Manuals+

Hansgrohe Faucet Assembly Instructions

This document provides assembly instructions, technical specifications, and performance data for various Hansgrohe faucet models.

Product Series and Model Numbers

The following faucet series and their associated model numbers are covered:

General Assembly Guidance

The following sections detail the assembly process for different faucet models. Specific steps may vary by model.

Assembly Step 1a: Novus, E/S, Logis, Metris, Metropol, Finoris, Vivenis

Description: This step illustrates the initial mounting of the faucet body. It involves inserting a component (labeled 'X') into a wall fitting, with a specified distance of 15 mm from the surface. The diagram shows a wall connection and the faucet body being attached. The required depth for the wall fitting is indicated as 30-35 mm.

Tools/Parts: Implied wall fitting, faucet body, component 'X'.

Assembly Step 1b: Metris Classic

Description: Similar to step 1a, this shows the mounting of the Metris Classic faucet. A component 'X' is inserted into a wall fitting at a 15 mm distance. The wall fitting depth requirement is 33-37 mm.

Tools/Parts: Implied wall fitting, Metris Classic faucet body, component 'X'.

Assembly Step 1c: Talis S, Rebris S, Rebris E

Description: This step covers the assembly for Talis S, Rebris S, and Rebris E models. A component 'X' is fitted into a wall connection at 15 mm distance. The wall fitting depth is specified as 33-35 mm.

Tools/Parts: Implied wall fitting, faucet body, component 'X'.

Assembly Step 1d: Metris S, PuraVida

Description: Assembly for Metris S and PuraVida models. Component 'X' is inserted into a wall fitting at 15 mm distance. The wall fitting depth is 28-31 mm.

Tools/Parts: Implied wall fitting, faucet body, component 'X'.

Assembly Step 1e: Metropol Classic

Description: Assembly for Metropol Classic. Component 'X' is fitted into a wall connection at 15 mm distance. The wall fitting depth is 37-41 mm.

Tools/Parts: Implied wall fitting, Metropol Classic faucet body, component 'X'.

Assembly Step 2: Silicone Application

Description: This step illustrates the use of silicone sealant. It shows a tube of silicone sealant, a sealant gun, and a diagram indicating where to apply the silicone. The text mentions 'Armaturenfett' (faucet grease) and 'Silicone'.

Tools/Parts: Silicone sealant, sealant gun, grease.

Assembly Steps 3a-3k: Specific Model Assemblies

These steps detail the assembly of specific components for various models, often involving screws, seals, and the faucet body. Key details include:

  • Step 3a (Metris Classic): Attaching the spout. Requires SW 8 mm or SW 12 mm tool, and SW 3 mm tool with 2 Nm torque. Wall fitting depth 33-37 mm.
  • Step 3b (E/S): Attaching the spout. Requires SW 3 mm tool with 2 Nm torque. Wall fitting depth 30-35 mm.
  • Step 3c (PuraVida): Attaching the spout. Requires SW 3 mm tool with 2 Nm torque. Wall fitting depth 28-31 mm.
  • Step 3d (Metris S): Attaching the spout. Requires SW 3 mm tool with 2 Nm torque. Wall fitting depth 28-31 mm.
  • Step 3e (Logis): Attaching the spout. Requires SW 2.5 mm tool with 2 Nm torque. Wall fitting depth 30-35 mm.
  • Step 3f (Metris): Attaching the spout. Requires SW 3 mm tool with 2 Nm torque. Wall fitting depth 30-35 mm.
  • Step 3g (Talis S): Attaching the spout. Requires SW 2.5 mm tool with 2 Nm torque. Wall fitting depth 33-35 mm.
  • Step 3h (Metropol Classic): Attaching the spout. Requires SW 3 mm tool with 2 Nm torque. Wall fitting depth 37-41 mm.
  • Step 3i (Metropol): Attaching the spout. Requires SW 2.5 mm tool with 2 Nm torque. Wall fitting depth 30-35 mm.
  • Step 3j (Novus, Finoris, Vivenis): Attaching the spout. Requires SW 2.5 mm tool with 2 Nm torque. Wall fitting depth 30-35 mm.
  • Step 3k (Rebris S, Rebris E): Attaching the spout. Requires SW 2.5 mm tool with 2 Nm torque. Wall fitting depth 33-35 mm.

Dimensional Specifications

The following tables provide key dimensions for various faucet models. Dimensions are typically in millimeters (mm) and connection sizes are indicated.

