X2MBIR Module Programmer

Quick Start Guide

Disclaimer

Please read this manual carefully before using the X2Prog Module Programmer (hereinafter referred to as X2Prog). Shenzhen Xtooltech Intelligent Co., Ltd. (hereinafter referred to as "Xtooltech") does not assume any liability in case of misuse of the product. Illustrations are for reference only, and this user manual is subject to change without prior notice.

Product Description

The X2Prog is a Module Programmer designed to read, write, and modify EEPROM and MCU chip data via the BOOT method. It is suitable for professional vehicle tuners and mechanics, offering functionalities such as module cloning, modification, or replacement for ECUs, BCMs, BMS, dashboards, and other automotive modules. The X2Prog is also compatible with other expansion modules from Xtooltech, enabling advanced functions like BENCH programming and transponder coding.

Product View

The X2Prog device features several key components:

① DB26 Port: Used for connecting cables or wiring harnesses.
② Indicators:
- 5V (Red / Left): Indicates 5V power input.
- Communication (Green / Middle): Flashes during device communication.
- 12V (Red / Right): Indicates 12V power input.
③ ④ Expansion Ports: Used for connecting other expansion modules (e.g., 32/48PIN).
⑤ 12V DC Power Port: Connects to a 12V power supply when needed.
USB Type-C Port: Connects to XTool devices or a PC.
Nameplate: Displays product information.

Visual representation of the device shows its front, side, top, and back views, highlighting the ports and indicators.

Device Requirements

XTool Devices: APP version V5.0.0 or higher.
PC: Windows 7 or higher, with 2GB RAM.

Device Connection

The X2Prog can be connected in two primary ways:

Connect to XTool device: The X2Prog connects to an XTool diagnostic device (e.g., a tablet or display) via a cable.
Connect to PC: The X2Prog connects to a computer via a USB Type-C cable.

Expansion & Cable Connection

The X2Prog supports various expansion modules and cables for enhanced functionality. To install expansion modules, connect them directly to the X2Prog using the expansion ports (32/48PIN) or the DB26 port. Multiple modules can be connected simultaneously. The specific modules required depend on the operation being performed.

Diagrams illustrate connections between the X2Prog, Expansion A, Expansion B, and Cable C, showing how these components interface.

How to Read & Write EEPROM

EEPROM data can be accessed using different methods:

Via EEPROM Board:
This method requires the EEPROM chip to be removed from the ECU and soldered onto the dedicated EEPROM board, which is typically included in the X2Prog standard pack. The EEPROM board is then connected to the X2Prog.
Diagram: Shows an EEPROM chip desoldered from an ECU, soldered onto an EEPROM board, and connected to the X2Prog.
Via other expansion modules:
Alternative methods involve using specific expansion modules. Users should refer to the diagrams provided within the XTool application for detailed connection instructions for various chips and modules.
Diagram: Illustrates an EEPROM chip on a board connected to the X2Prog via an expansion module.

How to Read & Write MCUs

MCU data can be accessed using the following methods:

BOOT Method:
For this method, a wiring harness must be soldered to the ECU board according to the specific wiring diagram. A 12V power supply must also be connected to the X2Prog.
Diagram: Shows an ECU with a soldered wiring harness connected to the X2Prog, powered by a 12V supply.
BENCH Expansion Method:
In this method, the wiring harness is plugged directly into the ECU port as per the wiring diagram. A 12V power supply is required for the X2Prog.
Diagram: Shows an ECU connected via a plug-in wiring harness to the X2Prog, powered by a 12V supply.

Compliance Information

FCC Compliance

FCC ID: 2AW3IM604

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct it by reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

RF Exposure Warning: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and the body.

Responsible Party:

Company name: TianHeng Consulting, LLC

Address: 392 Andover Street, Wilmington, MA 01887, United States

E-mail: tianhengconsulting@gmail.com

ISED Statement

IC: 29441-M604

PMN: M604, X2MBIR

HVIN: M604

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES (B) / NMB (B).

French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil.

This device meets the exemption from routine evaluation limits in section 6.6 of RSS 102 and complies with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

English: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

French: Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. It shall be installed and operated with a minimum distance of 20cm between the radiator and the body.

French: Cet équipement est conforme aux limites d'exposition IC définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et la carrosserie.

CE Declaration of Conformity

Shenzhen Xtooltech Intelligent Co., Ltd. declares that this Module Programmer complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is permitted for use in all EU member states.

UKCA

Shenzhen Xtooltech Intelligent Co., Ltd. declares that this Module Programmer satisfies all technical regulations applicable within the scope of UK Radio Equipment Regulations (SI 2017/1206), UK Electrical Equipment (Safety) Regulations (SI 2016/1101), and UK Electromagnetic Compatibility Regulations (SI 2016/1091). The same application has not been lodged with any other UK Approved Body.

Contact Information

Customer Services: supporting@xtooltech.com

Official Website: https://www.xtooltech.com/

Address: 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen, China

Corporate & Business: marketing@xtooltech.com

Models: M604, X2MBIR Module Programmer, X2MBIR, Module Programmer, Programmer

File Info : application/pdf, 1 Pages, 610.42KB

GetApplicationAttachment.html?id=8301134

References

Microsoft: Print To PDF

Related Documents

	XTOOL KC501 Key Programmer User Manual Comprehensive user manual for the XTOOL KC501 Key Programmer, detailing its functions, specifications, appearance, and upgrade procedures for automotive locksmiths.
	XTOOL X100MAX Auto Key Programmer User Manual: Features & Operation Guide Comprehensive user manual for the XTOOL X100MAX Auto Key Programmer. Learn about its diagnostic functions, special service procedures, key programming capabilities, and safe operation guidelines for automotive professionals and enthusiasts.
	XTOOL X100MAX Auto Key Programmer User Manual Comprehensive user manual for the XTOOL X100MAX Auto Key Programmer, detailing its features, operation, key programming, diagnosis, and special functions for automotive maintenance by Shenzhen Xtooltech Intelligent Co., LTD.
	XTOOL D7 Smart Diagnostic System User Manual Comprehensive user manual for the XTOOL D7 Smart Diagnostic System, detailing operation, diagnostics, special functions like ABS bleeding, oil reset, EPB, SAS, BMS, injector coding, DPF regeneration, TPMS reset, and troubleshooting. Learn how to use this advanced automotive scan tool effectively.
	XTOOL D7 Smart Diagnostic System User Manual This user manual provides detailed instructions and information for the XTOOL D7 Smart Diagnostic System, a professional automotive diagnostic tool supporting full system diagnostics, maintenance resets, and advanced functions for various vehicle models.
	XTOOL V207 Wireless Diagnostics Module User Manual User manual for the XTOOL V207 Wireless Diagnostics Module, providing operating instructions, technical specifications, safety precautions, and aftersales services from Shenzhen Xtooltech Intelligent Co., LTD.
	XTOOL TP-series TPMS Diagnostic Tool User Manual Comprehensive user manual for the XTOOL TP-series TPMS Diagnostic Tool (TP150/TP200), covering operation, functions, settings, updates, and warranty. Learn how to check, diagnose, program, and relearn TPMS sensors.
	XTOOL V200 Wireless Diagnostics Module User Manual User manual for the XTOOL V200 Wireless Diagnostics Module, providing operation instructions, technical specifications, safety guidelines, and contact information for automotive diagnostics.