PEDESTAL STAND & WALL MOUNTED FANS
Description
The Fantech range of robust Pedestal Fans are available in stand or wall mounted configurations and feature a powerful 3-speed motor. They are designed to increase comfort and lift productivity by providing relief to people working in hot locations through the effect of air movement.
Features
- Robust, durable construction.
- Height of the stand mounted unit is adjustable from 1400mm to 1660mm.
- 90° oscillating head with 20° up and down tilt.
- Finished in a durable grey coloured paint.
- Wall mounted unit comes with easy to fit wall mounting kit.
- 3 operating speeds to suit specific cooling needs.
- Fans are supplied in kit form ready for easy assembly.
- Finger guards comply with Australian standards.
Typical Applications
Designed to provide relief in many locations such as marquees, club rooms, gymnasiums, workshops, milking sheds and warehouses.
Dimensions
Stand Mounted
Height is adjustable from 1400mm to 1660mm. The unit includes a stand with a base and a 550mm fan tube. The fan head offers 90° oscillation and 20° up and down tilt. Weight: 20.5kg.
Wall Mounted
The fan tube is 614mm. The unit is designed for wall mounting and includes a wall bracket. The fan head offers 90° oscillation and 20° up and down tilt. It is recommended to install at least 2.5 metres from the floor. Weight: 13.5kg.
Technical Data
Model Numbers
- Stand Mounted: PSET634-03SP
- Wall Mounted: PWET634-03SP
| Speed Setting | Fan Speed (rev/sec) | Air Flow (m³/sec) | Avg dB(A) @ 5m | Single-phase Watts | Single-phase Amps |
|---|---|---|---|---|---|
| High | 23 | 3.4 | 69 | 230 | 0.90 |
| Mid | 21 | 3.1 | 60 | 175 | 0.80 |
| Low | 20 | 2.8 | 56 | 135 | 0.70 |
How to Order
Select the model that meets your requirement and order by model number.
Scan the QR code [link to online information] to view more information online.
Misting Kits
The misting kit produces an ultra-fine mist that provides additional cooling effect through evaporation. They are designed to easily fit to the front grille of most fans and work on normal house mains water pressure.
Combined with an air circulating fan, a misting kit provides rapid cooling to work areas and outdoor recreation facilities. It also helps to reduce the dangers of fatigue in the work place and improves productivity in hot conditions.
Features
- Available in 3, 5 and 7 nozzle kits.
- High quality brass nozzle with long wearing stainless steel orifice and pin.
- 19mm hose adaptor fitted with a low maintenance stainless steel filter.
- Maximum working pressure 125psi.
Codes
- FMK3 - 3 nozzle misting kit
- FMK5 - 5 nozzle misting kit
- FMK7 - 7 nozzle misting kit
How to order
FMK - Fantech Misting Kit 3, 5, 7 - Number of misting nozzles.
Construction
Stand mounted unit fitted with heavy cast iron base. Wall mounted unit comes with a heavy duty wall bracket and tube. Impellers are of aluminium and fully balanced. Wire finger guards are grey painted mesh. All steel components have a corrosion resistant finish.
Motors
Type - squirrel cage induction motor. Electricity supply - 220-240V, single-phase, 50Hz. Bearings - sealed-for-life, ball. 3-speed motor with switch.
Internal Thermal Protection
Auto-reset type fitted as standard.
Suggested Specification
The cooling fans shall be of the Pedestal type, suitable for stand or wall mounting as nominated and be supplied by Fantech Pty Ltd. They shall be of the model numbers shown on the schedule/drawings. Impellers shall be manufactured from aluminium and shall operate in 3 speeds which are controlled by a switch that includes an off position. Wire finger guards shall be of grey painted mesh.
