IKEA BÄVE LED Ceiling Track, 5 Spots

Product Overview

This document provides installation and safety instructions for the IKEA BÄVE LED ceiling track with 5 spots.

An illustration shows the BÄVE LED ceiling track with five adjustable spotlight heads.

Safety Information & Precautions

General Cautions

CAUTION: Before starting installation, turn off power at the main circuit panel.

CAUTION: The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.

Cleaning Instructions

Use a damp cloth for cleaning. Never use a strong cleaning agent.

General Warnings

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

SAVE THESE INSTRUCTIONS

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Assembly Instructions

Illustrations depict the assembly process. The first illustration shows a person looking confused at product parts, with a question mark symbol. The second illustration shows a person successfully connecting parts, with the IKEA store logo visible in the background.

Step 1: Electrical Connections

Identify the wires: Live (also referred to as Phase or Con corriente), Neutral (also referred to as Neutre or Neutro), and Earth/Ground (also referred to as Terre or Tierra).

Connect the wires to the corresponding terminals on the fixture. The diagram shows three wires being connected.

Diagram Description: Electrical connections showing Live, Neutral, and Earth/Ground wires being connected to the fixture.

Step 2: Mounting the Fixture

Mount the fixture to the ceiling track. The diagram shows the fixture being attached and secured with screws.

Diagram Description: The fixture is shown being mounted to a ceiling track and secured with screws.

Adjusting Spotlight Heads

Illustrations demonstrate how to adjust the spotlight heads. The first shows rotation in two directions (left/right), and the second shows tilting up/down.

Diagram Description: Illustrations showing how to adjust the spotlight heads, allowing for rotation and tilting.