Mondolux Cori Midi Downlight Installation Manual

Notes

• This fitting requires 220-240V AC/50Hz power input to the driver.
• Do not interchange any parts of this fitting.
• It is recommended to have some space (at least 75mm) around the fitting for air ventilation to extend product lifetime.
• Allow a minimum distance of 800mm between the fitting and the illuminated subject.
• Do not install the fitting near heat sources and do not touch the fitting when in use.
• Do not install any inductive loads such as exhaust fans within the same lighting circuit as this fitting. Issues caused by such connections will not be covered under warranty.
• If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• For any questions regarding the installation of this product, please contact Mondolux.

Installation Steps

1. Ensure the mains power is turned off.
2. Cut required holes in the ceiling. Ensure minimum space requirements between the fitting and driver are met. See Picture 1.
3. Pass the power supply wires through the cutout and plug into the mains socket. In case of an open flex, use water-proof connectors. See Picture 2.
4. Connect the driver to the light fitting using the quick connectors. Unscrew the front ring. See Picture 3.
5. Mount the fitting into the ceiling and secure it using the screws. Re-fix the front ring back to the fitting. See Picture 4.
6. Installation is complete. Turn the mains power on. See Picture 5.

Diagrams and Specifications

Picture 1: Cutout Preparation

Diagram showing a circular cutout in a ceiling with a dashed line indicating the fitting's diameter of 125mm.

Cutout Diameter: Ø125mm

Picture 2: Wiring Connection

Diagram illustrating wiring connections, showing a water-proof connector and mains socket labeled 'L N' (Live and Neutral).

Picture 3: Driver and Fitting Connection

Diagram showing the driver unit connecting to the light fitting using quick connectors. The front ring is shown being unscrewed.

Fitting Height: 140mm

Fitting Diameter: Ø126mm

Picture 4: Mounting the Fitting

Diagram illustrating the process of mounting the fitting into the ceiling, securing it with screws, and reattaching the front ring.

Picture 5: Completed Installation

Diagram showing the completed installation with the light fitting mounted in the ceiling.

Product Features

IP44 rated

CE certified

RoHS compliant