Novus (71320XXX)

Dimensions: Overall length 211 mm, projection 192 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

E/S (13414XXX)

Dimensions: Overall length 159 mm, projection 147 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

Logis (71410XXX)

Dimensions: Overall length 206 mm, projection 195 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

Metris (31494XXX)

Dimensions: Overall length 181 mm, projection 165 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

Metropol (32542XXX)

Dimensions: Overall length 180 mm, projection 167 mm. Connection G3/4. Diameter of connection base ~68/68 mm. Wall fitting depth 30-35 mm.

Metris Classic (13413XXX)

Dimensions: Overall length 165 mm, projection 152 mm. Connection G3/4. Wall fitting depth 33-37 mm.

Metropol Classic (13425XXX)

Dimensions: Overall length 171 mm, projection 158 mm. Connection G3/4. Wall fitting depth 37-41 mm.

Talis S (72410XXX)

Dimensions: Overall length 195 mm, projection 175 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 33-35 mm.

Metris S (14420XXX)

Dimensions: Overall length 177 mm, projection 161 mm. Connection G3/4. Diameter of connection base ~65 mm. Wall fitting depth 28-31 mm.

PuraVida (15412XXX)

Dimensions: Overall length 167 mm, projection 196 mm. Connection G3/4. Wall fitting depth 28-31 mm.

Finoris (76410XXX)

Dimensions: Overall length 189 mm, projection 174 mm. Connection G1/2. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

Vivenis (75410XXX)

Dimensions: Overall length 211 mm, projection 202 mm. Connection G1/2. Diameter of connection base ~65 mm. Wall fitting depth 30-35 mm.

Rebris S / Rebris E (72430XXX / 72431XXX)

Dimensions: Overall length 212 mm, projection 200 mm. Connection G1/2. Wall fitting depth 33-35 mm.

Performance Charts

The following charts illustrate the relationship between water pressure and flow rate for various faucet models. Maximum recommended pressure is 1.0 MPa (10 bar) and maximum temperature is 60 °C.

PuraVida (15412XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

E/S (13414XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Logis (71410XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Finoris (76410XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Novus (71320XXX) / Metropol (32542XXX) / Metris (31494XXX) / Metris S (14420XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Metropol Classic (13425XXX) / Metris Classic (13413XXX) / Talis S (72410XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Vivenis (75410XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Rebris S (72430XXX) / Rebris E (72431XXX) Flow Rate Chart

Description: Chart showing flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) against pressure (P) in MPa and bar. Ranges from 0 to 6.0 bar (0 to 0.60 MPa) and 0 to 30 l/min.

Exploded Views and Parts Lists

The following sections provide exploded views and lists of components for various faucet models. Part numbers and dimensions are included.

Rebris S (72430XXX) / Rebris E (72431XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 98231000 (18x1,5)
  • 97768000 (M5x6)
  • 92754000 / 92754670 / SW 2.5 mm
  • (Ø 65 mm)
  • 94656000 (30 l/min)

Metris S (14420XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 97660000 (M6x6)
  • SW 3 mm
  • 13914000 (M24x1 - 25 l/min)
  • SW 22 mm
  • 97810000 (M6x8)
  • 98185000 (22x2)
  • 97766000
  • 98998000 (M 24x1 - 30 l/min)
  • 95290000

PuraVida (15412XXX) Parts

Components:

  • 97846000 (G3/4)
  • 95626000 (G1/2)
  • SW 8 mm
  • 97766000
  • 98128000 (13x2)
  • 97530000
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)
  • 94509000 (M3x12)
  • SW 1,5 mm

Metris (31494XXX) Parts

Components:

  • 97846000 (G3/4)
  • 95626000 (G1/2)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)
  • 98197000 (20x1,5)
  • 97660000 (M6x6)
  • SW 3 mm
  • 96512000 (M 24x1 - 30 l/min)
  • SW 22 mm

Vivenis (75410XXX) Parts

Components:

  • 95393000 (G1/2)
  • 92504000 (G3/4)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)

E/S (13414XXX) Parts

Components:

  • 96472000 (G3/4)
  • 97228000 (G1/2)
  • SW 12 mm
  • 98134000 (16x2,5)
  • 97530000
  • 97810000 (M6x8)
  • SW 3 mm
  • 13914000 (M24x1 - 25 l/min)
  • SW 22 mm

Metropol Classic (13425XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 98174000 (48x5)
  • 98128000 (13x2)
  • 97530000
  • 97660000 (M6x6)
  • SW 3 mm
  • 96512000 / 96512990 (M24x1 - 30 l/min)
  • SW 22 mm

Novus (71320XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)
  • 98128000 (13x2)
  • 97530000
  • 92851000 (M5x8)
  • SW 2,5 mm
  • 96512000 (M24x1 - 30 l/min)
  • SW 22 mm

Finoris (76410XXX) Parts

Components:

