Anslut Air Cooler Operating Instructions
This manual provides comprehensive instructions for the safe operation and maintenance of the Anslut Air Cooler (Item no. 013880).
Safety Instructions
For indoor use only. Unpack the product and check for any missing or damaged parts. Children aged eight and above, and individuals with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge, may use this product if supervised or instructed on safe use and the associated risks. Children should not play with the product. Keep packaging material out of reach of children and pets to prevent suffocation. The product is intended for room ventilation and should not be used for any other purpose. Do not use the product in a bathroom. Never insert objects into the product grille. Do not touch the product with wet hands or body parts. Do not carry or pull the product by the power cord. Do not pull the power cord to unplug. Switch off the product, unplug it, and wait for all moving parts to stop completely before cleaning or maintenance. Repairs should only be carried out by an authorized service center.
Symbols:
- Safety class II.
- Approved in accordance with relevant directives/regulations.
- End-of-life products should be recycled according to applicable regulations.
Technical Data
Description | Symbol | Value | Unit |
Maximum fan flow rate | F | 4.26 | m³/min |
Fan power input | P | 49.90 | W |
Service value | Sv | 0.09 | (m³/min)/W |
Standby power consumption | PSB | 0.20 | W |
Sound power level | LWA | 57.63 | dB(A) |
Maximum flow speed | C | 1.08 | m/s |
Annual power consumption | kWh/a | 18.11 | kWh/a |
Measurement standard for service value: IEN ISO 5801:2008
Contact details: www.jula.com
Description
- Control panel
- Filter panel
- Cover for water reservoir
- Water container
- Ice packs
- Link wheel
Control Panel
SPEED
Press the SPEED button to select the speed and air flow (3 modes).
STYLE
Press the STYLE button to switch between normal function and night mode.
- Symbol MOON = 15 min on medium, rest of the time on low.
- Symbol LEAF = sequence. Three sequences depending on the speed.
TIMER
Press TIMER when the fan is running to set automatic switching off from 1 to 7 hours, or when the fan is in standby, to automatically start in 1 to 7 hours.
EVA/COOLER
Press the level control button EVA/COOLER to check the water level. If the status light stays on, there is enough water. If the status light flashes, add water immediately.
Remote Control
- Air speed
- Oscillation
- Air flow
- ON/OFF
- Humidification/cold air
- Timer
Assembly
WHEEL
Fit the wheels in the holes in the bottom of the air cooler.
Battery
The remote control needs a battery to work. It can be used up to five meters away when pointed at the product (normally handles a deviation of 30 degrees).
- Open the battery cover.
- Take out the battery holder.
- Insert the battery with the positive terminal facing up.
- Push the battery holder into the remote control.
Use
- Make sure that the ice packs are frozen.
- Put the ice packs in the water container with water.
- Plug the air cooler into a power point.
- Select the required setting with the control panel or remote control.
Maintenance
NOTE:
Switch off the product and pull out the plug before cleaning.
- The filter panel and dust filter must be cleaned regularly to ensure adequate air flow.
- Clean the product with a cloth moistened with water and a mild detergent. Wipe with a cloth or sponge moistened with water and dry with a dry cloth.
- Do not use abrasive detergents, petrol, thinners, or other solvents that can damage the product's surface.
- Ensure that no water or other liquid enters the motor housing or other parts of the product.