RESTMO AUTOMATIC WATER TIMER

Product Diagram

The automatic water timer features a dial for program selection, an LCD screen, and several buttons for operation. Key components include:

• 1. DIAL: Rotate to set up watering programs.
• 2. OK BUTTON: Press to confirm setups.
• 3. - BUTTON: Press to set up time, system.
• 4. MANUAL BUTTON: Press to turn timer on/off manually.
• 5. +/DELAY BUTTON: Press to set up time, system, delay watering.
• 6. OUTLET: Connection for the hose.
• 7. LCD SCREEN: Displays current time, program status, and settings.
• 8. INLET: Connects to the faucet.
• 9. FILTER: Located inside the inlet to prevent debris.

The timer operates in various modes: AUTO (according to preset programs), OFF (timer is off), TIME (set current time), P1/P2/P3 (set up 3 independent watering programs), INTVL (interval program), WEEK (weekly program).

Icons used on the LCD screen represent:

• ?: Watering program runs on this day.
• ?️: Manual watering.
• ☁️: Delay watering.

WARRANTY AND WARNINGS

Warranty

Restmo provides a one-year worry-free warranty. For warranty claims within one year from the original order date, please email your order ID to Restmo Support. Response is typically within 24 hours. Contact: support@restmo-link.com.

Warnings

• Only use with clear cold water.
• When expecting freezing temperatures, remove the timer from the hose/faucet and store it indoors to avoid potential freeze damage.
• The filter can prevent dirt and extend product lifetime. Clean the filter regularly and replace it if worn.

SPECIFICATIONS

BATTERY INSTALLATION

1. Pull out the battery tray on the back of the timer.
2. Insert two AAA alkaline batteries and replace the tray.
3. Ensure batteries are fully inserted with correct directions.

Low Battery Indicator: ?. Replace with new batteries if the low battery indicator displays.

TIMER SETUP

SET CURRENT TIME

1. Turn DIAL to TIME.
2. Press +/- buttons to choose 12H or 24H format.
3. Press OK button to move to hour/minute setup.
4. Press +/- buttons to set the current hour and minute.
5. Press OK button to move to day setup.
6. Press +/- buttons to set the current day (Monday to Sunday).
7. Turn dial to save changes.

Example display: 12H, 12:30PM, Tuesday.

SET WATERING PROGRAMS

Programs P1, P2, and P3 can be set up independently.

1. Turn DIAL to P1.
2. Press +/- buttons to choose watering mode: INTVL (Interval), WEEK (Weekly), or OFF.
3. If INTVL or WEEK mode is chosen:
   • Press OK button to move to START TIME setup.
   • Press +/- buttons to set the desired watering start time. Press OK button to move to HOW LONG setup.
   • Press +/- buttons to set the desired watering duration. Press OK button to move to HOW OFTEN setup.
4. For INTVL mode (Step 3 continued):
   • Press +/- buttons to set desired watering frequency from 1 hour to 30 days.

   Example: Watering starts at 5:00PM, runs 15mins every 12 hours.

5. For WEEK mode (Step 3 continued):
   • Press + button to select desired watering days (Monday to Sunday).
   • Press - button to unselect undesired watering days.

   Example: Watering starts at 6:00PM, runs 15mins on every Monday, Wednesday, Friday.

6. If OFF mode is chosen in step 2, proceed to step 7.
7. Turn dial to save changes.
8. Repeat steps 1-7 to set up P2 and P3.

Notes:

• In INTVL mode, if "HOW LONG" duration is greater than "HOW OFTEN" interval, it will be automatically skipped.
• In WEEK mode, at least one watering day must be selected in "HOW OFTEN".

AUTO WATERING

After P1/P2/P3 are set up, turn DIAL to AUTO. The timer will start automatically.

• When watering is off: LCD screen flashes between the current time and the start time & duration of the next watering program. Press OK button to check all 3 programs' setups.
• When watering is on: LCD screen flashes between the current time and the remaining watering time. ? lights up.

MANUAL WATERING

Manual watering allows watering without interrupting preset programs.

1. With DIAL at AUTO and watering off, press MANUAL BUTTON (?️) to enter manual watering setup.
2. Press +/- buttons to set manual watering duration. Press OK button to confirm (? lights up).
3. Manual watering starts. LCD screen flashes between the current time and the remaining watering time.
4. To cancel manual watering, press MANUAL BUTTON or turn DIAL to OFF and back to AUTO.

Example display: Current time 10:12AM, timer on manual mode, water will run 9mins.

DELAY WATERING

Delay watering postpones watering programs for a period of time.

1. With DIAL at AUTO and watering off, long press DELAY/+ BUTTON (3 secs) to enter delay watering setup (☁️ lights up).
2. Press +/- buttons to select a delay of 24hrs, 48hrs, or 72hrs. Press OK button to confirm.
3. Delay watering starts. LCD screen flashes between the current time and the remaining delay time.
4. To cancel delay watering, turn DIAL to OFF and back to AUTO.

Example display: Current time 2:26PM, timer on delay mode, will resume after 23hrs 58mins.

STOP WATERING

Turn DIAL to OFF. The timer will remain off.

Example display: OFF.

TROUBLESHOOTING

TIMER DOES NOT WATER AS PRESET. CHECK IF:

• Timer DIAL is set to AUTO. Hose faucet is on.
• TIME is set to the correct time (AM and PM).
• Program mode, start time, duration (HOW LONG), and frequency (HOW OFTEN) for all 3 programs (P1/P2/P3) are set as desired.
• Delay watering is not active.

HOSE CONNECTION LEAKS. CHECK IF:

• The filter of the timer and hose are both installed correctly.
• The faucet or hose has a 3/4" NH thread.
• Water pressure is within the specified range (8-120PSI / 0.5-8Bar).

TIMER VALVE WON'T TURN ON/OFF. RESET THE VALVE:

1. Attach the timer to a faucet and open the faucet to maximum.
2. Manually turn the timer on for more than 5 seconds, then turn it off.
3. Repeat this process more than 5 times until water flows properly.

TIMER DECREASE WATER PRESSURE:

This timer uses a solenoid valve, which technically decreases water pressure. Restmo also offers ball-valve timers that do not decrease water pressure. If unsatisfied with the reduced water pressure, contact Restmo for details on ball-valve timers.

Contact Us

For further assistance or details about ball-valve timers, please contact Restmo Support:

support@restmo-link.com

Garden Watering Made Easy