TRIO 620010442 Irvine Ceiling Light
Brand: TRIO Lighting
Product Overview
This document provides essential information for the TRIO 620010442 Irvine LED ceiling light. It details its features, operation modes, remote control setup, technical specifications, and safety guidelines. The light offers adjustable brightness and color temperature, controllable via a wall switch or a dedicated remote control.
Key Features
- Adjustable brightness and color temperature.
- Multiple lighting modes selectable via wall switch.
- Memory function retains last used settings.
- Dedicated night light mode.
- Energy Efficiency Class: F
- Ingress Protection: IP20
Operation
Without Remote Control (Wall Switch)
The light can be cycled through different modes by briefly turning the wall switch off and on. The last selected lighting scenario is remembered (memory effect). Settings are saved after 15 seconds. To maintain saved settings, ensure a minimum 5-second interval between switching operations.
Available modes via wall switch:
- 100% Cold White (6500K)
- 100% Warm White (3000K)
- 100% Brightness (4000K)
- Night Light
With Remote Control
The remote control provides precise adjustment of brightness and color temperature, along with mode selection.
1. ON: Powers the light on.
2. OFF: Powers the light off.
3 & 4. LM I (Brightness): Adjusts brightness. Short press cycles through steps; long press reaches maximum or minimum brightness.
5 & 6. CCT I (Color Temperature): Adjusts color temperature. Short press cycles through steps; long press reaches warmest or coldest color setting.
7. Mode: Cycles through lighting modes (100% Cold White 6500K, 100% Warm White 3000K, 100% Brightness 4000K, Night Light).
8. Night Light: Activates the night light mode.
The remote control also remembers the last configured light settings.
Remote Control Setup & Pairing
To pair the remote control with the light:
- Disconnect the light from the power supply for 10 seconds.
- Turn the light on using the wall switch.
- Simultaneously press the "ON" button on the remote control.
- The light will blink several times after approximately 4 seconds to confirm successful pairing.
To unpair the remote control, repeat the process but press the "OFF" button instead of "ON".
Technical Specifications
- Model: 6200104XX / 620010442
- Power Input: 230V~50Hz
- Light Source: LED
- Maximum Power: 60W
- Remote Frequency: 2.4GHz
- Remote Battery: 2 x AAA 1.5V
Safety Information
WARNING: Before assembly, please read the safety instructions carefully.
Compliance & Manufacturer
This product complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.trio-lighting.com
Manufacturer: TRIO Leuchten GmbH, Gut Nierhof 17, D-59757 Arnsberg, Germany.
Origin: Developed in Germany by, Made in PRC.
[House Symbol] [Lightbulb Symbol] [Warning Symbol] [Recycle Symbol] [CE Marking]