User Guide

Larvik Studio Stand for 45-65 TVs

Model Numbers: KALKTVSTNDA, KALKTVSTNBA & KALKTVSTNWA

Safety & Warnings

• Carefully read all instructions before beginning installation or use. Keep this user guide for future reference.
• Not following these instructions may lead to property damage, serious injury, or death.
• Do not exceed the rated weight limit, which includes the TV, screws, and any attached hardware or accessories. Doing so may result in instability and potential injury.
• This product is intended for installation on wood stud walls, solid concrete, or brick surfaces only.
• Indoor use only. Using the product outdoors may result in failure or injury.
• The product includes small parts that may pose a choking hazard if swallowed. Keep all small components and packaging materials out of reach of young children.
• This is not a toy. Ensure children do not play near the stand without direct adult supervision.
• If you are uncertain about any part of the installation, consult a licensed professional or visit help.kogan.com for assistance.
• The wall or surface used for mounting must be strong enough to support the combined weight of the mount and display. Reinforce the structure if necessary.
• It is strongly advised to use the provided wall anchoring kit during installation to prevent tipping, which could result in damage, injury, or death. Not securing the product to a wall is done at your own risk.
• Always use appropriate safety gear, safe work practices, and the correct tools. A minimum of 2 people is required for installation. Neglecting these safety measures may cause damage or serious harm.
• Inspect all joints every 3 months and tighten any loose screws before continued use.

Preventing Furniture Tip-Over

• To ensure maximum stability and safety, it is highly recommended to secure this product to a wall using the included wall anchoring kit.
• Periodically inspect all wall anchors to ensure they remain firmly in place.
• The stability of tall furniture items may vary depending on the type and condition of the floor surface.
• Before drilling into any wall, check for electrical wiring or plumbing. If you are uncertain about what lies behind the wall, consult a qualified tradesperson for assistance.

DANGER Children have died from furniture toppling over.

To help prevent tip over:

• NEVER allow children to stand, climb or hang on TV stands.
• Ensure the TV is properly anchored to the TV stand before use around children.

Components

A Side Legs (L/R) (x2)

B Rear Support Leg

C Upper Crossbar

D Lower Crossbar

E Central Vertical Support Pole

F ST4.2x12 Screw (x2)

G Cable Routing Clip (x2)

H 4mm Allen Key

P-A Anti-Tip Cable

P-B Cable Clip (x2)

P-C Wall Mounting Plate (x2)

P-D 2mm Allen Key

P-E ST4.8x38 Screw (x4)

P-F Ø7x35 Wall Anchor (x4)

P-G D5 Washer (x2)

M-A M6x14 Bolt (x4)

M-B M8x14 Bolt (x4)

M-C M6x30 Bolt (x4)

M-D M8x30 Bolt (x4)

M-E M8x50 Bolt (x4)

M-F Washer Plate (x4)

M-G Small Spacer (x8)

M-H Large Spacer (x8)

Assembly

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Ensure the screen doesn't touch the aluminium plate. The stand allows for ±180° swivel.

Step 8

Wall Mounting Instructions:

• Measure and mark the desired height on the wall (1100-1350mm from the floor).
• Ensure the mounting location is suitable for the wall type (wood stud, solid concrete, or brick).
• Drill holes of appropriate size (e.g., 7mm Ø for wall anchors).
• Attach the Wall Mounting Plates (P-C) to the wall using Wall Anchors (P-F) and Screws (P-E).
• Attach the Anti-Tip Cables (P-A) to the TV and the wall mounting plates using the provided hardware (P-D, P-B).

Dimensions

Note: Design and specifications are subject to change without notice.

Notes