Baby Playpen & Activity Center

For children indoors and outdoors

A visual representation of the MyBabiie baby playpen, a rectangular structure with padded grey top rails and a light grey fabric enclosure. It features an arched doorway on one side and stands on small grey feet.

IMPORTANT! KEEP FOR FUTURE REFERENCE AND READ CAREFULLY

WARNING

Read the operating instructions carefully before installing and using the playpen:

Suitable age: birth to 15 kg (approx 3 yrs)
Size: 1.8 x 1.5 x 0.625 metres (L * W * H)
The assembly should only be completed by adults.
Please put it on a flat, neat floor.
Please use under adult supervision.
Climbing on the playpen is prohibited.
Keep away from sources of fire.
Please put it in a place with good lighting.
Do not put it in water or on permeable ground.
Do not use it upside down.
Before use, check that all parts are tightened.
Please clean the playpen regularly with a mild cleaning agent so that your baby can play in a clean and hygienic environment.
If after the installation there are additional parts, check the installation steps again.

LIST OF ITEMS

Components	Number	Length (mm)	Image display
Pipe (900mm)	8	900	[900mm Pipe]
Tube (750mm)	8	750	[750mm Tube]
Tube (620mm)	8	620	[620mm Tube]
Teeing point	4		[Teeing Point]
Suction cup tapping point	4		[Suction Cup Connector]
T-tee	8		[T-Connector]

An illustration showing the MyBabiie playpen assembled, with dimensions indicated: 180cm length, 150cm width, and 68cm height. Numbered components are shown: 1. Tube (900mm), 2. Tube (750mm), 3. Tube (620mm), 4. T-tapping point, 5. Tapping point, 6. Suction cup tapping point. The diagram also shows the base frame with dimensions 180cm and 150cm, and the side frame with dimension 68cm.

SETTING UP YOUR PLAYPEN

Step 1: Base Assembly

Lay the play pen cover flat. Insert the metal pipe into the play pen cover. Connect the four-sided iron pipe with a T-shaped tee, and then connect the four corners to the suction cup tee.

The first setup step involves laying the playpen cover flat. The base frame is assembled by connecting four-sided iron pipes using T-shaped tees and connecting the corners to suction cup tees. The base frame dimensions shown are 75cm x 75cm and 90cm x 90cm.

Step 2: Vertical Structure

Insert the vertical tubes into the play pen cover and insert the T-shaped tee and the sucker tee to complete the joining of the middle of the play pen wall.

Vertical tubes are inserted into the playpen cover and connected to the base frame using T-shaped tees and suction cup tees to form the main structure. The height of the vertical tubes is indicated as 62cm.

Step 3: Top Rail Assembly

Insert the tees and T-shaped tees into the vertical tubes and then pass the tubes through the cloth sleeve to join the tees and the T-shaped tees to complete the joining of the top of the play pen handrail.

The top frame is constructed by inserting tees and T-shaped tees into the vertical tubes. Horizontal tubes are then passed through cloth sleeves to connect these tees, completing the top handrail of the playpen.

The playpen installation is now complete and ready to use.

The final diagram shows the fully assembled MyBabiie baby playpen, ready for use.

CARE & MAINTENANCE

Cleaning the playpen

Do not use any aggressive cleaning products; these may harm the construction material of the playpen. Wipe clean with a damp cloth and hang in shade on a line to dry.

The frame should be wiped dry and cleaned after use.

REGISTER YOUR PRODUCT

In the first instance of needing assistance please contact your original place of purchase.

This product qualifies for 12 month warranty when registered through our website.

	MyBabiie MB240 Pushchair User Manual and Safety Guide Comprehensive instructions for assembling, using, and maintaining the MyBabiie MB240 Pushchair. Includes safety guidelines, do's and don'ts, and warranty information.
	MyBabiie MB01 Stroller: User Manual and Safety Guide Comprehensive instructions and safety guidelines for the MyBabiie MB01 stroller, covering assembly, usage, care, and important warnings for parents.
	MyBabiie MB200i Travel System: User Manual and Safety Guide Comprehensive instructions and safety information for the MyBabiie MB200i Travel System, covering assembly, use, vehicle installation, care, and warranty. Includes detailed guides for the pushchair and infant carrier.