VTech Sleepy Sloth Cot Light

Introduction

Soothe your baby with the VTech® Sleepy Sloth Cot Light. Press the buttons to play soothing responses that calm your little one and send them into relaxation. Responses include 3 sing-along lullabies, 40 calming melodies & relaxing nature sounds. Choose between the two modes to play either music or sounds.

The VTech Sleepy Sloth Cot Light is a white, spherical baby product with a sloth illustration in the center. It features various buttons and indicators on its surface, including a strap for attachment. Key components labeled are: Sound Sensor, Attachment Strap, Light Projector, Timer Switch (OFF, 15 mins, 45 mins), Volume Up Button (+), Volume Down Button (-), Lullaby Mode Button, Nature Sounds Mode Button, Light Control Button, and Night Light.

VTech's Product Philosophy

VTech understands that a child's needs and abilities change as they grow. With this in mind, VTech develops toys to teach and entertain at just the right level.

VTech Baby

Toys that stimulate interest in different textures, sounds, and colours. For ages Birth-36 months, focusing on responding to stimuli, understanding cause and effect, and learning motor skills like touching, reaching, grasping, sitting up, crawling, and toddling.

Pre-School

Interactive toys to develop imagination and encourage language development. For ages 3-6 years, focusing on preparing for school, learning the alphabet and counting, making learning fun, and developing creativity through drawing and music.

Electronic Learning Computers

Cool, aspirational, and inspiring computers for curriculum-related learning. For ages 4-10 years, focusing on challenging activities, intelligent technology that adapts to learning levels, and National Curriculum-based content.

Included in the Package

• One VTech® Sleepy Sloth Cot Light
• One Quick Start Guide
• One attachment strap

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child's safety.

NOTE: Please save this Instruction Manual as it contains important information.

WARNING! Attach this toy out of the reach of the child. To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position.

Instructions: Battery Removal and Installation

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 3 new AA (AM-3/LR6) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.
5. Replace the battery cover and tighten the screw to secure.

WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.

Diagram shows a screwdriver loosening a screw on the battery compartment cover on the back of the unit. Another illustration shows the cover being opened, revealing battery slots.

Important: Battery Information

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

Rechargeable Batteries

• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Disposal of Batteries and Product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicate they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd, or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd), or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.

Responsible Disposal

Please dispose of your product and batteries responsibly.

In the UK, give this toy a second life by disposing of it at a small electricals collection point so all of its materials can be recycled. Learn more at: www.vtech.co.uk/recycle, www.vtech.com.au/sustainability.

* Visit www.recyclenow.com to see a list of collection points near you.

Notes on Attachment

• Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a cot or playpen according to the instructions. Check frequently. Attach only to cots with sturdy rails and spindles. Do not attach to play pens with mesh walls.
• Do not add additional strings or straps to attach to a cot or playpen.
• To ensure your child's safety, the product should be assembled by an adult.
• When removing the Cot Light from the cot, please detach the cot attachment straps from the unit, and keep the straps out of your child's reach.

Assembly Instructions

With the VTech® Sleepy Sloth Cot Light, safety comes first. To ensure your child's safety, adult assembly is required.

1. Place the unit in the cot bringing the strap over the top rail. Slip the top of the strap under the slot on the back of the strap and secure.
2. You can adjust the hanging height by choosing the appropriate hole on the strap.
3. Pull slightly on the unit to make sure the strap has been securely fastened. The unit should be snug against the cot rail. Please check the unit frequently to ensure it is still secure.

Diagrams illustrate the process of attaching the strap over a cot rail, adjusting its height using pre-made holes, and securing the unit snugly against the rail.

Product Features

1. OFF/15mins/45mins Switch: To turn the unit On, slide the switch to the 15mins or 45mins position. To turn the unit Off, slide the switch to the Off position.
2. Volume Controls: To adjust the volume, press the Volume Down Button (-) or the Volume Up Button (+).
3. Light Control Button: Press the Light Control Button to choose between the night light and the light projection.
4. Sound Sensor: The VTech® Sleepy Sloth Cot Light is equipped with a special Sound Sensor. Once the set time is up, the unit will automatically shut off. The sensor will reactivate the program when it detects baby's cry for approximately 2 seconds without interruption. The unit will reactivate and play lullabies or nature sounds.

