Qlima Wi-Fi Connect User Manual

This description is applied to appliance with Wi-Fi function. Please read the manual carefully before using the product and keep it for future reference.

Note: Only for portable appliance

Let's get start!

Operation guideline. Please take below simple guideline instruction as reference.

Operation Steps	Operation Items	New Account	Re-install APP (registered before)
Step 1	Download and Install APP	YES	YES
Step 2	Registration Account	YES	NO
Step 3	Login	YES	YES
Step 4	Add Device to control	YES	Registered Device will remain.

If the appliance have the Wi-Fi function, the transmission power: less than 20dBm, and the radio frequency range is: 2412MHz-2472MHz.
The appliance is compliant with the RE Directive (2014/53/EU).

Wi-Fi Module Specification and Basic Information

1. Minimum specifications on a Smart phone:

Android 5.0 version or higher
iOS 10.0 version or higher

2. Basic parameters for Wi-Fi:

Parameters	Details
Network frequency	2.400 - 2.500GHz
Standards of WLAN	IEEE 802.11 b/g/n (channels 1-14)
Protocol stack support	IPv4/IPv6/TCP/UDP/HTTPS/TLS/Multicast DNS
Security support	WEP/WPA/WPA2/AES128
Network type support	STA/AP/STA+AP

3. Wi-Fi module reset method

On control panel, please press the “FAN” button 6 times within 4 seconds.

[Image: Hand pressing a button labeled 'FAN' on a control panel with radiating lines indicating Wi-Fi signal]

Download and Install the App

Method 1: Scan QR Code

Please scan the QR code with a browser scanner, download and install the APP.

[Image: QR code for app download]

Method 2: Manual Search

For Android smart phone, open the Google "Play Store" on your smart phone and search "SmartLife-SmartLiving", download and install the APP.

[Image: Google Play Store icon]

For iOS smart phone, open the Apple "App Store" on your smart phone and search "SmartLife-SmartLiving", download and install the APP.

[Image: Apple App Store icon]

Alternatively, you could also download the “TUYA Smart" application which is also compatible, but has some slight differences in the layout and functions. Please enable the permissions of Storage/Location/Camera for this APP when installing. Otherwise it will have some problems when operating.

Registration

1. If you don't have any account please tap button "Sign Up".

2. Read the Privacy Policy and tap "Agree".

[Image: App screen showing 'User Agreement and Privacy Policy' with 'Disagree' and 'Agree' buttons, and a login screen with 'Log In', 'Sign Up', and 'Try now' options]

3. Tap " > " and choose the country.

[Image: App screen showing country selection with a search bar and a list of countries]

4. Enter your E-mail address.

5. Tap the button "Get verification code".

[Image: App screen for registration with fields for country, email address, and a 'Get Verification Code' button]

6. Enter the verification code you received from E-mail.

7. Set the Password with 6-20 characters including characters and numbers.

8. Tap "Done".

[Image: App screens for entering verification code and setting password]

Log in

1. If you already have account, tap "Log in”.

2. Enter your registered account and password.

3. Tap "Log in” button.

[Image: App login screen]

Forgot the password

If you forgot the password or you want to reset the password, operate as below:

Tap "Forgot password".
Enter your account (E-mail address) and tap button "Get verification code”.
Enter the verification code received by your E-mail.
Set the new password and tap button "Done".

[Image: App screens for login, forgot password, enter verification code, and set password]

Add device

There are 2 methods to add the device.

1-CF Mode

1.1 Click "+" in the upper right corner of the “Home” screen or tap "Add device” on the room which has no device.

[Image: App home screen with a '+' icon and 'Add Device' button]

1.2 Tap the "Large home appliances" logo.

1.3 Tap the "Air conditioner(Wi-Fi)” logo.

[Image: App screen showing categories of appliances, including 'Large Home Appliances' and 'Air Conditioning (Wi-Fi)']

1.4 Input the password of the Wi-Fi which the same as your smart phone connected, then tap "Next".

[Image: App screen to select Wi-Fi network and enter password]

1.5 Power on the appliances, no need to launch the appliances. Press the "FAN" button on the control panel 6 times within 4 seconds, until the LED screen show “CF”, which can make Wi-Fi reset, there will be switch between “CF” and “AP” if press many times.

1.6 Follow the comments on the next screen to reset the Wi-Fi module, then check "Confirm the device is reset" and tap “Next”.

[Image: App screen for resetting the device, with options for EZ Mode and AP Mode]

Note: On top of the appliance, press the “FAN” button 6 times within 4 seconds, until the screen display “CF”.

1.7 You can see the percent rate of connecting process, at the same time “PP”, “SA”, “AP” shining in turn on the appliances display.

"PP" means "Searching the router".
"SA" means "connected to the router".
"AP" means "connected to the server".

[Image: App screens showing connection progress ('Adding device...') and successful device addition]

[Image: App interface for controlling a portable air conditioner, showing 'Power Off' and control options like Mode, Fan, Function, Timer]

2-AP Mode

2.1 Power on the indoor unit, no need to launch the appliance.

2.2 Click "+" in the upper right corner of the "Home" screen or tap "Add device” on the room which has no device.

[Image: App home screen with a '+' icon and 'Add Device' button]

2.3 Tap the "Large Home Appliances" logo and the "Air conditioner(Wi-Fi)" logo.

[Image: App screen showing categories of appliances, including 'Large Home Appliances' and 'Air Conditioning (Wi-Fi)']

2.4 Tap in the upper right corner and choose "AP Mode" then follow the comments on the screen to reset the Wi-Fi module then check "Confirm the device is reset" and tap "Next".

[Image: App screen showing mode selection (EZ Mode, AP Mode) and device reset confirmation]

Note: On top of the appliance, press the “FAN” button 6 times within 4 seconds, until the the screen display “AP”.

2.5 Read the instruction carefully and tap "Connect now”.

2.6 In the network setting screen, select “SmartLife-****”, and tap it to connect.

[Image: App Wi-Fi network selection screen showing available networks and connection options]

2.7 You can see the percent rate of connecting process, at the same time "PP", “SA”, “AP” shining in turn on the appliances display.

"PP" means "Searching the router".
"SA" means "connected to the router".
"AP" means "connected to the server".