Milwaukee M18 FUEL™ Duplex NAILER Service Parts List
Catalog No.: 2844-20
Serial No.: P05A
Bulletin No.: 54-00-2840
Revised Bulletin Date: June 2024
Document Type: Wiring Instruction
Note: Specify Catalog No. and Serial No. when ordering parts.
Service and Repair Information
Only maintenance, service, repairs, and replacements of parts as defined in the Operator's Manual can be performed by the user. All other repairs are to ONLY be performed by personnel authorized by MILWAUKEE TOOL. Do not attempt to install other parts; this COULD void your tool warranty.
For service, parts, or inquiries, contact:
- ? Customer Service at 1.800.SAWDUST (1.800.729.3878)
- ? E-Service tool repair at: www.milwaukeetool.com/e-service
- ? Find a local authorized MILWAUKEE service location at Milwaukeetool.com
- ? Find a MILWAUKEE factory Service Center Location or MILWAUKEE factory Central Repair Center at Milwaukeetool.com.
When contacting a factory service center, send the following, posted paid and insured:
- Your name, address, and phone number
- Description of the issues
- Copy of the proof of purchase
- Tool, charger, and batteries involved with the issues
MILWAUKEE Factory Central Repair Centers
MILWAUKEE TOOL Central Repair
1401 Sycamore Avenue
Greenwood, MS 38930
MILWAUKEE TOOL Central Repair
2198 Southtech Drive
Greenwood, IN 46143
Website: www.milwaukeetool.com
Address: 13135 W. LISBON RD., BROOKFIELD, WI 53005
Service Bill of Material Listing
Diagram Description
The diagram on page 2 presents an exploded view of the Milwaukee M18 FUEL™ Duplex Nailer, visually detailing the arrangement of its components. Each numbered callout in the diagram corresponds to a specific part or assembly listed in the "SERVICE BILL OF MATERIAL LISTING" table below. An "EXAMPLE" box (labeled 00) clarifies that when ordering a complete assembly (identified by a larger number), all its constituent component parts (identified by smaller numbers) are included.
- The primary illustration shows the main tool body, including the magazine housing, handle, trigger mechanism, and the nail driving head.
- Key assemblies and external parts are highlighted: the magazine and pusher assembly (170), the depth adjust knob assembly (171), the belt hook (2, 163), and the rafter hook assembly (123, 165).
- Internal components are also depicted, such as the complete latch assembly (4), latch pin (5), E-rings (6, 26), and the duplex spiker (24).
- Various fasteners like hook mount screws (1), M5 socket head cap screws (112), and M4 pan head screws (117), along with the valve access door (116), are shown.
- Smaller inset diagrams provide detailed views of specific sub-assemblies, including the depth adjust knob (171) and the constant force spring assembly (161).
| FIG. | PART NO. | DESCRIPTION OF PART | NO. REQ. |
|---|---|---|---|
| 1 | 05-74-0019 | Hook Mount Screw | (3) |
| 2 | 44-20-0001 | Belt Hook | (1) |
| 4 | 44-60-1024 | Complete Latch Assembly | (1) |
| 5 | 44-90-1004 | Latch Pin | (1) |
| 6 | E-Ring, ETW-2.5 | (1) | |
| 24 | Duplex Spiker | (1) | |
| 25 | 42-70-0550 | E-Ring, ETW-5 | (1) |
| 26 | Depth Adjust Knob Assy | (1) | |
| 112 | 05-74-0021 | M5 x 14mm Flanged Socket Head Cap Screw | (2) |
| 116 | 31-94-0001 | Valve Access Door | (1) |
| 117 | 06-82-0211 | M4 x 16mm Pan Hd. T-20 B ST Screw | (1) |
| 123 | Rafter Hook Assy | (1) | |
| 136 | 10-22-0529 | Warning Label (Not Shown) | (1) |
| 137 | 10-22-0528 | Warning Label (Not Shown) | (1) |
| 138 | 12-20-1196 | Service Nameplate (Not Shown) | (1) |
| 161 | 40-50-2844 | Constant Force Spring Service Assembly | (1) |
| 163 | 42-70-0024 | Belt Hook Service Assembly | (1) |
| 165 | 42-70-0139 | Rafter Hook Service Assembly | (1) |
| 170 | 43-40-0071 | Magazine and Pusher Service Assembly | (1) |
| 171 | 44-14-2844 | Depth Adjust Knob Service Assembly | (1) |
Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
