RF EXPOSURE EXEMPT REPORT

Report No.: SZ25030028S01

Applicant: Anker Innovations Limited

Product Name: eufy Panic Button E10

Model Name: T90P0

Brand Name: eufy

FCC ID: 2AOKB-T90P0

Standard(s): 47 CFR Part 2(2.1093)

Receipt Date: 2025-03-05

Test Date: 2025-03-12 to 2025-04-02

Issue Date: 2025-06-25

Edited by: Zeng Xiaoying (Rapporteur)

Approved by: Shen Junsheng (Supervisor)

Note: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website.

Version	Date	Reason for Change
1.0	2025-06-25	First edition

1. Technical Information

Note: Provided by applicant.

1.1 Applicant and Manufacturer Information

Applicant:	Anker Innovations Limited
Applicant Address:	Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong
Manufacturer:	Anker Innovations Limited
Manufacturer Address:	Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong

1.2 Equipment Under Test (EUT) Description

Product Name:	eufy Panic Button E10
Sample No.:	5#, 6#
Hardware Version:	V2.0
Software Version:	V1.1.1.0
Operating Frequency:	920.0MHz, 920.2MHz, 920.4MHz, 920.6MHz, 920.8MHz
Channel Number:	5
Antenna Type:	Metal Monopole Antenna
Antenna Gain:	-2.01dBi

Note 1: The EUT description presented in the report are provided by applicant and/or manufacturer, and the test laboratory is not responsible for the accuracy of the information. For a more detailed description, please refer to Specification or User's Manual supplied by the applicant and/or manufacturer.

1.3 Applied Reference Documents

Leading reference documents for testing:

Identity	Document Title	Remark
47 CFR Part 2(2.1093)	Radio Frequency Radiation Exposure Assessment: Portable devices	/
KDB 447498 D01v06	General RF Exposure Guidance	/

Note 1: Any additions, deviation, or exclusions from the method shall be noted in the "Remark".

2. Device Category and RF Exposure Limit

Based on 47 CFR 2.1093, this device belongs to portable device category with General Population/Uncontrolled exposure.

Portable Devices: 47 CFR 2.1093(b)

For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user.

General Population/Uncontrolled Exposure: 47 CFR 2.1093(d) (2)

Limits for General Population/Uncontrolled exposure: 0.08 W/kg as averaged over the whole-body and spatial peak SAR not exceeding 1.6 W/kg as averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the hands, wrists, feet and ankles where the spatial peak SAR shall not exceed 4 W/kg, as averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). General Population/Uncontrolled limits apply when the general public may be exposed, or when persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or do not exercise control over their exposure. Warning labels placed on consumer devices such as cellular telephones will not be sufficient reason to allow these devices to be evaluated subject to limits for occupational/controlled exposure in paragraph (d)(1) of this section.

3. Maximum Average Power Summary

Frequency(MHz)	Max. Emission E(dBμV/m)	Max. Emission (V/m)	Time-averaging EIRP (mW)
920.4	92.90	0.0442	0.5850

Note 1: According to KDB 447498, SAR test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.

Note 2: The maximum average emission refers to report (Report No.: SZ25030028W01).

4. RF Exposure Evaluation

Standalone Transmission SAR Evaluation:

1. According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation Distances≤ 50 mm are determined by:

[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0.

f(GHz) is the RF channel transmit frequency in GHz
Power and distance are rounded to the nearest mW and mm before calculation
The result is rounded to one decimal place for comparison

2. Standalone SAR measurement is not required for the EIRP is less than the exempt condition according to KDB 447498 D01v06 4.3.2).

Simultaneous SAR Evaluation:

This device only incorporates one transmitter, therefore simultaneous SAR evaluation is not required.

Annex A Testing Laboratory Information

1. Identification of the Responsible Testing Laboratory

Laboratory Name:	Shenzhen Morlab Communications Technology Co., Ltd.
Laboratory Address:	FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China
Telephone:	+86 755 36698555
Facsimile:	+86 755 36698525

2. Identification of the Responsible Testing Location

Name:	Shenzhen Morlab Communications Technology Co., Ltd.
Address:	FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China

3. Facilities and Accreditations

All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, Block 67, BaoAn District, Shenzhen, 518101 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.10-2013 and CISPR Publication 22; the FCC designation number is CN1192, the test firm registration number is 226174.

	RF Exposure Evaluation for eufy Security C220 Smart Lock (FCC ID: 2AOKB-T8170) This document provides the RF exposure evaluation for the eufy Security C220 Smart Lock, FCC ID: 2AOKB-T8170, detailing compliance with FCC regulations for human exposure to radio frequency radiation. It includes EUT specifications, MPE limits, the Friis transmission formula, and measurement results.
	eufyCam 2 Pro Wire-Free HD Security Camera Quick Start Guide Get started with your eufyCam 2 Pro Wire-Free HD Security Camera. This guide provides setup, mounting, and charging instructions for your eufy security system.
	Anker Innovations Limited eufy Wearable Breast Pump S1/E10 FCC Certification FCC Equipment Type Attestation for Anker Innovations Limited's eufy Wearable Breast Pump S1 and E10 models (T8D02, T8D03), FCC ID 2AOKB-T8D02, confirming compliance with FCC rules.
	Anker Innovations Limited: FCC Section 2.911(d)(5)(ii) Applicant Attestation for eufy Wearable Breast Pump Official FCC filing by Anker Innovations Limited, attesting that their eufy Wearable Breast Pump S1 and E10 (FCC ID: 2AOKB-T8D02, Models: T8D02, T8D03) are not identified on the Covered List as per Section 2.911(d)(5)(ii) of the Secure Networks Act.
	eufy 4G LTE Camera S330 Quick Start Guide Get started quickly with the eufy 4G LTE Camera S330. This guide provides essential setup instructions, safety information, and regulatory compliance details for your eufy security device.
	eufy Indoor Cam 2K Pan & Tilt Quick Start Guide Get started quickly with the eufy Indoor Cam 2K Pan & Tilt. This guide provides essential information on setup, mounting, and powering on your indoor security camera.
	eufy Indoor Cam 2K Pan & Tilt Quick Start Guide Get started with your eufy Indoor Cam 2K Pan & Tilt. This quick start guide provides essential information on setup, mounting, powering on, and troubleshooting for the eufy T8410 security camera.
	eufy Security Floodlight Cam E 2K Quick Start Guide Step-by-step instructions for setting up and installing the eufy Security Floodlight Cam E 2K, including unboxing, power connection, app setup, and outdoor mounting procedures.