BRESSER Thermo-/Hygrosensor with LCD Display (Art. No. 7009985)

General Warnings

DANGER!

This device contains electronic components powered by batteries. Children should not use unattended. Risk of electric shock if not used as described.

Children must use under adult supervision. Keep packaging material away from children (choking hazard).

Keep batteries away from children. Ensure correct polarity. Leaking or damaged batteries can cause burns. Use protective gloves if necessary.

DANGER!

Do not expose to high temperatures. Use recommended batteries. Do not short-circuit, throw into fire. Excessive heat or improper handling can cause short-circuits, fires, or explosions.

NOTE!

Do not disassemble. Contact dealer for defects. Dealer will contact Service Center for repair.

Use only recommended batteries. Always replace weak/empty batteries with new ones of full capacity. Do not mix brands, types, or capacities. Remove batteries if not used for a long time.

NOTES ON CLEANING

Disconnect from power (remove batteries) before cleaning.

NOTE!

Clean exterior only with a dry cloth. Do not use cleaning fluid to avoid damaging electronics.

Scope of Delivery

• Outdoor sensor
• Instruction manual
• Batteries required (not included): 2 pcs. batteries (1.5V, type AAA)

Features of the Remote Unit

A: LCD Display (on front side)

Displays temperature, humidity, and selected channel.

B: LED Indicator (on front side)

Flashes when signals are transmitted.

C: Wall Mount

For mounting the sensor on walls.

D: °C/°F Button

Display temperature in °C or °F.

E: Set Transmission Channel (1-3)

Set channel before inserting batteries.

F: Battery Compartment

Unit requires 2 x UM-4 or "AAA" 1.5V batteries.

G: Battery Compartment Cover

Unit requires 2 x UM-4 or "AAA" 1.5V batteries.

First Operation

1. Open the battery compartment cover.
2. Set the desired channel with the switch. If using only one transmitter, leave selection at "1".
3. Insert 2 new UM-4 or "AAA" 1.5V batteries, observing correct polarity.
4. Use a pin to press the "RESET" button located in the battery compartment.
5. Close the battery compartment cover and place the unit in the desired location.

Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain, or snow.

Tips for Setting Up

1. Assign each external transmitter unit its own channel.
2. Place receiver and transmitter units within 1 meter of each other. Activate manual search for signals on the main unit (weather station not included).

Technical Data

Measurement

• Temperature range: -20 to 60 °C (-4 to 140 °F)
• Temperature steps: 0.1 °C/°F
• Humidity range: 20-95% RH
• Humidity steps: 1%

Transmission

• Transmission frequency: 433.92 MHz
• Maximum transmission power: < 10mW
• Transmission range: 80 meters (free field)

Power Supply

• 2 x AAA 1.5V batteries (not included)

Disposal

Dispose of packaging materials properly according to type (paper, cardboard). Contact local waste-disposal service or environmental authority.

Do not dispose of electronic devices in household garbage. As per European Directive 2002/96/EC, used electronic devices must be collected separately and recycled environmentally.

Batteries and rechargeable batteries must not be disposed of in normal household waste. Dispose of used batteries as required by law at a local collection point or retail market. Disposal in domestic waste violates the Battery Directive.

Battery Marking

Batteries containing toxins are marked with a sign and chemical symbol:

• Cd¹: Battery contains Cadmium
• Hg²: Battery contains Mercury
• Pb³: Battery contains Lead

EC Declaration of Conformity

CE Mark

Bresser GmbH declares that the equipment type with part number 7009985 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.bresser.de/download/7009985/CE/7009985_CE.pdf

Warranty & Service

Standard warranty period is 2 years from purchase date. Extended voluntary warranty requires registration on the website.

Full warranty terms and service information available at: www.bresser.de/warranty_terms