Illustrations show finger presses on the timer switch, volume buttons, and light control button.

Product Features (Continued)

5. Automatic Shut Off: To preserve battery life, the Sleepy Sloth Cot Light will automatically shut off after the timer has expired. The unit can be reactivated by pressing any button, or when baby cries.

NOTE: If the unit powers down while playing, we suggest changing the batteries.

Activities

1. Lullaby Mode Button: Press the Lullaby Mode Button to hear sing-along songs, phrases, and soothing melodies. The projector will light up and the night light will glow.
2. Nature Sounds Mode Button: Press the Nature Sounds Mode Button to hear soothing sounds. The projector will light up and the night light will glow.

Illustrations show finger presses on the lullaby mode button and the nature sounds mode button.

Melody List

1. Canon in D - Pachelbel
2. Eine Kleine Nachtmusik – Mozart
3. Für Elise - Beethoven
4. Greensleeves – Anon
5. Happy Farmer - Schumann
6. Kinderszenen - Schumann
7. Magic Flute - Mozart
8. Minuet in G - Bach
9. Moonlight Sonata – Beethoven
10. Morning Mood (Peer Gynt) – Grieg
11. Piano Sonata in C – Mozart
12. Serenade – Hadyn
13. Sleeping Beauty Waltz – Tchaikovsky
14. Twinkle, Twinkle Little Star
15. Rondo a Capriccio – Beethoven
16. Ode to Joy – Beethoven
17. Hickory, Dickory, Dock
18. Lullaby – Brahms
19. Sweet Adeline
20. Roses Are Red
21. Spring Song – Mendelssohn
22. Toyland
23. Air - Bach
24. Hush Little Baby
25. Mary Had a Little Lamb
26. Row, Row, Row Your Boat
27. Swan Lake – Tchaikovsky
28. Au Clair de la Lune
29. Cradle Song – Mozart
30. To a Wild Rose – MacDowell
31. Prelude - Fugue No. 1 – Bach
32. New World Symphony - Dvorak
33. Good Morning Merry Sunshine
34. Here We Go 'Round the Mulberry Bush
35. Nocturne Op. 9 No. 2 – Chopin
36. Diddle Diddle Dumpling
37. Turkish March – Mozart
38. Oh, Dear! What Can the Matter Be?
39. Frère Jacques
40. The Blue Danube Waltz - Strauss

Song Lyrics

Song 1

Oh, don't you want to go to sleep,
Go to sleep, go to sleep,
Oh, don't you want to go to sleep,
And wake up feeling fresh.

Song 2

Rock-a-bye baby, now go to sleep,
Let's play sweet music and count some sheep,
Tomorrow will be a brand new day,
And up will be baby ready to play.

Song 3

Go to sleep, go to sleep, go to sleep my sweet baby.

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

Troubleshooting

If for some reason the program/activity stops working or malfunctions, please follow these steps:

1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the product still does not work, install a brand new set of batteries.

If the problem persists, please contact the VTech Consumer Services Department and a service representative will be happy to help you.

Consumer Services

Creating and developing VTech® products is accompanied by a responsibility that VTech® takes very seriously. VTech makes every effort to ensure the accuracy of the information, which forms the value of its products. However, errors sometimes can occur. It is important for customers to know that VTech stands behind its products and encourages customers to call the VTech Consumer Services Department with any problems and/or suggestions. A service representative will be happy to help.

UK Customers:

Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support

Australian Customers:

Phone: 1800 862 155
Website: support.vtech.com.au

NZ Customers:

Phone: 0800 400 785
Website: support.vtech.com.au

Product Warranty/Consumer Guarantees

UK Customers:

Read the complete warranty policy online at vtech.co.uk/warranty.

Australian Customers:

VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES

Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Further Information

Visit our website for more information about our products, downloads, resources, and more.

www.vtech.co.uk

www.vtech.com.au

TM & © 2022 VTech Holdings Limited. All rights reserved. IM-540300-000 Version:0