OKKO Sonic Bass Portable Bluetooth Speaker User Guide

Introduction

The OKKO Sonic Bass is designed to enhance any occasion with its powerful sound and vibrant LED lights. This Bluetooth-enabled speaker is versatile, suitable for various environments such as outdoor gatherings, construction sites, and karaoke sessions. It delivers crystal-clear HD sound and features a wired microphone for interactive singing experiences.

Features

• Dual 5W speakers with colorful LED lighting.
• Five media modes with an easy-to-read digital display.
• Up to 10 hours of playback time on a full charge.
• Bluetooth 5.1 compatibility for wireless connectivity.
• Integrated pull-up handle and wheels for portability.
• Includes a wired microphone for karaoke functionality.

What's Included

• Sonic Bass Speaker
• USB-C Charging Cable
• Wired Microphone
• User Guide

Charging the Speaker

The Sonic Bass speaker is equipped with an internal rechargeable battery. For optimal performance, fully charge the battery before the first use.

• Connect one end of the provided USB-C charging cable to the speaker's charging port (9) and the other end to a USB power source.
• A red LED indicator light will illuminate while charging.
• The LED indicator light will turn off once the speaker is fully charged.
• Charging time is approximately 5-6 hours.

Note: The speaker will emit a low power alarm when the battery is low and will automatically shut down if the battery level becomes critically low.

Pairing Devices to the Speaker

Ensure your device has Bluetooth functionality enabled. Pairing procedures may vary by device.

• Press and hold the Power button (1) to turn the speaker ON. The speaker will automatically enter Bluetooth pairing mode.
• Keep your device within 3 feet (approx. 1 meter) of the speaker for the initial pairing process.
• Activate the Bluetooth function on your device.
• Search for and select "OKKO Sonic Bass" from the list of available Bluetooth devices. Follow the on-screen prompts to complete the pairing.
• Upon successful pairing, a voice prompt will confirm "Bluetooth Connected."

Note: To disconnect a paired device, press and hold the Play/Pause button (6) for 3 seconds. The speaker can then be paired with a different device.

Note: Once devices are successfully paired, they will remember each other, eliminating the need for re-pairing on subsequent uses.

How to Play Music using a USB or MicroSD Card

The speaker automatically detects and enters USB or MicroSD mode when a compatible card is inserted.

• Load your USB drive or MicroSD card with songs in MP3 format.
• Insert the USB drive into the USB port (11) or the MicroSD card into the MicroSD port (13).
• Music playback will begin automatically.

How to Play Music via AUX Mode

The speaker automatically detects an AUX connection.

• Connect one end of a 3.5mm AUX cable to the speaker's AUX port (10) and the other end to an AUX-enabled mobile device, phone, or computer.
• The speaker will enter AUX Mode automatically.
• Press the Play/Pause button (6) to control playback.

How to Listen to FM Radio

The speaker includes an internal FM antenna.

• Press the Mode button (2) repeatedly until FM Mode is selected.
• The FM frequency range is 87.5 MHz to 108.0 MHz.
• To scan and store available stations, press and hold the Play/Pause button (6).
• Use the Previous (5) or Next Track (7) buttons to cycle through the saved FM stations.

How to Connect Two Speakers to Each Other via TWS

To enable True Wireless Stereo (TWS) pairing between two OKKO Sonic Bass speakers:

• Turn on both speakers.
• On each speaker, press the Power button (1) twice.
• A voice prompt will announce "TWS Pairing."
• Once successfully connected, a voice prompt will confirm "TWS Connected."

Controlling the Speaker's Lights

Manage the speaker's LED lighting effects:

• Press the Light button (3) to turn the RGB lights ON.
• Press the Light button (3) again to cycle through the available light modes.
• Press and hold the Light button (3) at any time to turn the lights OFF.

Specifications

Important Safeguards

• Use the unit only for its intended purpose.
• Keep the unit away from heat sources, direct sunlight, humidity, and liquids.
• Avoid exposing the unit to extremely high or low temperatures, which could damage the battery.
• Do not operate the unit if it is wet to prevent electric shock or damage.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs should only be performed by qualified electricians. Improper repairs can pose serious risks.
• Keep the unit out of reach of children; it is not a toy.
• Avoid listening to music at high volumes for extended periods to protect hearing.

Battery Disposal

This product contains a lithium-polymer battery. Lithium-polymer batteries are environmentally safe when fully discharged. Do not dispose of this product with household waste. It must be disposed of safely at a hazardous waste collection site, recycling facility, or an electronic retailer that recycles batteries. Consult local or state laws for specific disposal procedures.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Customer Support

For any questions or issues regarding the Sonic Bass Speaker, please contact tzumi Customer Support:

• Email: support@tzumi.com
• Phone: 1-855-GO-TZUMI