Konftel 70 Speakerphone

About This Guide

Thank you for purchasing a KONFTEL product. We recommend reading this user guide in its entirety in order to maximize the performance and service life of this product. This product is intended for commercial use and should be installed by authorized personnel only.

Introducing the Konftel 70 Speakerphone

The Konftel 70 Speakerphone is an interactive phone designed to be used in commercial environments, and includes the following features:

If required, please ask for detailed specifications.

Important Notice

Konftel 70 FCC-ID: SNNKT70 IC: 2408A-KT70

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
3. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Important Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

[French version]

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

• (1) l'appareil ne doit pas produire de brouillage;
• (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Copyright © 2020 Konftel AB All rights reserved.

All intellectual property rights in this publication are owned by Konftel AB and protected by applicable copyright laws and international treaty provisions. Konftel AB retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Konftel AB.

All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.

Konftel AB reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that Konftel AB shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use.

This device complies with CE and FCC regulations. [CE-certified] [FCC-certified]

Safety and Warning Information

NOTE This mark is applied to indicate that the equipment conforms to European safety and electro-magnetic compatibility standards. [CE-certified]

Main Supply: This equipment is designed to operate from a 100-240 Volt, 50/60Hz AC power supply. The use of other power sources may damage this equipment. Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100-240V.

Main Adaptor: The supplied power adaptor is compatible with a standard main socket.

WARNING! The manufacturer will NOT accept responsibility or damage or injury caused by connecting to the wrong voltage.

If the power adaptor or lead gets damaged, it must be replaced by a qualified service agent with an approved adaptor of the same type and rating.

WARNINGS! The main plug shall be the main disconnect device and shall remain operable at all times.

Dangerous voltage constituting a risk of electric shock is present inside this equipment. ⚡️ [Electric Shock Hazard]

WARNINGS!

• Do not expose this product to moisture or place any objects filled with liquids on or near the product. ? [Moisture Hazard]
• Do not push objects into holes and ventilation slots. ? [Object Insertion Hazard]
• Do not store or operate the device in environments where the temperature is above 50 degrees Celsius or below -10 degrees Celsius. ?️ [Temperature Hazard]
• Do not place a naked flame source, such as lighted candles, on or near this product. ? [Fire Hazard]
• Do not intentionally hit the device or place heavy or sharp objects on the device. ? [Impact Hazard]

Only use accessories specified by the manufacturer. ✅ [Use Specified Accessories]

Keep the device away from benzene, diluents, and other chemicals. ☣️ [Chemical Hazard]

Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs. ?️ [Professional Repair Recommended]

Package Contents

The package contains the following items:

• Konftel 70 Device: The main speakerphone unit. [Speakerphone Unit]
• Power Adapter: An AC power adapter for connecting to a wall socket. [Power Adapter]
• MicroUSB cable: A cable for data transfer or charging. [MicroUSB Cable]
• Quick Guide: A brief introductory guide to the product. [Quick Guide]

KONFTEL 70 Collaboration Unit Exterior Components

The exterior of the Konftel 70 unit features several components:

Diagram Description: A top-down view of the Konftel 70 unit shows a triangular shape with rounded corners. Numbered indicators point to various components. A second diagram shows the underside with more numbered connection points.

Use Cases

USB Connectivity: The speakerphone can be connected to a laptop via a USB cable for audio and data transfer.

Bluetooth® Connectivity: The speakerphone can connect wirelessly to mobile devices and laptops via Bluetooth.

Bluetooth® Instructions

To be able to connect the Avaya B129 to your mobile device, they will first have to be paired. Pairing is only required when connecting for the first time. After that, you may simply reconnect.

Pairing

1. Press the Bluetooth® (*) button for two seconds.
2. Start a search for Bluetooth® devices on your mobile device.
3. Select Avaya B129 in the list of found devices. Pairing will be completed within a few seconds.

Reconnect

1. Make sure Bluetooth® is enabled on your mobile device. Press the Bluetooth® (*) button on the Avaya B129 once. Reconnection will be completed within a few seconds.

Note: Pairing and reconnecting can also be achieved using NFC. Simply tap your NFC-compliant device on the Avaya B129 NFC-tag.

Additional Assistance

For additional assistance, visit www.Konftel.com.