TAGA Harmony PF-USB Series [230-240V]

Introduction

Thank you for purchasing this TAGA Harmony power filter. The PF-USB series power filters combine functions of power noise filtering and charging via USB.

The electricity network in homes and workplaces is exposed to various interferences, such as electromagnetic interference (EMI) generated by connected appliances (refrigerators, air conditioners, computers, etc.). These interferences can originate from within your building or from outside, and their impact can vary depending on the time of day or week. These noises can enter your AC power and interfere with your audio-video system, negatively affecting its performance.

The TAGA Harmony power noise filter is designed to limit these negative noises from your electricity and isolate your system from contaminated power, allowing you to enjoy better quality audio and video equipment.

Contaminated electricity can also negatively impact internal circuits and power supplies of your equipment. The PF-USB filter acts as a buffer between the wall socket and your gear, helping to increase the longevity of connected components.

The built-in charging function via USB can be used for charging various devices like smartphones.

The removable Schuko-IEC C13 power cable offers the option to upgrade the system with a premium audiophile power cable.

Cleaning

Do not use strong or abrasive cleaners. Use a damp, soft cloth for cleaning.

Specifications and Latest Edition

Full technical specifications and the latest edition of the instruction manual are available on www.TagaHarmony.com.

Contents

• Safety Instructions (Page 3)
• Controls and Displays (Page 5)
• Hooking Up the Filter (Page 6)
• Operation (Page 7)
• Kit Content (Page 12)

Safety Instructions

IMPORTANT

READ THIS SECTION CAREFULLY BEFORE PROCEEDING!

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

⚡ The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

⚠️ An exclamation mark in a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

CAUTION: TO PREVENT ELECTRIC SHOCK, FULLY AND SECURELY INSERT THE POWER CABLE PLUG INTO THE POWER OUTLET, AND POWER CABLE CONNECTOR INTO THE UNIT SOCKET (IF THIS UNIT IS NOT EQUIPPED WITH AN INTEGRATED [ATTACHED] POWER CORD).

CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE THE FUSE (IF THE UNIT IS EQUIPPED WITH A USER REPLACEABLE FUSE) ONLY WITH THE SAME AMPERAGE AND VOLTAGE TYPE. IN CASE WHEN THE UNIT IS NOT EQUIPPED WITH A USER REPLACEABLE FUSE - REFER REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.

WARNING: THE UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE VENTILATION TO ALLOW FOR COOLING. DO NOT PLACE THE UNIT NEAR A HEAT SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

Detailed Safety Instructions:

1. Read Instructions: All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions: The safety and operating instructions should be retained for future reference.
3. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions: All operating and use instructions should be followed.
5. Cleaning: Unplug this product from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
6. Water and Moisture: Do not use this product near water (e.g., near a bath tub, wash bowl, kitchen sink, laundry tub, wet basement, or swimming pool). These precautions also apply to the power cord.
7. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table, as it may fall, causing serious injury or damage. Use only with accessories recommended by the manufacturer. Any mounting should follow manufacturer's instructions and use recommended accessories.
8. Ventilation: This unit has slots and openings for ventilation to ensure reliable operation and prevent overheating. These openings must not be blocked or covered. Do not place the product on soft surfaces like a bed or sofa. If placed in a built-in installation (e.g., bookcase), ensure proper ventilation. For products with separate power supply units, allow at least 5cm (2in.) of free space on all sides and the top.
9. Power Sources: Operate only from the type of power source indicated on the marking label. Consult your dealer or local power company if unsure. For battery-powered products, refer to operating instructions.
10. Grounding and Polarity: Some units require connection to a grounded power outlet for proper operation. Refer to the user manual for details. If markings for live (L) and neutral (N) conductors are present, connect polarity accordingly for optimal performance. Incorrect polarity will not affect durability or reliability.
11. Power-cord Protection: Route power supply cords to prevent them from being walked on or pinched by items. Pay attention to cords at plugs, receptacles, and exit points.
12. Lighting: For added protection during lightning storms or when left unattended for long periods, unplug from the wall outlet and disconnect antenna or system cables to prevent damage from surges.
13. Overloading: Do not overload wall outlets, extension cords, or receptacles, as this can result in fire or electric shock.
14. Object and Liquid Entry: Never push objects of any kind into product openings, as they may touch dangerous voltage points or cause short-circuits. Do not expose the apparatus to dripping or splashing, and do not place objects filled with water (e.g., vases) on it.
15. Servicing: Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16. Damage Requiring Service: Unplug the product and refer servicing to qualified personnel if: the power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the product; the product does not operate normally; the product has been dropped or damaged; or the product exhibits a distinct change in performance.
17. Replacement Parts: When replacement parts are required, ensure the technician uses parts specified by the manufacturer or with the same characteristics as the original. Unauthorized substitutions may result in fire, electric shock, or other hazards.
18. Safety Check: Upon completion of any service or repairs, ask the service technician to perform a safety check to ensure the product is in proper operating condition.
19. Wall or Ceiling Mounting: The product should only be mounted to a wall or ceiling as recommended by the manufacturer.
20. Heat: Position the product away from heat sources like radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
21. [Vacuum Tubes]: (Not applicable to this model) For products equipped with vacuum tubes, a cage or cover may be installed for safety. Do not remove it unless changing vacuum tubes. When removed, do not touch hot vacuum tubes.
22. Operating Environment: Operating temperature: +5°C to +35°C (+41°F to +95°F); humidity: less than 85% RH (cooling slots not blocked).

