HPA-0 4 CS Plus compact D Set 1.1
Air-to-Water Heat Pump
Elevate your new construction standards with the HPA-0 4 CS Plus compact D Set 1.1. This air-to-water heat pump is designed for single-family homes, offering high efficiency through advanced inverter technology.
Reliable Power Supply
The heat pump, with its comprehensive features, ensures a constant supply of domestic hot water. The cooling function is included, providing comfort during warm days.
Installation from a Single Set
Most essential installation components, such as the hydraulic module and connection components, are integrated into the set. This simplifies installation for specialized installers, requiring minimal effort and space.
Key Features
- The set includes an outdoor air-to-water heat pump for heating and cooling, along with the HSBC 180 Plus hydraulic tower.
- Inverter technology ensures high efficiency and low energy costs.
- Low noise emissions are achieved through thoughtful device design.
- An optional "Silent Mode" further reduces noise during nighttime operation.
- Supply temperatures up to 60 °C provide high comfort for domestic hot water.
- Units with integrated domestic hot water tanks and buffer tanks occupy half the space of two separate tanks.
- Compact design, system safety, and energy efficiency are optimized for single-family homes.
Set Components
Element Set 1: Heat Pump
| Type | HPA-0 4 CS Plus compact D Set 1.1 | HPA-0 8 CS Plus compact D Set 1.1 |
|---|---|---|
| Technical Data | ||
| Energy efficiency class for heat pump W35 (A+++ → D) | A++ | A+++ |
| Energy efficiency class for heat pump W55 (A+++ → D) | A+ | A++ |
| SCOP 35 °C (EN 14825) | 4.15 | 4.61 |
| Heating capacity at A7/W35 (EN 14511) | 2.73 kW | 4.86 kW |
| Heating capacity at A2/W35 (EN 14511) | 2.58 kW | 5.30 kW |
| Heating capacity at A-7/W35 (EN 14511) | 3.96 kW | 7.80 kW |
| Cooling capacity at A35/W7 max. | 3.00 kW | 6.00 kW |
| Cooling capacity at A35/W18, partial load | 1.50 kW | 3.00 kW |
| Cooling capacity at A35/W18 max. | 3.00 kW | 6.00 kW |
| Energy efficiency factor at A7/W35 (EN 14511) | 4.70 | 4.76 |
| Energy efficiency factor at A2/W35 (EN 14511) | 3.64 | 3.80 |
| Energy efficiency factor at A-7/W35 (EN 14511) | 2.73 | 2.91 |
| Cooling power factor at A35/W7 max. | 1.62 | 1.73 |
| Cooling power factor at A35/W18, partial load | 3.56 | 3.28 |
| Cooling power factor at A35/W18 max. | 3.12 | 2.88 |
| Sound power level (EN 12102) | 52 dB(A) | 57 dB(A) |
| Lower source application limit min. / max. | -20...40 °C | -15...40 °C |
| Heating side application limit max. | 60 °C | 60 °C |
| Height | 740 mm | 812 mm |
| Width | 1022 mm | 1152 mm |
| Depth | 524 mm | 524 mm |
| Mass | 62 kg | 91 kg |
| Compressor rated voltage | 230 V | 230 V |
| Refrigerant | R410A | R410A |
Element Set 2: Hydraulic Tower
| Type | HSBC 180 Plus | HSBC 180 Plus |
|---|---|---|
| Name of Set | HPA-0 4 CS Plus compact D Set 1.1 | HPA-0 8 CS Plus compact D Set 1.1 |
| Technical Data | ||
| Energy efficiency class (A+ → F) | B | B |
| Energy consumption for temperature maintenance over 24 hours at 65 °C | 1.29 kWh | 1.29 kWh |
| Rated capacity of domestic hot water tank | 178 l | 178 l |
| Rated capacity of buffer tank | 80 l | 80 l |
| Heat exchanger surface area | 1.59 m² | 1.59 m² |
| Heat exchanger capacity | 10 l | 10 l |
| Height | 1910 mm | 1910 mm |
| Width | 605 mm | 605 mm |
| Depth | 917 mm | 917 mm |
| Height of tilted unit | 1986 mm | 1986 mm |
| Mass | 134 kg | 134 kg |
Further information on set components can be found in the descriptions of individual products. A standing or wall-mounted console can be ordered from the accessories range.
Distributors
Our local distributors can provide necessary information. Find a distributor at: www.stiebel-eltron.pl/pl/info/znajdz-dystrybutora.html
Equipment Installation
Installation of equipment that is not ready for connection must be performed by a qualified installer or an authorized service company.
