XLR balanced output, and acts as a computer sound card. It integrates a variety of functions, is easy to carry, and offers excellent sound.
I. Attentions
- Power Supply: Equipped with a built-in battery that lasts for 12 hours on a full charge. Can be charged with a 5V adapter or power bank. Charging takes approximately 4 hours. The display shows "U" when the battery is low. Avoid prolonged use when the battery is low to prevent unstable performance.
- Connection: Ensure all related equipment is powered off before connecting or disconnecting the device.
- Electrical Interference: Keep the equipment away from sources of electromagnetic interference such as radios and televisions.
- Location: Avoid exposing the unit to heat sources, magnetic fields, direct sunlight, high temperature/humidity, dusty or dirty locations, and strong vibrations or shocks to prevent damage.
II. Effectors Chain Diagram
A visual representation of the signal chain: IN -> Tuner -> NSGATE -> AMP -> MOD -> Delay -> Reverb -> IR CAB -> XLR OUT / USB / BT / Phone Output.
III. Rear Panel
- IN: 1/4" MONO audio input jack.
- Audio Output Jack: Supports mobile phone recording.
- Earphone Output.
- OUT: 1/4" MONO audio output jack.
- Power Switch.
- Charging Indicator: Off during normal use, red during charging, blue when fully charged.
- USB Jack: For charging, computer sound card functionality, editing presets, and importing IR files.
IV. Front Panel
The front panel features numerous controls and connections:
- NOISE GATE: Adjusts the threshold of the Noise Gate.
- TYPE: Selects one of 9 preamp models.
- GAIN: Adjusts the amp gain.
- TREBLE: Adjusts the amp's treble frequencies.
- MIDDLE: Adjusts the amp's mid frequencies.
- BASS: Adjusts the amp's bass frequencies.
- VOLUME: Adjusts the amp's volume.
- MOD FX: Adjusts Modulation effect parameters, offering 3 types of Modulation.
- MOD SPEED: Adjusts the speed of Modulation.
- DLY MIX: Adjusts the dry/wet ratio of Delay, offering 3 types of Delay.
- DLY TIME: Adjusts the delay feedback time.
- RVB DECAY: Adjusts the duration of Reverb Echo, offering 3 types of Reverb.
- RVB MIX: Adjusts the dry/wet ratio of Reverb.
- IR CAB: Selects the Impulse Response cabinet simulation.
- MASTER: Controls the overall output volume. The MASTER light is on except when the Tuner is active.
- BT Indicator.
- Display Screen: Shows BANK number (1-9), note name in TUNER mode, and "U" for low battery.
- A Footswitch: Toggles A-Preset (PRESET mode) or REVERB module (LIVE mode) on/off.
- B Footswitch: Toggles B-Preset (PRESET mode) or DELAY module (LIVE mode) on/off.
- C Footswitch: Toggles C-Preset (PRESET mode) or MOD module (LIVE mode) on/off.
- D Footswitch: Toggles D-Preset (PRESET mode) or AMP module (LIVE mode) on/off.
- Connect to studio gear, mixer, PA, or FRFR speaker using a balanced XLR cable.
V. Effectors Module
Note: Ensure TANK-G is in LIVE mode to audition effect modules.
1. NOISE GATE Module
- NOISE GATE Knob: Adjusts the threshold of the NOISE GATE.
2. AMP Module
The TYPE knob selects one of 9 amp models:
| SLOT | NAME | TYPE |
|---|---|---|
| 1 | Based on VOX AC30HW Normal | Clean |
| 2 | Based on Fender 65 Twin Reverb | Clean |
| 3 | Based on Bogner Shiva | Overdrive |
| 4 | Based on Marshall JTM45 OD | Overdrive |
| 5 | Based on Plexi 100 | Overdrive |
| 6 | Based on Marshall JCM800 | Dist |
| 7 | Based on EVH 5150 LEAD | Dist |
| 8 | Based on ENGL Powerball E645/2 | Dist |
| 9 | Based on Mesa Boogie Dual Rectifier | Dist |
Note: Brand and model names are trademarks of their respective owners and are used solely to identify sound character.
