Ryobi 18 Volt Grass Shear

Product Overview

This document provides repair information and a parts list for the Ryobi P2906VNM 18 Volt Grass Shear.

Diagram 1: Ryobi 18 Volt Grass Shear

The primary diagram shows a line drawing of the Ryobi 18 Volt Grass Shear. It depicts the tool's ergonomic handle, the trigger mechanism for operation, and the cutting head at the front, equipped with blades designed for trimming grass and shrubs.

Exploded View

Diagram 2: Exploded View of Grass Shear Components

This section presents an exploded view of the grass shear, illustrating how the various parts assemble. Key components include the housing assemblies (upper and lower), the motor and pinion assembly, gears, blades, trigger, switch, and associated hardware like screws and washers. The arrangement helps in understanding the internal structure and disassembly/reassembly process.

Parts List

Wiring Diagram

Diagram 3: Wiring Diagram

The wiring diagram illustrates the electrical connections within the Ryobi P2906VNM 18 Volt Grass Shear. It shows the flow of power from the battery (implied, not shown) through the switch to the motor. The key components connected are:

• Switch: Controls the power to the motor.
• Receptacle and Wire Assembly: Connects the switch to the motor and potentially the battery connection point.
• Motor and Pinion Assembly: The electric motor that drives the cutting blades.
• Contact Plate Holder Assembly: Likely part of the battery connection or power delivery system.

Connections are indicated by wires, with specific colors noted: RED and BLACK. The diagram shows the switch receiving input (likely from the battery via the contact plate holder) and outputting to the motor. The receptacle and wire assembly bridges these connections.