  • 95393000 (G1/2)
  • 92504000 (G3/4)
  • SW 8 mm
  • 97530000
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)
  • 98128000 (13x2)
  • 92851000 (M5x8)
  • SW 2,5 mm
  • 93965000 (M24x1)

Metris Classic (13413XXX) Parts

Components:

  • 97846000 (G3/4)
  • 95626000 (G1/2)
  • SW 8 mm
  • 97530000
  • 98128000 (13x2)
  • 97810000 (M6x8)
  • SW 3 mm
  • 96512000 (M24x1 - 30 l/min)
  • SW 22 mm

Talis S (72410XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 92754000 / 92754670 / 92754700 (Ø 65 mm)
  • 98128000 (13x2)
  • 97530000
  • (M5x6)
  • SW 2,5 mm
  • 96512000 (M24x1 - 30 l/min)
  • SW 22 mm

Logis (71410XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 97766000
  • 92851000 (M5x8)
  • SW 2,5 mm
  • 96512000 (M24x1 - 30 l/min)
  • SW 22 mm

Metropol (32542XXX) Parts

Components:

  • 92504000 (G3/4)
  • 95393000 (G1/2)
  • SW 8 mm
  • 98128000 (13x2)
  • 97530000
  • 97766000
  • 98231000 (18x1,5)
  • (M5x6)
  • SW 2,5 mm
  • 96512000 (M24x1 - 30 l/min)
  • SW 22 mm
  • 92360000 (M24x1 - 30 l/min)
  • SW 22 mm

Cleaning Recommendations and Warranty

For cleaning recommendations, warranty information, and contact details, please visit: www.hansgrohe.com/cleaning-recommendation.

The warranty period is 5 years for many Hansgrohe products.

Certifications and Compliance

Various models are certified by DVGW, SINTEF, NF, and ETA. Specific certifications include:

Hansgrohe SE, Auestraße 5 - 9, D-77761 Schiltach, Germany.

Contact: Telefon +49 (0) 78 36/51-1282, Telefax +49 (0) 7836/511440, E-Mail: info@hansgrohe.com, Internet: www.hansgrohe.com.

Models: 72431000, 72431000 Bath Fillers, Bath Fillers, Fillers

File Info : application/pdf, 16 Pages, 3.91MB

PDF preview unavailable. Download the PDF instead.

16 hrgh0385 pdf

References

Adobe PDF Library 16.0.7

Related Documents

Preview Hansgrohe Faucets: Installation and User Manual
Comprehensive installation and user guide for Hansgrohe faucets and mixers, offering detailed instructions, technical data, safety guidelines, and troubleshooting across multiple languages. Includes product information for various Hansgrohe series like PuraVida, Metris, Talis, Logis, and more.
Preview Hansgrohe Armaturen: Montage- und Bedienungsanleitung
Umfassende Anleitung für die fachgerechte Installation und sichere Bedienung von Hansgrohe Armaturen, inklusive technischer Daten, Sicherheitshinweisen und Modellübersichten.
Preview Hansgrohe Faucet Installation and Assembly Guide: Metropol, Metris, Talis, Focus, PuraVida
Comprehensive installation and assembly guide for Hansgrohe faucets including Metropol E, Metris E, Talis E², Focus E², PuraVida, Metris Classic, and Talis Classic. Features safety instructions, step-by-step assembly, dimensions, and parts list.
Preview Hansgrohe Metris & Talis S Faucets: Installation Guide and Technical Specifications
Comprehensive installation guide and technical specifications for Hansgrohe Metris Classic, Metris S, and Talis S faucets, featuring EcoSmart technology. Includes safety instructions, usage details, and product dimensions.
Preview Hansgrohe Metris & Talis Faucets: Installation and User Guide
Comprehensive guide for installing and using Hansgrohe Metris and Talis series faucets, including safety instructions, technical data, and EcoSmart® technology information.
Preview Hansgrohe Metropol/Metris/Talis/PuraVida Montage- und Bedienungsanleitung
Diese Anleitung bietet detaillierte Informationen zur Installation, Bedienung, Wartung und Fehlerbehebung der Hansgrohe Armaturenserien Metropol, Metris, Talis und PuraVida.
Preview Hansgrohe Shower Systems: Installation and Usage Guide
Comprehensive guide for Hansgrohe shower systems, covering installation, safety, maintenance, and troubleshooting for various models including Metropol, Metris, Talis, and PuraVida.
Preview Hansgrohe Faucet Installation Instructions and Warranty
Comprehensive installation guide and warranty information for Hansgrohe Metris S, Talis S, and Focus S faucets, including detailed diagrams and multilingual instructions.