3. MOD Module
- MOD SPEED Knob: Adjusts the speed of Modulation.
- MOD FX Knob: Adjusts Modulation effect parameters. It offers 3 processes: CHORUS (MIX), PHASER (DEPTH), and TREMOLO (MIX). Turning the knob to the middle of any two processes turns off the module.
4. DELAY Module
- DLY TIME Knob: Adjusts the delay time.
- DLY MIX Knob: Adjusts the dry/wet ratio of Delay. It offers 3 processes: ANALOG, TAPE, and DUAL delay. Turning the knob to the middle of any two processes turns off the module.
5. REVERB Module
- RVB MIX Knob: Adjusts the dry/wet ratio of Reverb.
- RVB DECAY Knob: Adjusts the duration of Reverb Echo. It offers 3 processes: ROOM, SPRING, and CLOUD reverb. Turning the knob to the middle of any two processes turns off the module.
6. IR CAB Module
- IR CAB Knob: Selects the Impulse Response (IR) cabinet simulation. Slot 0 turns off IR CAB. Slots 1-8 offer 8 different cabinet types. Users can import custom IR files via computer software or the LEKATO APP.
7. TUNER Function
- Hold the B+C footswitches for 2 seconds to enter TUNER mode (guitar output is muted). Tap B+C again to exit.
- Displays note names during tuning. '#' is indicated by a dot. Knob lights indicate pitch: green for in-tune, left red for flat, right red for sharp.
8. BT Function
- Press and hold B+C footswitches for 3 seconds to turn BT on/off.
- Indicator status: Off (off), slow flashing (pairing/not connected), solid on (connected).
9. Mobile Phone Recording
- Use the included cable to connect TANK-G to your phone/tablet for high-quality recording.
VI. PRESET/LIVE Mode
The TANK-G has two modes: PRESET (default) and LIVE. Toggle between modes by pressing the B+C footswitches.
A. PRESET Mode Function Introduction
In PRESET mode, use BANK +/- to select a bank (1-9), then use A, B, C, or D footswitches to select one of the 4 presets within that bank. The indicator lights show which effects are active. If no presets are active, the unit is in BYPASS mode.
To save a preset: Select the desired preset, press BANK +/- to choose the target bank, then press and hold the desired A/B/C/D footswitch to copy and paste the preset. The footswitch light will blink to confirm saving.
B. LIVE Mode Function Introduction
LIVE mode allows for real-time editing and fine-tuning of presets. When switching to LIVE mode, the current knob settings are retained. Adjust parameters using the knobs, then use BANK +/- to select a bank and A/B/C/D footswitches to save the changes. The footswitch lights will blink to confirm saving.
LIVE mode also allows for custom effect chains. Manually turn off all effect modules, then turn on the desired modules. The knob settings directly reflect the sound.
Knob lights indicate status: Off (effect off), Solid On (effect on, parameter matches display), Flashing (effect on, parameter does not match display; adjustment overwrites saved data).
Footswitch lights indicate status: Off (module off), Flashing (module on).
VII. Technical Parameters
| Parameter | Specification |
|---|---|
| Input | Standard 1/4" MONO/TS |
| Output | Standard 1/4" MONO/TS, 1/8" Stereo, XLR Balanced, Phone Recording |
| Sample Rate | 44.1KHz/24bit |
| Size | 310(L) x 65(W) x 40(H) mm |
| Weight | 613g |
| Power Supply & USB Data Transmit | Type-C, 5V≥300mA |
| Battery Capacity | 3000mAh |
| Current Draw | 200mA |
| Attachment | User manual, USB cable, recording cable |
VIII. Software Download
Download the M-EFCS software for mobile (Android/iOS) and PC from: https://lekatotech.com/
FCC Warning
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
