User Manual for highmore models including: HM-GD008-001, Aggro Gaming Desk 40 Inch

40 inch

Aggro 40 in. Rectangular Black LED Computer Gaming Desk Use and Care Manual

HIGHMORE HM-GD008-001 840082502647 0840082502647 1007246120

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 11 Pages, 2.11MB

Document Document

8
Issue 1 - 30/09/21

1. The maximum weight that can be placed on this product is 176.4lbs. 2. This product must not be used as a seat. 3. Check carefully to ensure correct and complete assembly before using. 4. Don't allow children to play near the chair as their behaviour is unpredictable. The manufacturer or importer is not responsible for loss, injury, or damage due to improper actions or use. 5. Do not use corrosive or abrasive materials near the product. Please ensure that the cleaner used will not pollute the environment. 6. Cleaning should not be attempted by children without supervision. 7. Please make sure there are no hazard sources in your operating environment. e.g., do not leave tools around. Always be careful to dispose of the packaging materials in order to avoid any possible danger, e.g. plastic bags may lead to choking hazard to children. 8. We recommend you keep the original packaging of the item in case of the need for return or future transportation. 9. Do not use outdoors. SAVE THESE INSTRUCTIONS. For Household use only.
LED light: Power supply voltage: DC 5V

1 Table leg Qty 2 (20.86x0.98x28.11")

2 Support Qty 2 (34.65x1.06x1.1")

3 Rear brace (Left) Qty 1 (7.87x1.97")

4 Rear brace (Right) Qty 1 (7.87x1.97")

UNDERSIDE
5 Table top Qty 1 (39.37x23.62x0.59")

6 Cup holder Qty 1 (7.09x2.76")

7 Headphone hook Qty 1 (5.12x1.97")

8 Cable management box Qty 1 (16.54x5.51x2.76")

9 Cable management bracket (Left) Qty 1 (4.72x4.33x0.39")

10 Cable management bracket (Right) Qty 1 (4.72x4.33x0.39")

11 Leg cover Qty 2 (5.91x3.94x1.57")

12 Cable clip (Right) Qty 1 (2.36x0.71")

13 Cable clip (Left) Qty 1 (2.36x0.71")

14 LED side Extension (Left) Qty 1 (21.26x4.72x0.98")

15 LED side Extension (Right) Qty 1 (21.26x4.72x0.98")

16 Mouse pad Qty 1 (31.49x11.81")

17 Decal (Left) Qty 1 (9.84x1.77")

18 Decal (Right) Qty 1 (9.84x1.77")

Allen key Qty 1

Screw M8x8.26" Qty 8

Nut M8x1.96" Qty 2

Height adjustable foot Qty 4

Screw M4x6.29" Qty 52

Phone holder Qty 7

Pen holder Qty 1

Cable tie Qty 5

LED cable Qty 1

STEP 1
Assemble supports 2 in between legs 1 using screws # .

#

Screws need to be checked

1

and tightened again after

assembly is completed.

"

#

Allen key Qty 1

Screw M8x8.26" Qty 4

STEP 2
Assemble rear braces 3 and 4 in the positions shown,at the back of the desk.
Secure using fixings # and $.
4

#
2 2

# 2

Front

2

1

# Back

$

#

3

#

Front

Tighten all screws.

"

#

$

Allen key Qty 1

Screw

Nut

M8x8.26" Qty 4 M8x1.96" Qty 2

4

Back

STEP 3
With help, carefully place desk top 5 upside down onto a clean, flat, protected surface.

With help, locate leg frame

into position and secure using screws & .

&

"

&

Allen key Qty 1

Screw M4x6.29" Qty 16

STEP 4
Assemble the two parts of cup holder 6 together as shown.
Assemble cup holder 6 and headphone hook 7 to the underside of desk top 5 using screws & .
Screw height adjustable feet % into the underside of legs 1 .
&

6 6

UNDERSIDE 5
Front
Shown Upside Down

Back

%

1 1
& Back
5 7

"

%

&

Allen key Qty 1

Height adjustable Screw

foot Qty 4

M4x6.29" Qty 6

Front Shown Upside Down

STEP 5
Assemble cable clips 12 and 13 to the underside of desk top 5 using screws & .
Note: Cable clips are located at the back.

"

&

Allen key Qty 1

Screw M4x6.29" Qty 4

STEP 6
Assemble cable management brackets 9 and 10 to the back of desk top 5 using screws & .

"

&

Allen key Qty 1

Screw M4x6.29" Qty 6

&

13 12

& 5

Back
12 13

Front 5

&

Front

&

9

5

10

Back &

10 5
Back

STEP 7
Assemble cable management box 8 in between cable management brackets 9 and 10 using screws & .

"

&

Allen key Qty 1

Screw M4x6.29" Qty 4

STEP 8
With help, carefully turn the desk over into the standing position.
Warning! The desk is heavy. Lift with care.
Clip leg covers 11 to legs as shown.

& 9

Front &
8

Back

10

& 8

10

11

11
11
11

STEP 9
Assemble LED side extensions 14 and 15 at each side of the desk top using screws & .

Connect cable + in between LED side extensions as
show.

Use cable tie ) to support cable + .

Stick decals 17 and 18 to legs as shown.
Place Mouse Pad 16 into position.

16 14

& 17

+ )

+

15

Back
15 & 18

"

&

)

+

Allen key Qty 1

Screw M4x6.29" Qty 16 Cable tie Qty 5

LED cable Qty 1

STEP 10
Locate Phone Holders ' and Pen Holder ( as required.

' (

Button M (means Mode) Press M once to turn RGB light on
Press M twice to enter special volume control mode
Press M three times to turn RGB light off

Button C (means Colour switch) Press C to scroll through light colour options

'

(

Phone holder

Qty 7

Pen holder Qty 1

9

' (

10