Technical Data
| Model | VT-10160 |
|---|---|
| SKU | 11566 |
| Solar Panel Watts | 160W (-5%, +10%) |
| Folding Method | 1*4 fold |
| Folded Size | 680*468*54±5mm (with junction box) ±3mm |
| Expanded Size | 1670*680*25±5mm (with junction box) ±3mm |
| Weight | 9Kg ± 0.5 Kg |
| Operation Temperature | -20°C to 60°C |
| Surface Material | ETFE (a fluorine-containing plastic film, specially designed for anti-UV, not easy to age, long service life, good dustproof ability.) |
| WEEE Number | 80133970 |
| IP Rating | IP67 |
| Warranty | 2 Year |
Introduction & Warranty
Thank you for selecting and purchasing a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any further queries, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
Warnings
WARNING!
- Please ensure power is turned off before starting installation. [power-off]
- Installation must be performed by a qualified electrician.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard. ⚠️
- This product cannot be in contact with strong corrosive substances.
- Avoid hitting and scratching the surface with hard objects during use.
- Cannot withstand bending stress during transportation and assembly.
This marking indicates that this product should not be disposed of with other household wastes. ♻️
Caution, risk of electric shock. ⚡
Packaging Contents
- Protective Case
- Solar Panel
- User Manual
Installation Guide
-
Step 1: Small solar panel setup.
Place the solar panel on a stable, flat surface.
-
Step 2: Open the kickstands.
Deploy the integrated kickstands on the back of the panel to prop it up at an optimal angle towards the sun.
-
Step 3: Face the sun.
Position the solar panel to directly face the sun for maximum energy absorption.
-
Step 4: Connect the charging cable.
Connect the appropriate charging cable (e.g., MC4 connector, sold separately) from the solar panel's junction box to your power station or device.
Charging for Power Station
Connect the solar panel(s) to your power station using the provided cables and connectors (MC4 connectors sold separately). Ensure correct polarity (+/-) when making connections.
Example Connection 1:
☀️ Solar Panel + MC4 Connector → Power Station
Example Connection 2:
☀️ Solar Panel + MC4 Connector → Power Station
Note: Multiple solar panels can be connected in series or parallel depending on the power station's requirements and the panel's specifications.
Electrical Performance Parameters
Parameters measured under standard light intensity conditions.
| No. | Performance | Standard Parameter | Minimum Parameter |
|---|---|---|---|
| 1 | MC4 Output power (W) | 112 | ≥106.4 |
| 2 | MC4 Output voltage (V) | 17.6 | ≥16.72 |
| 3 | MC4 Output current (A) | 6.36 | ≥4.71 |
| 4 | MC4 Open circuit voltage (V) | 21.2 | ≥22.8 |
| 5 | MC4 Short circuit current (A) | 6.83 | ≥4.97 |
Cell Type: Monocrystalline silicon cell (182*182mm, conversion efficiency of cell is 22.6%)
Certifications and Contact Information
For any query/issue with the product, please reach out to us at: SUPPORT@V-TAC.EU
For more product range, please contact your distributor or nearest dealers.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
