JBL Legend Headunit Quick Start Guide

Main Menu

In the main menu, press the desired icon to enter the corresponding mode: Radio/Bluetooth/Apple CarPlay/Android Auto/USB/AV IN/Settings.

Audio Operation

Press the Settings icon on the main menu screen to adjust Fader and Balance controls, Equalizer (10-Band Tone Control and 10 Presets EQ Settings).

Tuner Operation

FM Radio

• 1: Preset Stations
• 2: Seek Tune Down
• 3: Seek Tune Up
• 4: FM/AM (FM1, FM2, FM3, AM1, AM2)
• 5: Local/Distance
• 6: Main Menu
• 7: Preset
• 8: Auto Store Presets/Preset Scan
• 9: Frequency Scale
• 10: RDS
• 11: Keypad
• 12: Equalizer
• 13: Volume adjustment

General Operation

From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the bottom of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen.

CarPlay Operation

Connect your iPhone to the USB port then touch OK on your Phone when the pop-up message appears to allow interface accessories. The Apple CarPlay icon will now be enabled on the main menu.

Requirements:

• Lightning Data Cable
• iPhone 5s or later
• iPhone with iOS 7.1 or later
• Data Plan
• May need to set permissions for the CarPlay app on your phone (Settings > Contents > Allowed app).

Phone Setup (Before you begin):

• Apple CarPlay® features may operate differently than on your Apple iPhone®.
• Message and data charges may apply when using Apple CarPlay. Please check with your mobile carrier.
• Apple CarPlay® relies on the performance of your phone. If you experience performance issues: Close all apps and restart them, or disconnect and reconnect your phone using the Apple Lightning cable.
• When Apple CarPlay® is active, your voice recognition system is disabled and you will be using Siri.
• On your phone, go to Settings > General > Restrictions > CarPlay to allow CarPlay access.
• On your phone, go to Settings > General > Siri and ensure Siri is turned ON.
• On your phone, go to Settings > General > CarPlay to adjust the position of icons displayed on the car, with or without. The option with "x" can be deleted, and the search can be done by clicking the "+" sign below.

Voice Command Button

Ensure Siri feature is set to ON in your phone (Go to Settings > General > Siri). Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by touching and holding the Home icon on the CarPlay screen or pressing the Voice button on the panel or steering wheel, then say any of the following commands: "Text 'Call you later'" to send a text message. "Read text messages" to read available text messages. "Call " to make a phone call. "Find " to locate a POI/Destination.

USB Operation

From the main menu, touch the USB icon on the main screen.

Media Playback Controls:

• Progress bar
• Previous Track
• Play/Pause ▶️
• Next Track
• Random
• Repeat
• Main Menu
• Playlist
• Audio Source
• Video
• Picture
• Keypad
• Equalizer
• Volume adjustment

Bluetooth Operation

Before using Bluetooth:

Before you can use a Bluetooth device to make hands-free calls or stream audio, it must be authenticated. This is also referred to as "pairing" a device.

Pairing a New Device:

After enabling the BT pairing function, other devices can search for the unit for 3 minutes; the unit can search for other devices constantly.

Connection:

The head unit will automatically connect to the last connected device when the connection feature is set to Auto Connect On. If the connection feature is set to Auto Connect Off, the head unit will not automatically connect to any device.

Bluetooth Phone:

• Dialing a Number: Press [keypad] to display keypad and dial a number.
• Making and Ending a Call: Press [call] to connect a call, and press [end call] to end a call.
• Transferring Audio: Press [transfer audio] to transfer sound between the head unit and mobile phone.

Streaming Audio:

• Press [play/pause] to play or pause the music.
• Press [previous track] to skip to the previous track.
• Press [next track] to advance to the next track.

Wiring Diagram - Inputs/Outputs

A detailed wiring diagram is provided, showing connections for power (12V, ACC, Ground), speakers (Front L/R, Rear L/R), antenna, reverse camera, AV input, and other control signals.

Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses a 15 amp ATC mini style fuse located on the power connector.

Control Locations

The radio display features the following functions and displays:

• 1: Reset
• 2: Long press: in on mode, power off; Short press: In on mode, Mute on/off; In off mode, power on.
• 3: Home
• Voice Activation Button
• 5: VOL+
• 6: VOL-

Android Auto Operation

Connect your Phone to the USB port then touch OK on your Phone when the pop-up message appears to allow interface accessories. The Android Auto icon will now be enabled on the main menu.

Requirements:

• USB Data Cable
• Compatible Android phone with OS Android 5.0 or higher
• Data Plan
• Android Auto App download from Google Play® store
• Android Auto must be available in your country or region.

Phone Setup (Before you begin):

• Android Auto® features may operate differently than on your Android® phone.
• Message and data charges may apply when using Android Auto. Please check with your mobile carrier.
• Android Auto relies on the performance of your phone. If you experience performance issues: Close all apps and restart them again or disconnect and then reconnect your phone using the USB cable that was provided with your phone is recommended.
• When Android Auto is active, your in-vehicle voice recognition system is disabled and you will be using Google® voice actions to make your requests.

Voice Command Button:

With your Google Assistant on Android Auto, you can keep your eyes on the road and your hands on the wheel while using your voice to help you with your day. Simply say, "Ok Google," or in compatible cars, long press the voice control button on your steering wheel. Such as making a Call: Touch the Phone icon to access recent call list. Or you can initiate a voice action and then say "Call " or "Dial " to make phone calls from any screen.

Overview:

Android Auto organizes recent actions and information into simple cards on the Android Auto Home screen. Touching an actionable card will take you to the app.

SPECIFICATIONS

FCC Radiation Exposure statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.