Furinno Toilet Space Saver Assembly Instructions
Model: 99763
Estimated Assembly Time: Approx. 25 minutes
Recommended Persons: 1 Person
Tools Required for Assembly: No tools required for main assembly. A 1/4 inch drill bit is required for wall anchoring (Step 4).
Useful Hints Before You Start
- Read each step carefully before starting.
- It is important that each step is performed in correct order to avoid difficulties.
- Identify, sort and count the parts before assembly.
- Assemble your furniture on packaging cardboard to prevent scratch or damage.
- Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
- Using incompatible hardware might cause damage to product.
Hardware & Parts List
Hardware List
| NO | HARDWARE LIST | QTY |
|---|---|---|
| 1 | TOP CAP | 4pcs |
| 2 | LONG POLE | 14pcs |
| 3 | SHORT POLE | 8pcs |
| 4 | LEG | 4pcs |
Parts List
| NO | PARTS LIST | QTY |
|---|---|---|
| A | TOP/SHELF PANEL | 3pcs |
| B | SIDE SUPPORT BAR | 6pcs |
| C | BACK SUPPORT BAR | 1pc |
Assembly Steps
Step 1: Connect Panels and Poles
Attach the side support bars (B) to the top/shelf panels (A) using the long poles (2) and short poles (3). The unit consists of three shelf panels (A) supported by side support bars (B). Attach the legs (4) to the bottom of the side support bars.
Step 2: Position Over Toilet
Carefully place the assembled unit over the toilet bowl. Ensure it is stable and centered.
Step 3: Attach Back Support
Secure the back support bar (C) to the rear of the unit to add stability.
Step 4: Wall Anchoring (Tip-Over Prevention)
To prevent the unit from tipping over, it is recommended to anchor it to the wall. This involves drilling a 1/4 inch hole into the wall, inserting a wall plug, screwing in an eyelet screw, and then using a cable tie to connect the unit to the eyelet screw.
Step 5: Final Check and Safety
Follow the instructions from Step 4 to ensure the product is securely anchored to prevent tip-over. This is crucial for safety, especially in households with children.
Recommended Maximum Weight
Weight Limit: 10 lbs per shelf (Unit in Pounds).
It is important not to exceed the recommended load limits for each shelf to maintain stability and prevent product collapse.
Warning
- This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.
- DO NOT allow children to climb on the unit.
- Put heavier items on lower shelves.
Customer Support
For replacement requests or product inquiries, please contact the Furinno Customer Service Team by emailing at support@furinno.com.
Visit us online: www.furinno.com
Connect with us: [Facebook] [Pinterest] [YouTube]
