VALENCIA NO2F Nightstand Assembly Instructions

General Information

Estimated Assembly Time: Approximately 20 minutes for professionally trained persons.

General Advice: Before starting assembly, please read the instructions carefully. Assemble on a clean, soft surface (e.g., cardboard, fabric) to avoid damaging the elements. For warranty claims, refer to the element codes provided in the manual.

Parts List

Assembly Instructions

1. Step 1-4: Base and Frame Construction

   Assemble the base and side panels. Use screws (E, F) and dowels (E, C) to connect panels A, B, and C. Rotate the assembly by 180 degrees as indicated.

2. Step 5-6: Attaching Base to Main Structure

   Attach panel A (x2) using dowels Ø8x30 (A) to the assembled frame. Secure the structure with screws D (4x30).

3. Step 7-10: Assembling the Main Cabinet Box

   Connect the side panels (37439) to the back panel (38269) and front panel (37439). Attach the top panel (38270). Secure the main frame with screws D (4x30) and H (x4).

4. Step 11-13: Preparing Drawer Slides

   Prepare the drawer slides by attaching components I (x2) and A (x2) to the drawer side panels using screws Ø15/10 (I) and Ø8x30 (A).

5. Step 14-15: Assembling Drawer Boxes

   Assemble the drawer boxes using panels 37063, C, and L, secured with screws C (x4) and L (x4). Attach drawer fronts using screws J (4x35).

6. Step 16-18: Completing Drawer Assembly and Attaching Slides

   Insert drawer components 36537 (x2) into the drawer boxes. Complete the drawer assembly with part 37063 (x2). Attach drawer slides using parts P (x2), Q (x4), and K (x4).

7. Step 19-20: Attaching Frame Components and Final Slides

   Attach parts G (x8) to the main frame. Attach drawer slides N (x4) and O (x8) to the frame using screws R (x4).

8. Step 21: Inserting Drawers

   Insert the assembled drawers into the main unit. Ensure smooth operation. Note the maximum weight capacity of 2 kg per drawer. Check for proper alignment and stability.

Care and Safety Information

General Care

• Assemble on a clean, soft surface (cardboard, fabric) to prevent damage.
• Avoid placing hot objects or candles directly on the furniture.
• Wipe up spills immediately.
• Regularly check that screws and fittings are tight.
• The natural aroma of wood is a sign of quality. Natural resin may cause bright spots on knots, which can be polished with a dry, lint-free cloth.
• Initial faint odors from wood, paint, leather, or upholstery materials are normal and will dissipate over time. Frequent ventilation or wiping with a damp cloth (water with a little vinegar) can help speed this up.

Wood Furniture Care

• For natural wood furniture, use a dry, soft cloth and non-abrasive cleaning agents.
• For oiled/waxed finishes, occasional re-oiling with suitable furniture oil is recommended. Wipe off excess oil with a lint-free cloth and allow it to dry.
• For untreated/painted wood, use a moderately damp cloth. Avoid corrosive cleaners, solvents, or polishes.

Panel Material Furniture Care

• Use a soft, lint-free cloth or chamois. Wipe surfaces with a slightly damp cloth.

General Cleaning Precautions

• Do not use microfiber cloths, dirt erasers, abrasive cleaners, solvents, scouring powder, steel wool, scouring pads, vacuum cleaner nozzles/brushes directly on surfaces, or steam cleaners, as these can cause scratches, damage, or separation of materials.

Safety Warnings

• Risk of injury if used improperly. Assembly should be performed by trained personnel.
• Furniture MUST be secured to the wall to prevent tipping. Check wall type and load-bearing capacity.
• Handle glass elements with extra care to avoid injury from breakage.
• Products with built-in mechanisms or flexible designs require extra caution to prevent pinching of hands or fingers.
• Do not expose products to high temperatures, direct heat sources, or open flames to prevent damage, ignition, or fire.
• Keep small parts out of reach of children to prevent ingestion or choking.
• Be extra cautious with products that have sharp edges, especially around children.