The FireProtect 2 (Heat/CO) Jeweller is a wireless fire detector with a built-in siren, designed for indoor installation. It detects temperature rise and dangerous carbon monoxide (CO) levels, and can operate without a hub.
Available in two modifications: with sealed batteries (SB in the name) lasting 10 years, and with replaceable batteries (RB in the name) lasting up to 7 years. The detector communicates with the Ajax system via the Jeweller secure radio protocol, with a hub communication range of up to 1,700 meters without obstacles.
Explore the functional elements of the detector, including the Test/Mute button, SmartBracket mounting panel, Tamper button, and LED indicators. Understand the operating principles of the heat and CO sensors, and how the detector provides alarms and notifications.
Learn how to connect the FireProtect 2 to an Ajax hub using the Ajax app, and how to set up interconnected fire detector alarms for synchronized notifications. The detector also supports autonomous operation mode, providing alerts via its built-in siren and LED indication.
For detailed information on installation, operation, and troubleshooting, refer to the relevant sections within this manual.
Discover more about compatible hubs and range extenders at Ajax Systems.
Key Features:
- Detects fire (temperature rise) and dangerous CO levels.
- Built-in siren for audible alarms.
- Wireless communication via Jeweller radio protocol.
- Two battery modifications: 10-year sealed or 7-year replaceable.
- Tamper protection against unauthorized removal.
- Supports interconnected alarms and automation scenarios.
- Can operate autonomously without a hub.
mailto:support@ajax.systems
Telegram: Launch @AjaxSystemsSupport_Bot
