DJI Dock Release Notes

Release Date: 2023.11.23

Firmware Update Method

• DJI Dock: DJI FlightHub 2 / DJI Assistant 2
• Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
• Remote Controller: DJI Assistant 2 / App
• The built-in DJI Pilot 2 App will be updated with the Remote Controller firmware.

* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.

What's new

• DJI Dock: Fixed an occasional error prompt related to the air conditioning system's heater.

Notes:

• To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
• Visit DJI Dock Downloads to download manuals such as the Quick Installation Guide, Safety Guidelines, and User Manual.
• Visit DJI Dock Videos to watch the tutorial videos.
• Visit DJI FlightHub 2 for more information on DJI FlightHub 2.
• Scan the QR code to contact DJI Support: [QR Code for DJI Support]

Release Date: 2023.10.12

Firmware Update Method

• DJI Dock: DJI FlightHub 2 / DJI Assistant 2
• Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
• Remote Controller: DJI Assistant 2 / App
• The built-in DJI Pilot 2 App will be updated with the Remote Controller firmware.

* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.

What's new

• Matrice 30 Series Dock Version aircraft: Improved aircraft flight stability.

Notes:

• To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
• Visit DJI Dock Downloads to download manuals such as the Quick Installation Guide, Safety Guidelines, and User Manual.
• Visit DJI Dock Videos to watch the tutorial videos.
• Visit DJI FlightHub 2 for more information on DJI FlightHub 2.
• Scan the QR code to contact DJI Support: [QR Code for DJI Support]

Release Date: 2023.09.18

Firmware Update Method

• DJI Dock: DJI FlightHub 2 / DJI Assistant 2
• Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
• Remote Controller: DJI Assistant 2 / App
• The built-in DJI Pilot 2 App will be updated with the Remote Controller firmware.

* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.

What's new

• DJI Dock: Updated the RTH to Advanced RTH.
• DJI Dock: Optimized battery safety strategy. The dock cannot perform Continuous or Timed tasks if the battery cycle count exceeds 500 cycles. Immediate tasks and FlyTo tasks will not be affected.
• DJI Dock: Added support to stop the flight route task after pressing the emergency stop button when the dock is preparing for the flight route task.
• DJI Dock: Optimized the operation logic of the air conditioning system to reduce the fan noise when the air conditioning system is idle.
• DJI FlightHub 2: Added support for the aircraft to bypass GEO Zones when performing Fly To tasks or during RTH.
• DJI FlightHub 2: Added support to improve safety of RTH and safe Resume Task from Breakpoint. When editing the waypoints, the waypoint can be marked as a no-return point, and the flight route to its previous and next waypoints will be marked as a no-return area. The aircraft will fly along the flight route to exit the no-return area before performing RTH or Resume Flight from Breakpoint.
• DJI FlightHub 2: Added support for DJI AirSense to improve flight safety.
• DJI FlightHub 2: Added support to manage custom flight areas and GEO Zones in Flight Area Management, allowing for more flexible flight plans.
• DJI FlightHub 2: Added support to control PSDK payloads in DJI FlightHub 2.
• DJI FlightHub 2: Added support to set the palette, enable side-by-side view in the IR camera view, using RNG, and Face PinPoint in the livestream view after obtaining payload control.
• DJI FlightHub 2: Optimized the warning messages for emergencies such as alternate landing, incorrect landing locations, or unable to land on the dock.

DJI Pilot 2 Updates:

• Added warnings when configuring the dock in GEO zones.
• Added support for site selection using the DJI Mavic 3 Enterprise Series aircraft when configuring the dock.
• Added support to check the network connection for the dock.

Notes:

• To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
• Visit DJI Dock Downloads to download manuals such as the Quick Installation Guide, Safety Guidelines, and User Manual.
• Visit DJI Dock Videos to watch the tutorial videos.
• Visit DJI FlightHub 2 for more information on DJI FlightHub 2.
• Scan the QR code to contact DJI Support: [QR Code for DJI Support]

Release Date: 2023.07.18

Firmware Update Method

• DJI Dock: DJI FlightHub 2 / DJI Assistant 2
• Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
• Remote Controller: DJI Assistant 2 / App
• The built-in DJI Pilot 2 App will be updated with the Remote Controller firmware.

* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.

What's new

• DJI Dock: Added support to reset standard maintenance count for the dock in DJI Pilot 2.
• DJI Dock: Optimized the RTH logic in strong wind conditions. The aircraft will return to home if the wind speed is too high.

Notes:

• To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
• Visit DJI Dock Downloads to download manuals such as the Quick Installation Guide, Safety Guidelines, and User Manual.
• Visit DJI Dock Videos to watch the tutorial videos.
• Visit DJI FlightHub 2 for more information on DJI FlightHub 2.
• Scan the QR code to contact DJI Support: [QR Code for DJI Support]