Hansgrohe Faucet Installation and Assembly Guide

Introduction

This document provides essential safety information, detailed assembly instructions, dimensions, and part identification for various Hansgrohe faucet series. It consolidates information from multiple languages into a primary English version.

⚠️ Safety Instructions

During assembly, it is crucial to wear protective gloves to prevent injuries such as crushing or cuts. Always ensure that the fitting is installed, flushed, and tested according to valid norms and regulations.

Important: Do not use silicone sealant containing acetic acid.

Assembly Instructions

The following steps outline the general assembly process. Specific details and measurements may vary slightly depending on the model series and manufacturing date. Refer to the diagrams for visual guidance.

Model Series: 13973180 / 13974180 / 13975180 (Manufacturing Dates: 07/92 - 04/01)

1. Prepare the wall connection. Ensure the pipe extends at least 10mm from the wall surface.
2. Attach the initial mounting component.
3. Apply silicone sealant around the mounting area.
4. Secure the fitting using a bracket, ensuring a distance of approximately 10mm from the wall.
5. Assemble internal components using the provided wrench (SW 22 mm, max. 2 Nm torque).
6. Attach the final decorative cover or handle.

Model Series: 15970180 / 15973180 / 15974180 (Manufacturing Dates: > 05/01)

1. Prepare the wall connection. Ensure the pipe extends approximately 1mm from the wall surface.
2. Attach the initial mounting component.
3. Apply silicone sealant around the mounting area.
4. Secure the fitting using a bracket, ensuring a distance of approximately 20mm from the wall.
5. Assemble internal components using the provided wrench (SW 22 mm, max. 2 Nm torque).
6. Attach the final decorative cover or handle.

Dimensions

Detailed dimensions for specific product series are provided below:

Metropol E / Metris E / Talis E² / Focus E² (Model 15971XXX)

Overall height: 71 mm. Diameter: 50 mm. Depth from wall: 10 mm. Wall plate diameter: 66 mm.

PuraVida (Model 15978XXX)

Width: 68 mm. Depth from wall: 12 mm. Height: 45/45 mm.

Metris Classic / Talis Classic (Model 15961XXX)

Overall height: 75 mm. Width: 76 mm. Depth from wall: 14 mm. Projection: 70 mm.

Parts List

The following diagrams show exploded views of the components. Part numbers are indicated for reference:

Main Assembly Components

• Main body/housing: 94353XXX
• Sealing ring: 97358XXX
• Mounting bracket/nut: 98164000 (33x1.5)
• Internal valve/cartridge assembly: 94184000
• Decorative cover/handle: 36991XXX
• Flexible hose/connection: 96392000
• Other components include: 96370000, 95279XXX, 95278XXX.

Note: Specific part numbers may vary slightly based on the exact model and finish.

Finishes and Color Codes

The XXX code in model numbers often refers to the finish. Common codes include:

• 000: Chrome
• 090: Chrome/Gold-Optik
• 400: White/Chrome
• 820: Brushed Nickel
• 880: Edelmatt (Matte finish)

Refer to specific product documentation for a complete list of finishes.

Contact Information

For further assistance or inquiries, please contact Hansgrohe:

Hansgrohe
Postfach 1145
D-77761 Schiltach
Germany

Phone: +49 (0) 7836/51-1282

Fax: +49 (0) 7836/511440

Email: info@hansgrohe.com

Website: www.hansgrohe.com