DIGITUS Wireless HDMI Extender Set, 50 m

1. Introduction

With the Wireless HDMI Extender Set, you can wirelessly transmit HDMI video and audio signals in Full HD over a distance of up to 50 m with an unobstructed view. Operation and installation are super simple. Real Plug & Play - Just plug in and get started. The transmitter and receiver can be supplied with power via your device's HDMI connection (0.5A required), or alternatively (additionally) with the enclosed Micro USB cable via the USB connection of your notebook, PC, etc. Thanks to the compact design of the transmitter and receiver, installation is easy, quick and can be customized - the perfect solution for meeting and conference rooms. It can also be used in private applications for spontaneous or temporary installations.

2. Main Features

• Wireless HDMI signal transmission up to 50 m (with unobstructed view)
• Point-to-point connection - 1x Transmitter (source) + 1x Receiver (output device)
• Supports resolutions up to Full HD (1080p / 60 Hz)
• Easy operation and handling thanks to Plug & Play - Just plug in and get started
• Power supply via Micro-USB
• Transmitter and receiver can be supplied with power via your device's HDMI connection (> 500 mA required). To have a safe and stable operation, it is recommended to always use the Micro USB cable for power supply of TX and RX.
• AES 128 bit encryption
• WPA2 protocol
• The set is ideal for subsequent, spontaneous, or temporary installations in meeting and conference rooms.

3. Package Contents

• 1x Transmitter unit
• 1x Receiver unit
• 2x Micro USB cable (80 cm)
• 2x HDMI extension cable (15 cm)
• 1x QIG (Quick Installation Guide)

4. Product Features

5. Product Specification

Transmitter

Receiver

6. Overview

6.1 Transmitter Unit

Remark: If the source device has a HDMI with 5V power output, then there is no need to connect a USB cable for power.

LED indicator of the Transmitter Unit

6.2 Receiver Unit

LED indicator of the Receiver Unit

7. Installation

Receiver Installation

• Connect the Receiver Unit HDMI with the big screen TV or projector's HDMI port.
• Connect the USB port of the Receiver Unit to the USB port of the TV through a USB cable for power supply.

Transmitter Installation

• Connect the Transmitter Unit HDMI to PC HDMI port.

Remark: If the source devices HDMI has 5V power output, then no need to connect a USB cable for power. If not, please connect the Transmitter Unit with PC by USB cable for power. To have a safe and stable operation, it is recommended to always use the Micro USB cable for power supply of TX and RX.

• The LED indicator of the Transmitter Unit will turn red when it's booting up.
• The LED indicator will become constant blue when the Transmitter Unit and Receiver Unit are connected.

8. Pairing Transmitter and Receiver

A set of the Wireless HDMI Extender Set includes one receiver and one transmitter, which are paired before shipment. Normally, you don't need to pair them again thanks to the auto-pair feature.

However, if you need to re-pair, you need to follow the instructions below to pair the transmitter with the receiver:

1. Power on the receiver and connect with display.
2. Power on the transmitter until the LED turns to flashing red. Then press the button up to 5 seconds until the LED becomes fast flashing red; this means the transmitter unit is in factory reset mode.
3. Wait around 15 seconds; the button light of the Transmitter Unit will turn to constant blue from red, and the "pair successful" message will be displayed on the Receiver Unit screen.

Frequency Range & Maximum Transmit Power

WiFi Standard: 802.11b/g/n/ac 5G WiFi

Channel: 36, 40

Core Frequency: 5180, 5200

Range: 5170 ~ 5210MHz

Bandwidth: 20/40MHz

Transmitter power: 13dBm max

SW version: RX: v2.65, TX: v2.3.8

HW version: TX: S100TX-LC01-01, RX: S100RX-LC01-01

Important safety instructions

Please read the following safety instructions carefully before installation and operation:

1. Observe all warnings and instructions concerning this device.
2. Do not expose the device to rain, moisture, vapors, or liquids.
3. Do not insert any objects into the device.
4. Do not attempt to repair the unit yourself or open the cabinet. Risk of electric shock!
5. Ensure adequate ventilation to prevent damage due to overheating.
6. Turn off the power supply and make sure the environment is safe before installation.
7. In the event of thunderstorms, there is a risk of lightning strike and damage to connected electrical equipment due to overvoltage.
8. Do not install this device during a thunderstorm.
9. Disconnect the device from the connected electrical appliances during a thunderstorm.
10. Use the device inside buildings only.
11. Return the device to your dealer in case of repair.
12. Dust, moisture, vapors, and strong cleaning agents or solvents can damage the device.
13. Disconnect the device from the power supply and the connected devices before cleaning.
14. Clean the device with a lint-free cloth.

Disclaimer

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Important manufacturer's instructions

• Only use the short HDMI extension cables supplied if necessary.
• The use of other or longer HDMI extension cables could lead to a change in the device properties with regard to electromagnetic compatibility (EMC). In this case, the end user is responsible for compliance with legal requirements.

Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.

info@assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

CE [Compliance Mark]
[WEEE Symbol - Crossed-out wheelie bin]