KC501 Key & Chip Programmer

KC501 Key & Chip Programmer is designed to read and write keys, generate dealer keys, read and write MCU / EEPROM chips, read and write remotes, and read and write Mercedes infrared keys. It is compatible with XTOOL tablets or PCs.

Device Overview

The KC501 features several ports and slots for its various functions:

1. DC Port: Provides 12V DC power supply.
2. USB Port: Provides data communication and 5V DC power supply (Type B USB port for device, PC, and KC501 connection).
3. DB 26-Pin Port: Connects with Mercedes Benz infrared cable, ECU cable, MCU cable, and MC9S12 cable.
4. Cross Signal Pins: Accommodates MCU board, MCU spare cable, or DIY signal interface for reading/writing MCU and ECU chips.
5. Locker: Secures the EEPROM component transponder slot for proper function. Used for placing EEPROM chips or sockets for data reading/writing.
6. EEPROM Component Transponder Slot: Holds EEPROM plug-in transponders or EEPROM sockets.
7. Status LED: Indicates the current operating status.
8. Display Screen: Shows remote frequency or transponder ID.
9. Remote Frequency Button: Press to display remote frequency on the screen.
10. Transponder ID Button: Press to display transponder ID on the screen.
11. Transponder Slot: Holds transponders for reading or writing transponder data.
12. Vehicle Key Slot: Holds vehicle keys for reading or writing key data.
13. Remote Control Transponder Induction Area: Used for reading and writing remote control transponder data.
14. Mercedes Infrared Key Slot: Holds Mercedes infrared keys for reading or writing key data.

Operation Steps

Bluetooth Device Operation Steps

Connect the VCI and main cable to the car's OBD port, typically located under the dashboard.
Turn on the XTOOL device and pair it via Bluetooth with the VCI.
Connect the XTOOL device and KC501 using a USB cable. Navigate to the immobilization menu and follow the on-device instructions.

Wire Device Operation Steps

Turn on the XTOOL device.
Connect the car's OBD port using the wire. The OBD port is usually under the dashboard.
Connect the XTOOL device and KC501 using a USB cable. Navigate to the immobilization menu and follow the on-device instructions.

PC Connection

The KC501 also supports connection to a PC for operation.

Contact Information

Shenzhen Xtooltech Co., Ltd

Company Address: 2nd Floor, Building No.2, Block 1, Excellence City, No.128, Zhongkang Road, Shangmeilin, Futian District, Shenzhen, China

Factory Address: 2/F, Building 12, Tangtou Third Industrial Zone, Shiyan Street, Baoan District, Shenzhen, China

Service Hotline: 0086-755-21670995 / 86267858

Email: marketing@xtooltech.com

Fax: 0755-83461644

Website: www.xtooltech.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Models: KC501, 2AW3I-KC501, 2AW3IKC501, KC501 Key and Chip Programmer, KC501, Key and Chip Programmer

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 3 Pages, 4.18MB

GetApplicationAttachment.html?id=4918831 Adobe Illustrator CS6 (Windows) Adobe PDF library 10.01

Related Documents

	XTOOL KC501 Key Programmer User Manual Comprehensive user manual for the XTOOL KC501 Key Programmer, detailing its functions, specifications, appearance, and upgrade procedures for automotive locksmiths.
	XTOOL X100MAX Auto Key Programmer User Manual Comprehensive user manual for the XTOOL X100MAX Auto Key Programmer, detailing its features, operation, key programming, diagnosis, and special functions for automotive maintenance by Shenzhen Xtooltech Intelligent Co., LTD.
	X2MBIR Module Programmer Quick Start Guide \| XTOOL Get started with the XTOOL X2MBIR Module Programmer. This guide covers product overview, connections, EEPROM/MCU reading/writing, and compliance information for automotive technicians.
	XTOOL X100MAX Auto Key Programmer User Manual: Features & Operation Guide Comprehensive user manual for the XTOOL X100MAX Auto Key Programmer. Learn about its diagnostic functions, special service procedures, key programming capabilities, and safe operation guidelines for automotive professionals and enthusiasts.
	XTOOL Automotive Diagnostic and Repair Tools Product Brochure Explore the comprehensive range of XTOOL automotive diagnostic and repair solutions, including advanced diagnostic systems, key programmers, key cutting machines, ADAS calibration tools, TPMS service, and OBD2 code readers designed for professional automotive workshops and technicians.
	Xtool HIDCONFIG Function List V5.40: BMW, Mazda, Ford Vehicle Compatibility Comprehensive HIDCONFIG function list (V5.40) from Xtool, detailing compatibility and specifications for BMW, Mazda, and Ford vehicle models, including chassis, engine, and displacement information for automotive diagnostics.
	Automotive ECU and Immobilizer Compatibility Reference List A comprehensive list of vehicle models, their associated Engine Control Units (ECUs), Immobilizers, Body Control Modules (BCMs), and other electronic components, along with specific chip types, for automotive diagnostic and programming purposes.
	xTool M1 User Guide: Operate Laser Engraver with xTool Creative Space (XCS) Learn to use the xTool M1 10W laser engraver and cutter with this comprehensive guide. Covers XCS software setup, device connection, material preparation, design import, and project processing for wood, metal, and acrylic.