Controls and Displays

FRONT

Diagram showing the front panel of the TAGA Harmony PF-400USB power filter. It features a large power button labeled "POWER" with "ON" and "OFF" indicators, four filtered power sockets, and two USB-A charging ports.

• 1. Power Switch [ON (I) and OFF (0)]

REAR

Diagram showing the rear panel. It includes a "RESET" button, a power cable input socket, and regulatory markings including "CE" and "230-240V~50/60Hz 10A Max. power consumption: 2.5kW".

• 2. Reset Button
• 3. Power Cable Input

TOP

Diagram showing the top panel, featuring four filtered power sockets and two USB-A charging ports. The model is identified as /PF-400USB model shown/.

• 4. USB-A Charging Ports
• 5. Power Sockets – FILTERED Output

Hooking Up the Filter

Diagram illustrating the connection setup. The TAGA Harmony PF-400USB filter is shown in the center. Power cables connect from the filter's filtered output sockets to audio-video equipment such as an Amplifier/AV Receiver/Power Amplifier on the left, and a CD Player/Media Player/DAC/Tuner/DVD/BluRay Player/TV set on the right. The filter itself connects to a wall outlet via its power cable input.

1. Make sure the filter is turned off (the Power Switch is in the down OFF position and the Power Cable is removed from the wall outlet).
2. Using power cables (only a power cable for the filter is supplied with this product), connect your audio-video equipment to the Power Sockets – FILTERED Output. All power output sockets in this filter are filtered, and electrical noises are filtered and limited. Note! Check "Operation" for other useful operating instructions.
3. Your filter is ready for operation.

We recommend using Schuko plugs in all power cables.

Total maximum power load (wattage rating): The total maximum power consumption for all connected devices to the filter should not exceed the maximum power load for this filter. The total maximum power load for this filter is given in Kilowatts (kW) or Watts (W) and is printed on the filter. It is also available in the specifications on www.TagaHarmony.com.

Operation

This unit requires a single-phase 3-conductor electrical outlet.

Information about polarity

If it is required in your system, use the below drawings showing the polarity in the power sockets of this filter. L – LIVE | N – NEUTRAL

Diagram showing a standard power socket input with L (Live) and N (Neutral) terminals.

Diagram showing the filter's output sockets with L and N markings indicating correct polarity. The diagram specifies "Power Sockets - FILTERED Output (Power filter front panel facing left)".

1. Plug the Power Cable to the filter and into the electrical outlet.
2. Turn on the filter (the Power Switch should be in the upper ON position).

Charging via USB

Diagram depicting a smartphone and a tablet connected via USB cables to the filter's USB-A charging ports.

• Output: DC 5V
• Max total load: 2.1A (for all USB)

3. If you want to charge compatible devices: using a USB cable (not supplied with this product), insert one end into a free USB-A Charging Port and the other end to the device you want to charge. Note! Charging may lower the efficiency of the power noise filtering - we recommend not charging any devices during critical listening.

Operation - Charging Remarks

CHARGING - IMPORTANT SAFETY REMARKS!

In order not to void your warranty and to avoid damaging this filter and/or connected audio-video equipment and devices, strictly follow the below remarks:

• The USB-A Charging Ports are only intended for charging devices which are compatible with the USB-A Charging Ports technical data printed on the filter: Output: DC – direct current and voltage provided in Volts. Max total load: – maximum total load when all USB-A Charging Ports are used simultaneously. [Maximum load for a single USB-A Charging Port = the Max total load divided by a number of devices being charged]. The total load generated by all devices connected to the charger must not exceed the Maximum total load.
• The number of devices which may be charged simultaneously is limited to the number of USB-A Charging Ports this filter is equipped with. Never connect more than 1 device to a single USB-A Charging Port.
• When charging, use only a recommended USB cable for your device and replace faulty cables immediately.

4. Turn on your audio-video equipment and enjoy your system.
5. Reset: The Power Output Sockets will be powered off when the maximum power load is exceeded (check on the rear panel or in specifications). Press the RESET button to restore the power supply.

⚠️ When you want to turn off the power filter, we recommend to turn off your audio-video equipment firstly.

⚠️ This power filter is not an Uninterruptible Power Supply unit (UPS). It will not operate when the input power source fails (no power or too low voltage).

Kit Content

• Power Filter: 1 EA
• Power Cable: 1 EA
• Instruction Manual: 1 EA

EU Declaration of Conformity

CE Your product is marked with the symbol shown on the left. As its manufacturer, we hereby declare that the product is in compliance with the following EU directives and regulations: 2014/30/EU (EMC) & 2014/35/EU (LVD) & 2011/65/EU (RoHS). The full text of the EU declaration of conformity is available from the manufacturer.

Disposal of the product

Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate collection systems)

♻️ This symbol on the product or on its literature and packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local government office, your household waste disposal service, or the shop where you purchased the product.

Manufacturer Information

TAGA EUROPE POLPAK POLAND Sp. z o.o.

AL. JEROZOLIMSKIE 331A

05-816 REGULY k/WARSZAWY, POLAND

Email: Sales@TagaHarmony.com

www.TagaHarmony.com